RESEARCH ARTICLE

Dynamic characteristics of a magnetorheological pin joint for civil structures

  • Yancheng LI ,
  • Jianchun LI
Expand
  • Centre for Built Infrastructure Research, Faculty of Engineering and Information Technology, University of Technology Sydney, NSW 2007, Australia

Received date: 27 Oct 2013

Accepted date: 09 Dec 2013

Published date: 05 Mar 2014

Copyright

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg

Abstract

Magnetorheological (MR) pin joint is a novel device in which its joint moment resistance can be controlled in real-time by altering the applied magnetic field. The smart pin joint is intended to be used as a controllable connector between the columns and beams of a civil structure to instantaneously shift the structural natural frequencies in order to avoid resonance and therefore to reduce unwanted vibrations and hence prevent structural damage. As an intrinsically nonlinear device, modelling of this MR fluid based device is a challenging task and makes the design of a suitable control algorithm a cumbersome situation. Aimed at its application in civil structure, the main purpose of this paper is to test and characterise the hysteretic behaviour of MR pin joint. A test scheme is designed to obtain the dynamic performance of MR pin joint in the dominant earthquake frequency range. Some unique phenomena different from those of MR damper are observed through the experimental testing. A computationally-efficient model is proposed by introducing a hyperbolic element to accurately reproduce its dynamic behaviour and to further facilitate the design of a suitable control algorithm. Comprehensive investigations on the model accuracy and dependences of the proposed model on loading condition (frequency and amplitude) and input current level are reported in the last section of this paper.

Cite this article

Yancheng LI , Jianchun LI . Dynamic characteristics of a magnetorheological pin joint for civil structures[J]. Frontiers of Mechanical Engineering, 2014 , 9(1) : 15 -33 . DOI: 10.1007/s11465-014-0283-0

1
SoongT T. Active structural Control: Theory and Practice, Longman Scientific and Technical, Essex, England, 1990

2
FujinoY, SoongT T, SpencerB F. Structural Control: Basic Concepts and Applications, Proc. ASCE Structures Congress XIV, Chicago, Illinois, 1996, 1277–1278

3
JollyM R, BenderJ W, CarlsonJ D. Properties and applications of commercial magnetorheological fluids. In: Proceedings of the SPIE 5th International Symposium on Smart Structures and Materials, San Diego, CA, USA, 1998, 262–275

4
CarlsonJ D, CatanzariteD M, ClairK A S. Commercial magnetorheological fluid devices. International Journal of Modern Physics B, 1996, 10(23/24): 2857–2865

DOI

5
FeltD W, HagenbuchleM, LiuJ, RichardJ. Rheology of a magnetorheological Fluid. Journal of Intelligent Material Systems and Structures, 1996, 7(5): 589–593

DOI

6
HousnerG W, BergmanL A, CaugheyT K, ChassiakosA G, ClausR O, MasriS F, SkeltonR E, SoongT T, SpencerB F, YaoJ T P. Structural Control: Past, Present, and Future. Journal of Engineering Mechanics, 1997, 123(9): 897–971

DOI

7
XuY L, QuW L, KoJ M. Seismic response control of frame structures using magnetorheological/ electrorheological dampers. Earthquake Engineering & Structural Dynamics, 2000, 29(5): 557–575

DOI

8
DykeS J. Acceleration feedback control strategies for active and semi-active control systems: modelling, algorithm, development and experimental verification. PhD Dissertation, Department of Civil Engineering and Geological Sciences, University of NotreDame, Indiana, USA, <month>July</month>1996

9
WangJ, LiY. Dynamic Simulation and Test Verification of MR Shock Absorber under Impact Load. Journal of Intelligent Material Systems and Structures, 2006, 17(4): 309–314

DOI

10
DykeS J, SpencerB F Jr, SainM K, CarlsonJ D. Modeling and control of magnetorheological dampers for seismic response reduction. Smart Materials and Structures, 1996, 5(5): 565–575

DOI

11
YangG, SpencerB F Jr, JungH H, CarlsonJ D. Dynamic modelling of large-scale magnetorheological damper system for civil engineering application. Journal of Engineering Mechanics, 2004, 130(9): 1107–1114

DOI

12
DongL, YingZ G, ZhuW Q. Stochastic Optimal Semi-Active Control of Nonlinear Systems by Using MR Dampers. Advances in Structural Engineering, 2004, 7(6): 485–494

DOI

13
BaoY, HuangC, ZhouD, ZhaoY J. Semi-Active Direct Velocity Control Method of Dynamic Response of Spatial Reticulated Structures Based on MR Dampers. Advances in Structural Engineering, 2009, 12(4): 547–558

DOI

14
PanG, MatsuhisaH, HondaY. Analytical model of a magnetorheological damper and its application to vibration control, IEEE 26th Annual Conference of Industrial Electronics Society, Nagoya, Japan, <day>22nd -28th</day><month>Oct</month>, 2000, Vol. 3, pp. 1850–1855

15
StanwayR, SprostonJ L, StevensN G. Non-linear modelling of an electro-rheological vibration damper. Journal of Electrostatics, 1987, 20(2): 167–184

DOI

16
MasriS F, KumarR, EhrgottR C. Modeling and control of an electrorheological device for structural control applications. Smart Materials and Structures, 1995, 4(1A): A121–A131

DOI

17
WereleyN M, PangL, KamathG M. Idealized hysteresis modelling of electrorheological and magnetorheological dampers. Journal of Intelligent Material Systems and Structures, 1998, 9(8): 642–649

DOI

18
KamathG M, WereleyN M. A nonlinear viscoelastic-plastic model for electrorheological fluids. Smart Materials and Structures, 1997, 6(3): 351–359

DOI

19
SpencerB F, DykeS J, SainM K, CarlsonJ D. Phenomenological model of a magnetorheological damper. Journal of Engineering Mechanics, 1997, 123(3): 230–238

DOI

20
EhrgottR C, MasriS F. Modeling of the oscillatory dynamic behaviour of electrorheological materials in shear. Smart Materials and Structures, 1992, 1(4): 275–285

DOI

21
GamotaD R, FiliskoF E. Dynamic mechanical studies of electrorheological materials: moderate frequencies. Journal of Rheology, 1991, 35(3): 399–425

DOI

22
GamotaD R, FiliskoF E. High frequency dynamic mechanical study of an aluminosilicate electrorheological material. Journal of Rheology, 1991, 35(7): 1411–1425

DOI

23
McLeishT C B, JordanT, ShawM T. Viscoelastic response electrorheological fluids. I. Frequency dependence. Journal of Rheology, 1991, 35(3): 427–448

DOI

24
JordanT., ShawM. T. and McLeishT. C. B.. Viscoelastic response electrorheological fluids. II. Field strength and strain dependence. Journal of Rheology, 36(3), 441–463

25
GandhiF, BulloughW A. On the Phenomenological Modeling of Electrorheological and Magnetorheological Fluid PreyieldBehavior. Journal of Intelligent Material Systems and Structures, 2005, 16(3): 237–248

DOI

26
LiW H, DuH J, ChenG, YeoS H, GuoN Q. Nonlinear viscoelastic properties of MR fluids under large-amplitude-oscillatory-shear. Rheologica Acta, 2003, 42(3): 280–286

27
WangE R, MaX Q, RakhelaS, SuC Y. Modelling the hysteretic characteristics of a magnetorheological fluid damper. Proceedings of the Institution of Mechanical Engineers. Part D, Journal of Automobile Engineering, 2003, 217(7): 537–550

DOI

28
DominguezA, SedaghatiR, StiharuI. A new dynamic hysteresis model for magnetorheological dampers. Smart Materials and Structures, 2006, 15(5): 1179–1189

DOI

29
AliS. F. and RamaswamyA.. Testing and modelling of MR damper and its application to SDOF systems using integral backstepping technique. Journal of Dynamic Systems, Measurement, and Control, 131(2), 2009, 021009.1–11

30
WidjajaJ, SamaliB, LiJ. The Use of Displacement Threshold for Switching Frequency Strategy for Structural Vibration Mitigation. Journal of Mechanical Science and Technology, 2007, 21(6): 865–869

DOI

31
WidjajaJ, SamaliB, LiJ, DackermannU, BrownP. Amplitude frequency characteristics of smart pin-frame system”. Proceedings of the 11th Asia-Pacific Vibration Conference, Malaysia: Institute of Noise& Vibration, University of TechnologyMalaysia, 23-25 November, Langkawi, 228–233.

32
LiY, LiJ, SamaliB, WangJ. Theoretical and Experimental Studies on Semi-Active Smart Pin Joint. Proceeding of 20th Australasian Conference on the Mechanics of Structures and Materials, Toowoomba, Queensland, Australia, <day>2-5</day><month>December</month>2008, 723–728

33
LiY, LiJ, SamaliB, WangJ. Design Considerations and Experimental Studies on Semi-Active Smart Pin Joint. Frontiers of Mechanical Engineering in China, 2009, 4(4): 363–370

DOI

34
LiY, LiJ, SamaliB. Design of New Generation Magnetorheological Pins, 21st Australasian Conference on the Mechanics of Structures and Materials, Victoria University (VU), Melbourne, Australia, <day>7-10</day><month>December</month>, 2010, 807–812

35
LiY, LiJ, SamaliB. Dynamic Performance of A Novel Magnetorheological Pin Joint. Journal of System Design and Dynamics, 2011, 5(5): 706–715

DOI

36
KamathG M, WereleyN M. Nonlinear viscoelastic-plastic mechanism-based model of an electrorheological damper. Journal of Guidance, Control, and Dynamics, 1997, 20(6): 1125–1132

DOI

37
KwokN M, HaQ P, NguyenT H, LiJ, SamaliB. A novel hysteretic model for magnetorheological fluid dampers and parameter identification using particle swarm optimization. Sensors and Actuators. A, Physical, 2006, 132(2): 441–451

DOI

38
JimenezR, Alvarez-IcazaL. LuGre friction model for a magnetorheological damper. Structural Control and Health Monitoring, 2005, 12: 91–116

DOI

39
YangF, SedaghatiR, EsmailzadehE. Development of LuGrefriction model for large-scale magnetorheological fluid dampers. Journal of Intelligent Material Systems and Structures, 2009, 20(8): 923–937

DOI

Outlines

/