RESEARCH ARTICLE

Micro-hydromechanical deep drawing of metal cups with hydraulic pressure effects

  • Liang LUO 1 ,
  • Zhengyi JIANG , 1,3 ,
  • Dongbin WEI 2 ,
  • Xiaogang WANG 3 ,
  • Cunlong ZHOU 3 ,
  • Qingxue HUANG 3
Expand
  • 1. School of Mechanical, Materials, Mechatronic, and Biomedical Engineering, University of Wollongong, Wollongong, NSW 2522, Australia
  • 2. School of Electrical, Mechanical, and Mechatronic System, University of Technology, Sydney, NSW 2007, Australia
  • 3. School of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China

Received date: 05 Apr 2017

Accepted date: 19 May 2017

Published date: 23 Jan 2018

Copyright

2018 Higher Education Press and Springer-Verlag GmbH Germany

Abstract

Micro-metal products have recently enjoyed high demand. In addition, metal microforming has drawn increasing attention due to its net-forming capability, batch manufacturing potential, high product quality, and relatively low equipment cost. Micro-hydromechanical deep drawing (MHDD), a typical microforming method, has been developed to take advantage of hydraulic force. With reduced dimensions, the hydraulic pressure development changes; accordingly, the lubrication condition changes from the macroscale to the microscale. A Voronoi-based finite element model is proposed in this paper to consider the change in lubrication in MHDD according to open and closed lubricant pocket theory. Simulation results agree with experimental results concerning drawing force. Changes in friction significantly affect the drawing process and the drawn cups. Moreover, defined wrinkle indexes have been shown to have a complex relationship with hydraulic pressure. High hydraulic pressure can increase the maximum drawing ratio (drawn cup height), whereas the surface finish represented by the wear is not linearly dependent on the hydraulic pressure due to the wrinkles.

Cite this article

Liang LUO , Zhengyi JIANG , Dongbin WEI , Xiaogang WANG , Cunlong ZHOU , Qingxue HUANG . Micro-hydromechanical deep drawing of metal cups with hydraulic pressure effects[J]. Frontiers of Mechanical Engineering, 2018 , 13(1) : 66 -73 . DOI: 10.1007/s11465-018-0468-z

Acknowledgements

The first author is grateful for the financial support given by the Chinese Scholarship Council (CSC 201206160011) and for the international postgraduate tuition award offered by the University of Wollongong. The authors would also like to thank the Australian Research Council for their financial support. This study was also supported by the invitation fellowship program of the Japan Society for the Promotion of Science (Z. Y. Jiang).
1
Goel P. MEMS non-silicon fabrication technologies. Sensors and Transducers, 2012, 139(4): 1–23

DOI

2
Huff M. MEMS fabrication. Sensor Review, 2002, 22(1): 18–33

DOI

3
Geiger M, Kleiner  M, Eckstein R, . Microforming. CIRP Annals-Manufacturing Technology, 2001, 50(2): 445–462 

DOI

4
Tiesler N, Engel  U. Microforming—Effects of miniaturization. In: Proceedings of the 8th International Conference on Metal Forming. Rotterdam: A. A. Balkema, 2000, 355–360

5
Vollertsen F, Hu  Z, Niehoff H S, . State of the art in micro forming and investigations into micro deep drawing. Journal of Materials Processing Technology, 2004, 151(1–3): 70–79 d

DOI

6
Deng J H, Fu  M W, Chan  W L. Size effect on material surface deformation behavior in micro-forming process. Materials Science and Engineering: A, 2011, 528(13–14): 4799–4806

DOI

7
Molotnikov A, Lapovok  R, Gu C F, . Size effects in micro cup drawing. Materials Science and Engineering: A, 2012, 550: 312–319 

DOI

8
Vollertsen F. Size effects in micro forming. Key Engineering Materials, 2011, 473: 3–12

9
Sato H, Manabe  K, Furushima T, . On the scale dependence of micro hydromechanical deep drawing. Key Engineering Materials, 2017, 725: 689–694

10
Wang C, Guo  B, Shan D, . Tribological behaviors in microforming considering microscopically trapped lubricant at contact interface. International Journal of Advanced Manufacturing Technology, 2014, 71(9–12): 2083–2090 

DOI

11
Sato H, Manabe  K, Wei D, . Tribological behavior in micro-sheet hydroforming. Tribology International, 2016, 97: 302–312

DOI

12
Wang X, Cao  J. On the prediction of side-wall wrinkling in sheet metal forming processes. International Journal of Mechanical Sciences, 2000, 42(12): 2369–2394 

DOI

13
Wang X, Cao  J. An analytical prediction of flange wrinkling in sheet metal forming. Journal of Manufacturing Processes, 2000, 2(2): 100–107 

DOI

Outlines

/