Frontiers of Mechanical Engineering >

2009 , Vol. 4 >Issue 2: 215 - 218

DOI: https://doi.org/10.1007/s11465-009-0026-9

RESEARCH ARTICLE

Temperature control of transfer roller’s bearing based on finite element analysis

  • Peng ZHANG ,
  • Yourong LI ,
  • Han XIAO
Expand
  • Mechanical automation college of Wuhan University of Science and Technology, Wuhan 430081, China

Received date: 10 Jul 2008

Accepted date: 05 Sep 2008

Published date: 05 Jun 2009

Copyright

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg
Fold

Abstract

After a heat preservation cover is installed on the main rolling line, the heat dissipation environment of the transfer roller working on the heat preservation cover is changed. To ensure the normal production, a reasonable working jet capacity of the roller neck is derived. First, a globe model of the transfer roller is built for finite element analysis. Second, the sub-model of the fixed end bearing is built and the boundary condition of the sub-model is supplied by the results of the globe model. The analysis result of the sub-model shows that the temperature of the transfer roller bearing exceeds 85°C a rolling periodicity later. With finite element analysis, the heat flux is obtained and the minimum working jet capacity is derived.

Key words： transfer roller bearing; finite element analysis; sub-model; temperature control

Cite this article

Peng ZHANG , Yourong LI , Han XIAO . Temperature control of transfer roller’s bearing based on finite element analysis[J]. Frontiers of Mechanical Engineering, 2009 , 4(2) : 215 -218 . DOI: 10.1007/s11465-009-0026-9

References

Publishing order | Descend order by publishing year | Descend order by cited within
1
Wang Xiaoping, Zhang Jiongming. Study on the secondary cooling water for slab continuous casting. Shanxi Metallurgy, 2006, 1: 25-26(in Chinese)

2
Shen Yishen,Li Baowei,Wu Maolin. Basic Principle of Metallurgy Transfers. Beijing: Metallurgical Industry Press, 2000(in Chinese)

Options
Outlines

/

〈 〉