Cover illustration
The direct coal liquefaction follows radical reaction mechanism, and the product distributions are determined by varied reaction behavior of the radicals. Among them, the release of free radical is mainly related to the chemical bond composition of the organic structure in coal, and lignite contains a large amount oxygen, which generates oxygenated aromatic compounds in thermal conversion. However, in direct coal liquefaction, a “hydrogen-rich” environment is a distinctive fe [Detail] ...
Radicals are important intermediates in direct coal liquefaction. Certain radicals can cause the cleavage of chemical bonds. At high temperatures, radical fragments can be produced by the splitting of large organic molecules, which can break strong chemical bonds through the induction pyrolysis of radicals. The reaction between the formation and annihilation of coal radical fragments and the effect of hydrogen-donor solvents on the radical fragments are discussed in lignite hydrogenolysis. Using the hydroxyl and ether bonds as indicators, the effects of different radicals on the cleavage of chemical bond were investigated employing density functional theory calculations and lignite hydrogenolysis experiments. Results showed that the adjustment of the coal radical fragments could be made by the addition of hydrogen-donor solvents. Results showed that the transition from coal radical fragment to H radical leads to the variation of product distribution. The synergistic mechanism of hydrogen supply and hydrogenolysis of hydrogen-donor solvent was proposed.
The chain length and hydrocarbon type significantly affect the production of light olefins during the catalytic pyrolysis of naphtha. Herein, for a better catalyst design and operation parameters optimization, the reaction pathways and equilibrium yields for the catalytic pyrolysis of C5–8 n/iso/cyclo-paraffins were analyzed thermodynamically. The results revealed that the thermodynamically favorable reaction pathways for n/iso-paraffins and cyclo-paraffins were the protolytic and hydrogen transfer cracking pathways, respectively. However, the formation of light paraffin severely limits the maximum selectivity toward light olefins. The dehydrogenation cracking pathway of n/iso-paraffins and the protolytic cracking pathway of cyclo-paraffins demonstrated significantly improved selectivity for light olefins. The results are thus useful as a direction for future catalyst improvements, facilitating superior reaction pathways to enhance light olefins. In addition, the equilibrium yield of light olefins increased with increasing the chain length, and the introduction of cyclo-paraffin inhibits the formation of light olefins. High temperatures and low pressures favor the formation of ethylene, and moderate temperatures and low pressures favor the formation of propylene. n-Hexane and cyclohexane mixtures gave maximum ethylene and propylene yield of approximately 49.90% and 55.77%, respectively. This work provides theoretical guidance for the development of superior catalysts and the selection of proper operation parameters for the catalytic pyrolysis of C5–8 n/iso/cyclo-paraffins from a thermodynamic point of view.
China is the largest producer and consumer of HFC-134a (1,1,1,2-tetrafluoroethane) in the world. Coal-based route is mainly adopted to produce HFC-134a, which suffers from large waste and CO2 emissions. Natural gas is a low-carbon and clean energy resource, and no research has been found on the environment and economy of producing HFC-134a from natural gas. In this study, CML 2001 method was used to carry out the life cycle assessment of natural gas (partial oxidation)-based and natural gas (plasma cracking)-based routes (abbreviated as gas(O)-based and gas(P)-based routes, respectively), and their environmental performances were compared with coal-based and oil-based routes. Meanwhile, considering that China is vigorously promoting the transformation of energy structure, and the application of electric heating equipment to replace fossil-based heating equipment in industrial field, which has a great impact on the environmental performance of the production processes, the authors conducted a scenario analysis. The results showed that the gas(O)-based route had the most favourable environmental benefits. However, the gas(P)-based route had the highest potential for reducing environmental burdens, and its environmental benefit was the most favourable in scenario 2050. Additionally, the economic performance of the gas(P)-based route was significantly better than that of gas(O)-based and coal-based routes.
Chemical looping reforming of methane is a novel and effective approach to convert methane to syngas, in which oxygen transfer is achieved by a redox material. Although lots of efforts have been made to develop high-performance redox materials, a few studies have focused on the redox kinetics. In this work, the kinetics of SrFeO3−δ–CaO∙MnO nanocomposite reduction by methane was investigated both on a thermo-gravimetric analyzer and in a packed-bed microreactor. During the methane reduction, combustion occurs before the partial oxidation and there exists a transition between them. The weight loss due to combustion increases, but the transition region becomes less inconspicuous as the reduction temperature increased. The weight loss associated with the partial oxidation is much larger than that with combustion. The rate of weight loss related to the partial oxidation is well fitted by the Avrami–Erofeyev equation with n = 3 (A3 model) with an activation energy of 59.8 kJ∙mol‒1. The rate law for the partial oxidation includes a solid conversion term whose expression is given by the A3 model and a methane pressure-dependent term represented by a power law. The partial oxidation is half order with respect to methane pressure. The proposed rate law could well predict the reduction kinetics; thus, it may be used to design and/or analyze a chemical looping reforming reactor.
A nitrogen-containing ionic liquid was synthesized using an aromatic nitrogen-containing heterocyclic and an amino acid, and applied to the extractive desulfurization process to remove benzothiophene, dibenzothiophene, and 4,6-dimethyldibenzothiphene from a model fuel oil. Chemical characterizations and simulation using Gaussian 09 software confirmed the rationality of an ionic liquid structure. Classification of non-covalent interactions between the ionic liquid and the three sulfur-containing contaminants was studied by reduced density gradient analysis. The viscosity of the ionic liquid was adjusted by addition of polyethylene glycol. Under extraction conditions of the volume of ionic liquid to oil as 1:1 and temperature as room temperature, the desulfurization selectivity of ionic liquid followed the order of 4,6-dimethyldibenzothiphene (15 min) < benzothiophene (15 min) ≈ dibenzothiophene (10 min). Addition of p-xylene and cyclohexene to the fuel oil had little effect. The extractant remained stable and effective after multiple regeneration cycles.
The standard enthalpy of formation is an important predictor of the reaction heat of a chemical reaction. In this work, a high-precision method was developed to calculate accurate standard enthalpies of formation for polycyclic aromatic hydrocarbons based on the general connectivity based hierarchy (CBH) with the discrete correction of atomization energy. Through a comparison with available experimental findings and other high-precision computational results, it was found that the present method can give a good description of enthalpy of formation for polycyclic aromatic hydrocarbons. Since CBH schemes can broaden the scope of application, this method can be used to investigate the energetic properties of larger polycyclic aromatic hydrocarbons to achieve a high-precision calculation at the CCSD(T)/CBS level. In addition, the energetic properties of CBH fragments can be accurately calculated and integrated into a database for future use, which will increase computational efficiency. We hope this work can give new insights into the energetic properties of larger systems.
Poly-γ-glutamic acid is an extracellular polymeric substance with various applications owing to its valuable properties of biodegradability, flocculating activity, water solubility, and nontoxicity. However, the ability of natural strains to produce poly-γ-glutamic acid is low. Atmospheric and room temperature plasma was applied in this study to conduct mutation breeding of Bacillus licheniformis CGMCC 2876, and a mutant strain M32 with an 11% increase in poly-γ-glutamic acid was obtained. Genome resequencing analysis identified 7 nonsynonymous mutations of ppsC encoding lipopeptide synthetase associated with poly-γ-glutamic acid metabolic pathways. From molecular docking, more binding sites and higher binding energy were speculated between the mutated plipastatin synthase subunit C and glutamate, which might contribute to the higher poly-γ-glutamic acid production. Moreover, the metabolic mechanism analysis revealed that the upregulated amino acids of M32 provided substrates for glutamate and promoted the conversion between L- and D-glutamate acids. In addition, the glycolytic pathway is enhanced, leading to a better capacity for using glucose. The maximum poly-γ-glutamic acid yield of 14.08 g·L–1 was finally reached with 30 g·L–1 glutamate.
Microbial electrosynthesis is a promising alternative to directly convert CO2 into long-chain compounds by coupling inorganic electrocatalysis with biosynthetic systems. However, problems arose that the conventional electrocatalysts for hydrogen evolution may produce extensive by-products of reactive oxygen species and cause severe metal leaching, both of which induce strong toxicity toward microorganisms. Moreover, poor stability of electrocatalysts cannot be qualified for long-term operation. These problems may result in poor biocompatibility between electrocatalysts and microorganisms. To solve the bottleneck problem, Co anchored on porphyrinic triazine-based frameworks was synthesized as the electrocatalyst for hydrogen evolution and further coupled with Cupriavidus necator H16. It showed high selectivity for a four-electron pathway of oxygen reduction reaction and low production of reactive oxygen species, owing to the synergistic effect of Co–Nx modulating the charge distribution and adsorption energy of intermediates. Additionally, low metal leaching and excellent stability were observed, which may be attributed to low content of Co and the stabilizing effect of metalloporphyrins. Hence, the electrocatalyst exhibited excellent biocompatibility. Finally, the microbial electrosynthesis system equipped with the electrocatalyst successfully converted CO2 to poly-β-hydroxybutyrate. This work drew up a novel strategy for enhancing the biocompatibility of electrocatalysts in microbial electrosynthesis system.
Unlocking of the extremely inert C=O bond during electrochemical CO2 reduction demands subtle regulation on a key “resource”, protons, necessary for intermediate conversion but also readily trapped in water splitting, which is still challenging for developing efficient single-atom catalysts limited by their structural simplicity usually incompetent to handle this task. Incorporation of extra functional units should be viable. Herein, a proton deployment strategy is demonstrated via “atomic and nanostructured iron (A/N-Fe) pairs”, comprising atomically dispersed iron active centers spin-polarized by nanostructured iron carbide ferromagnets, to boost the critical protonation steps. The as-designed catalyst displays a broad window (300 mV) for CO selectivity > 90% (98% maximum), even outperforming numerous cutting-edge M–N–C systems. The well-placed control of proton dynamics by A/N-Fe can promote *COOH/*CO formation and simultaneously suppress H2 evolution, benefiting from the magnetic-proximity-induced exchange splitting (spin polarization) that properly adjusts energy levels of the Fe sites’ d-shells, and further those of the adsorbed intermediates’ antibonding molecular orbitals.
Ultra-dispersed Ni nanoparticles (7.5 nm) on nitrogen-doped carbon nanoneedles (Ni@NCNs) were prepared by simple pyrolysis of Ni-based metal–organic-framework for selective hydrogenation of halogenated nitrobenzenes to corresponding anilines. Two different crystallization methods (stirring and static) were compared and the optimal pyrolysis temperature was explored. Ni@NCNs were systematically characterized by wide analytical techniques. In the hydrogenation of p-chloronitrobenzene, Ni@NCNs-600 (pyrolyzed at 600 °C) exhibited extraordinarily high performance with 77.9 h–1 catalytic productivity and > 99% p-chloroaniline selectivity at full p-chloronitrobenzene conversion under mild conditions (90 °C, 1.5 MPa H2), showing obvious superiority compared with reported Ni-based catalysts. Notably, the reaction smoothly proceeded at room temperature with full conversion and > 99% selectivity. Moreover, Ni@NCNs-600 afforded good tolerance to various nitroarenes substituted by sensitive groups (halogen, nitrile, keto, carboxylic, etc.), and could be easily recycled by magnetic separation and reused for 5 times without deactivation. The adsorption tests showed that the preferential adsorption of –NO2 on the catalyst can restrain the dehalogenation of p-chloronitrobenzene, thus achieving high p-chloroaniline selectivity. While the high activity can be attributed to high Ni dispersion, special morphology, and rich pore structure of the catalyst.
Recycling industrial solid waste not only saves resources but also eliminates environmental concerns of toxic threats. Herein, we proposed a new strategy for the utilization of petrochemical-derived carbon black waste, a waste vanadium-bearing resource (V > 30000 ppm (10 −6)). Chemical leaching was employed to extract metallic vanadium from the waste and the leachate containing V was used as an alternative raw material for the fabrication of vanadate nanomaterials. Through the screening of various metal cations, it was found that the contaminated Na+ during the leaching process showed strong competitive coordination with the vanadium ions. However, by adding foreign Ce3+ and Y3+ cations, two rare-earth vanadates, viz., flower-like CeVO4 and spherical YVO4 nanomaterials, were successfully synthesized. Characterization techniques such as scanning electron microscopy, transmission electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, Fourier-transform infrared, and N2 physisorption were applied to analyze the physicochemical properties of the waste-derived nanomaterials. Importantly, we found that rare-earth vanadate catalysts exhibited good activities toward the semi-hydrogenation of α,β-unsaturated aldehydes. The conversion of cinnamaldehyde and cinnamic alcohol selectivity were even higher than those of the common CeVO4 prepared using pure chemicals (67.2% vs. 27.7% and 88.4% vs. 53.5%). Our work provides a valuable new reference for preparing vanadate catalysts by the use of abundant vanadium-bearing waste resources.
The Ru/C catalyst prepared by impregnation method was used for hydrogenation of 3,5-dimethylpyridine in a trickle bed reactor. Under the same reduction conditions (300 °C in H2), the catalytic activity of the non-in-situ reduced Ru/C-n catalyst was higher than that of the in-situ reduced Ru/C-y catalyst. Therefore, an in-situ H2 reduction and moderate oxidation method was developed to increase the catalyst activity. Moreover, the influence of oxidation temperature on the developed method was investigated. The catalysts were characterized by Brunauer–Emmett–Teller method, hydrogen temperature programmed reduction H2-TPR, hydrogen temperature-programmed dispersion (H2-TPD), X-ray diffraction, energy dispersive spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, O2 chemisorption and oxygen temperature-programmed dispersion (O2-TPD) analyses. The results showed that there existed an optimal Ru/RuOx ratio for the catalyst, and the highest 3,5-dimethylpyridine conversion was obtained for the Ru/C-i1 catalyst prepared by in-situ H2 reduction and moderate oxidation (oxidized at 100 °C). Excessive oxidation (200 °C) resulted in a significant decrease in the Ru/RuOx ratio of the in-situ H2 reduction and moderate oxidized Ru/C-i2 catalyst, the interaction between RuOx species and the support changed, and the hard-to-reduce RuOx species was formed, leading to a significant decrease in catalyst activity. The developed in-situ H2 reduction and moderate oxidation method eliminated the step of the non-in-situ reduction of catalyst outside the trickle bed reactor.
The deacylation of amides, which is widely employed in the pharmaceutical industry, is not a fast reaction under normal conditions. To intensify this reaction, a high-temperature and high-pressure continuous microreaction technology was developed, whose space-time yield was 49.4 times that of traditional batch reactions. Using the deacylation of acetanilide as a model reaction, the effects of the temperature, pressure, reaction time, molar ratio of reactants, and water composition on acetanilide conversion were carefully studied. Based on the rapid heating and cooling capabilities, the kinetics of acetanilide deacylation at high temperatures were investigated to determine the orders of reactants and activation energy. This microreaction technology was further applied to a variety of other amides to understand the influence of substituents and steric hindrance on the deacylation reaction.
