Temperature control of transfer roller’s bearing based on finite element analysis

Abstract

After a heat preservation cover is installed on the main rolling line, the heat dissipation environment of the transfer roller working on the heat preservation cover is changed. To ensure the normal production, a reasonable working jet capacity of the roller neck is derived. First, a globe model of the transfer roller is built for finite element analysis. Second, the sub-model of the fixed end bearing is built and the boundary condition of the sub-model is supplied by the results of the globe model. The analysis result of the sub-model shows that the temperature of the transfer roller bearing exceeds 85°C a rolling periodicity later. With finite element analysis, the heat flux is obtained and the minimum working jet capacity is derived.

Keywords

transfer roller bearing / finite element analysis / sub-model / temperature control

References

[1] Wang Xiaoping, Zhang Jiongming. Study on the secondary cooling water for slab continuous casting. Shanxi Metallurgy, 2006, 1: 25-26(in Chinese)

[2] Shen Yishen,Li Baowei,Wu Maolin. Basic Principle of Metallurgy Transfers. Beijing: Metallurgical Industry Press, 2000(in Chinese)

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg