● Coastal and marine regions are the most studied for microplastic pollution.

The research on the extent and effects of microplastics pollution in the Global South is only getting started. Bangladesh is a South Asian country with one of the fastest growing economies in the world, however, such exponential economic growth has also increased the pollution threats to its natural and urban environment. In this paper, we reviewed the recent primary research on the assessment of the extent of microplastics pollution in Bangladesh. From the online databases, we developed a compilation of emerging research articles that detected and quantified microplastics in different coastal, marine, and urban environments in Bangladesh. Most of the studies focused on the coastal environment (e.g., beach sediment) and marine fish, while limited data were available for the urban environment. We also discussed the relationship of the type of anthropogenic activities with the observed microplastic pollution. The Cox’s Bazar sea beach in south-east Bangladesh experienced microplastics pollution due to tourism activities, while fishing and other anthropogenic activities led to microplastics pollution in the Bay of Bengal. While microplastics larger than 1 mm were prevalent in the beach sediments, smaller microplastics with size below 0.5 mm were prevalent in marine fish samples. Moreover, the differences in microplastic abundance, size, shape, color, and polymer type found were depended on the sampling sites and relevant anthropogenic activities. It is imperative to identify major sources of microplastics pollution in both natural and urban environment, determine potential environmental and human health effects, and develop mitigating and prevention strategies for reducing microplastics pollution.

• The first study on micro(meso)plastics (MMPs) in the Liaohe River Reserve is reported.

Microplastics pollution has received growing attention worldwide in recent years. However, data on microplastics in the freshwater environment are still limited, especially in high-latitude nature reserves in Northern China. The first study on microplastic pollution in the Liaohe River Reserve in Northern China is reported here, and mesoplastics were also incorporated. Surface water and sediment samples were collected from 32 sites along the nature reserve. The abundance, type, shape, color, and size of micro- and mesoplastics were measured using density extraction, optical microscopy, and FTIR spectroscopy. The data showed that diverse micro- and mesoplastics were found widespread in the 32 sites, and the average abundance of these plastics was 0.11±0.04 10⁻² items/L in surface water and 62.29±54.30 items/kg in sediment. Moreover, 70% and 66% were smaller than 2000 μm in surface water and sediment, respectively. Fiber accounted for 91.86% in surface water and 43.48% in sediment, indicating that the major source of micro- and mesoplastics in the Liaohe River Reserve may be domestic sewage and aquaculture. A total of 16 and 27 polymers were identified in surface water and sediment, respectively, and mostly consisted of rayon, polyester, polystyrene, and poly(ethylene terephthalate). Moreover, both the risk index and the pollution load index demonstrated a low risk of micro- and mesoplastics in surface water and sediment in the Liaohe River Reserve.

• Fate of microplastics in integrated membrane system for water reuse was investigated.

Rare information on the fate of microplastics in the integrated membrane system (IMS) system in full-scale wastewater treatment plant was available. The fate of microplastics in IMS in a coastal reclaimed water plant was investigated. The removal rate of microplastics in the IMS system reached 93.2% after membrane bioreactor (MBR) treatment while that further increased to 98.0% after the reverse osmosis (RO) membrane process. The flux of microplastics in MBR effluent was reduced from 1.5 × 10¹³ MPs/d to 10.2 × 10¹¹ MPs/d while that of the RO treatment decreased to 2.7 × 10¹¹ MPs/d. Small scale fiber plastics (<200 μm) could break through RO system according to the size distribution analysis. The application of the IMS system in the reclaimed water plant could prevent most of the microplastics from being discharged in the coastal water. These findings suggested that the IMS system was more efficient than conventional activated sludge system (CAS) for the removal of microplastics, while the discharge of small scale fiber plastics through the IMS system should also not be neglected because small scale fiber plastics (<200 μm) could break through IMS system equipped with the RO system.

• MPs in the coastal sediment of south-east coast of India are quantified.

In view of increasing Microplastics (MPs) contamination in the marine environment and dearth of baseline data, a study was conducted on the abundance, characterization, and seasonal distribution of MPs in the nearshore sediments of the south-east coast of India. Sediment samples (n = 130) were collected at a distance of 1 km and 10 km from the shore region at varying depths (8–45 m) along the Chennai to Puducherry coast (165 km stretch), representing two seasons, i.e., south-west (July 2019 and July 2020) and north-east (January 2020) monsoons. The average abundance of MPs at the 22 offshore sites along the Chennai to Puducherry coast varied from 9±4.3 to 19±12.9 particles/50 g dry weight, in July 2019 and January 2020, respectively. July 2020 had an average abundance of 10±4.5 particles/50 g dry weight. Spatially, high levels of MPs were found at 1km stations and transects in proximity to the river inlets, and temporally, the north-east month recorded the maximum concentration. The dominant morphotype was the filament, and the major polymers were polyethylene and polypropylene. Scanning Electron Microscope (SEM) images revealed the surface irregularity and degradation of MPs due to weathering. The study highlights that high sediment contamination by MPs occurs during heavy rainfall and accumulates closer to river inlets. Eventually, this study suggests that appropriate management of plastic wastes on the landside will reduce MP contamination in the marine environment.

Plastic pollution has been a legacy environment problems and more recently, the plastic particles, especially those ultrafine or small plastics particles, are widely recognized with increasing environmental and ecological impacts. Among small plastics, microplastics are intensively studied, whereas the physicochemical properties, environmental abundance, chemical states, bioavailability and toxicity toward organisms of nanoplastics are inadequately investigated. There are substantial difficulties in separation, visualization and chemical identification of nanoplastics due to their small sizes, relatively low concentrations and interferences from co-existing substances (e.g., dyes or natural organic matters). Moreover, detection of polymers at nanoscale is largely hampered by the detection limit or sensitivity for existing spectral techniques such as Transformed Infrared Spectroscopy (FTIR) or Raman Spectroscopy. This article critically examined the current state of art techniques that are exclusively reported for nanoplastic characterization in environmental samples. Based on their operation principles, potential applications and limitations of these analytical techniques are carefully analyzed.

• A high abundance of floating MPs was found in the southern South China Sea.

Surrounded by emerging markets with considerable plastic consumption, the South China Sea has been a focus area of microplastic research. A survey on the floating microplastics (>0.3 mm) and microplastics ingested by fish and mollusks was conducted around three remote islands here. Compared with the results from several previous studies, a high abundance of floating microplastics (with a median of 1.9 × 10⁵ items/km² or 0.7 items/m³) was observed, revealing another “hot spot” for microplastics. Polyolefin, especially polypropylene, was the main component. The diversity index and evenness index were calculated and evaluated based on the composition of microplastics. The characteristic peaks of Raman spectra concerning pigmented microplastics were provided. Transparent sheets/films were predominant in the water sample, which was quite different from a similar study in this sea area (8.9% for film), and only 16.4% of floating microplastics (>0.3 mm) were fibers/lines, implying that the main sources of floating microplastics (>0.3 mm) might be household/agricultural consumption activities. The transparent fiber/line was also dominant in organisms. It is suggested that the main sources of microplastics ingested by organisms might be both fabric fibers and fishing/aquaculture.

• Fluorescence staining provides a fast and easy method to quantify microplastics.

Understanding the fate and toxicity of microplastics (MPs,<5 mm plastic particles) is limited by quantification methods. This paper summarizes the methods in use and presents new ones. First, sampling and pretreatment processes of MPs, including sample collection, digestion, density separation, and quality control are reviewed. Then the promising and convenient staining procedures and quantification methods for MPs using fluorescence dyes are reviewed. The factors that influence the staining of MPs, including their physicochemical properties, are summarized to provide an optimal operation procedure. In general, the digestion step is crucial to eliminate natural organic matter (NOM) to avoid interference in quantification. Chloroform was reported to be the most appropriate solvent, and 10–20 μg/mL are recommended as optimal dye concentrations. In addition, a heating and cooling procedure is recommended to maintain the fluorescence intensity of MPs for two months. After staining, a fluorescence microscope is usually used to characterize the morphology, mass, or number of MPs, but compositional analysis cannot be determined with it. These fluorescence staining methods have been implemented to study MP abundance, transport, and toxicity and have been combined with other chemical characterization techniques, such as Fourier transform infrared spectroscopy and Raman spectroscopy. More studies are needed to focus on the synthesis of novel dyes to avoid NOM’s interference. They need to be combined with other spectroscopic techniques to characterize plastic composition and to develop image-analysis methods. The stability of stained MPs needs to be improved.

• Physical, chemical and biological methods are explored for MPs removal.

Microplastics are an emerging threat and a big challenge for the environment. The presence of microplastics (MPs) in water is life-threatening to diverse organisms of aquatic ecosystems. Hence, the scientific community is exploring deeper to find treatment and removal options of MPs. Various physical, chemical and biological methods are researched for MPs removal, among which few have shown good efficiency in the laboratory. These methods also have a few limitations in environmental conditions. Other than finding a suitable method, the creation of legal restrictions at a governmental level by imposing policies against MPs is still a daunting task in many countries. This review is an effort to place all effectual MP removal methods in one document to compare the mechanisms, efficiency, advantages, and disadvantages and find the best solution. Further, it also discusses the policies and regulations available in different countries to design an effective global policy. Efforts are also made to discuss the research gaps, recent advancements, and insights in the field.

• MPs were analyzed throughout three WWTPs with mixed domestic–industrial influents.

In wastewater treatment plants (WWTPs), microplastics (MPs) are complex, especially with mixed domestic–industrial influents. Conventional random grab sampling can roughly depict the distribution and characteristics of MPs but can not accurately reflect their daily fluctuations. In this study, the concentration, shape, polymer type, size, and color of MPs were analyzed by micro-Raman spectroscopy (detection limit of 0.05 mm) throughout treatment stages of three mixed domestic–industrial WWTPs (W1, W2, and W3) in Wuxi City, China, and the daily fluctuations of MPs were also obtained by dense grab sampling within 24 h. For influent samples, the average MP concentration of 392.2 items/L in W1 with 10% industrial wastewater was much higher than those in W2 (71.2 items/L with 10% industrial wastewater) and W3 (38.3 items/L with 60% industrial wastewater). White polyethylene granules with a diameter less than 0.5 mm from plastic manufacturing were the most dominant MPs in the influent of W1, proving the key role of industrial sources in MPs pollution. In addition, the daily dense sampling results showed that MP concentration in W1 influent fluctuated widely between 29.1 items/L and 4617.6 items/L within a day. Finally, few MPs (less than 4.0 items/L) in these WWTPs effluents were attributed to the effective removal of wastewater treatment processes. Thus, further attention should be paid to regulating the primary sources of MPs.

• Total 174 subtypes of ARGs were detected by metagenomic analysis.

Microplastics existing widely in different matrices have been regarded as a reservoir for emerging contaminants. Mariculture systems have been observed to host microplastics and antibiotic resistance genes (ARGs). However, more information on proliferation of ARGs and metal resistance genes (MRGs) in mariculture system at the presence of microplastics is needed. This study used metagenomic analysis to investigate the distribution of ARGs and MRGs in water and microplastics of a typical mariculture pond. Total 18 types including 174 subtypes of ARGs were detected with the total relative abundances of 1.22/1.25 copies per 16S rRNA copy for microplastics/water. Chloramphenicol resistance genes were the dominant ARGs with the abundance of 0.35/0.42 copies per 16S rRNA copy for microplastics/water. Intergron intI1 was dominant gene among 6 detected mobile genetic elements (MGEs) with the abundance of 75.46/68.70 copies per 16S rRNA copy for water/microplastics. Total 9 types including 46 subtypes of MRGs were detected with total abundance of 5.02 × 10²/6.39 × 10² copies per 16S rRNA copy for water/ microplastics while genes resistant to copper and iron served as the dominant MRGs. Proteobacteria, Bacteroidetes, and Actinobacteria accounted for 84.2%/89.5% of total microbial community. ARGs with relatively high abundance were significantly positively related to major genera, MGEs, and MRGs. Microplastics in mariculture system could enrich most of MRGs and some ARGs to serve as potential reservoir for these pollutants. The findings of this study will provide important information on resistance gene pollution at presence of microplastics in the mariculture system for further proposing suitable strategy of environmental management.

• PP-MPs reduced the adsorption capacity of the bulk soil for Cd in aqueous medium.

Microplastics (MPs) are widely present in a variety of environmental media and have attracted more and more attention worldwide. However, the effect of MPs on the the interaction between heavy metals and soil, especially in soil fraction level, is not well understood. In this study, batch experiments were performed to investigate the adsorption characteristics of Cd in bulk soil and three soil fractions (i.e. particulate organic matter (POM), organic-mineral compounds (OMC), and mineral) with or without polypropylene (PP) MPs. The results showed that the addition of PP-MPs reduced the Cd adsorption capacity of the bulk soil in aqueous solution, and the effects varied with PP-MPs dose and aging degree. Whereas, the responses of the three fractions to PP-MPs were different. In presence of PP-MPs, the POM and OMC fractions showed negative adsorption effects, while the mineral fraction showed positive adsorption. For the bulk soil, POM and OMC fractions, the adsorption isotherm fitted to the Langmuir model better than the Freundlich model, whereas, the Freundlich isotherm model is more fitted for the mineral fraction. Combined with the comprehensive analysis of the partitioning coefficients, XRD and FTIR results, it was found that OMC fraction extremely likely play a leading role in the bulk soil adsorption of Cd in this study. Overall, the effect of MPs on adsorption capacity of the bulk soil for Cd may be determined by the proportion of POM, OMC, and mineral fractions in the soil, but further confirmation is needed.

• Polystyrene microplastic caused hormesis-like effects in Phaeodactylum tricornutum.

The effects of pristine polystyrene microplastics (pMPs) without any pretreatment at different concentrations (0, 10, 20, 50, and 100 mg/L) on Phaeodactylum tricornutum Bohlin at two initial algae densities (10⁵ and 10⁶ cells/mL) were assessed in this study. Hormesis-like effects were found when microalgae grew with pMPs. The results showed that pMPs inhibited microalgae growth under a high concentration of microplastics tolerated by individual algal cell (low initial algae density) (up to −80.18±9.71%) but promoted growth when the situation was opposite (up to 15.27±3.66%). The contents of photosynthetic pigments including chlorophyll a, chlorophyll c and carotenoids showed resistance to pMPs stress under a low initial algae density and increased with time, but the opposite was true under a high initial algae density. Compared with the low initial algae density group, Qp received less inhibition, and NPQ (heat dissipation) also decreased under the high initial algae density. Under the low initial algae density, OJIP parameters such as S_m, N, Area, Pi Abs, ѱ_o, φ_Eo, TRo/RC and ETo/RC were more perturbed initially and returned to the levels of the control group (without pMPs) over time, but they remained stable throughout the experiment at high initial algae density. These results show that microplastics in the marine environment may have different toxic effects on P. tricornutum at different growth stages, which is of great significance for understanding the impact of microplastics on marine microalgae and aquatic ecosystems.

• Portugal recycles 34% of the 40 kg/hab year of plastic packaging waste.

As a European Union (EU) member, Portugal must comply with reductions in plastic waste. In Portugal, the 330 items/100 m of beach litter, comprising up to 3.9 million pieces and of which 88% is plastic, is higher than the EU median (149 items/100 m) and must be reduced to 20 items/100 m (94%). Integrative measures are needed to reduce littering and improve plastics’ use and disposal under the circular economy. Of this 414 kt of plastic packaging waste, 163 kt were declared plastic packaging, 140 kt subjected to recycling, and 94 kt to energy recovery. The current recycling rate of plastic packaging (34%) should be improved to reach EU recycling averages (42%) and goals and to provide widespread benefits, considering revenues of 167 €/t. As a net importer of waste, Portugal could benefit from the valorization of imported waste. Besides increased recycling, pyrolysis and gasification could provide short-term alternatives for producing value-added substances from plastic waste, such as hydrogen, consistent with the National Plan of Hydrogen and improving ongoing regulations on single-use plastics. This manuscript provides an integrative view of plastics in Portugal, from use to disposal, providing specific recommendations under the circular economy.

• Microplastics are widely found in both aquatic and terrestrial environments.

Microplastics (MPs) are distributed in the oceans, freshwater, and soil environment and have become major pollutants. MPs are generally referred to as plastic particles less than 5 mm in diameter. They consist of primary microplastics synthesized in microscopic size manufactured production and secondary microplastics generated by physical and environmental degradation. Plastic particles are long-lived pollutants that are highly resistant to environmental degradation. In this review, the distribution and possible sources of MPs in aquatic and terrestrial environments are described. Moreover, the adverse effects of MPs on natural creatures due to ingestion have been discussed. We also have summarized identification methods based on MPs particle size and chemical bond. To control the pollution of MPs, the biodegradation of MPs under the action of different microbes has also been reviewed in this work. This review will contribute to a better understanding of MPs pollution in the environment, as well as their identification, toxicity, and biodegradation in the ocean, freshwater, and soil, and the assessment and control of microplastics exposure.