Frontiers of Mechanical Engineering >
Boundary conditions for axisymmetric piezoelectric cylinder
Received date: 05 Mar 2013
Accepted date: 02 Jun 2013
Published date: 05 Dec 2013
Copyright
For axisymmetric piezoelectric cylinder, the reciprocal theorem and the axisymmetric general solution of piezoelasticity are applied in a novel way to obtain the appropriate stress and mixed boundary conditions accurate to all orders for the cylinder of general edge geometry and loadings. A decay analysis technique developed by Gregory and Wan is converted into necessary conditions on the end-data of axisymmetric piezoelectric circular cylinder, and the rapidly decaying solution is established. The prescribed end-data of the circle cylinder must satisfy these conditions in order that they could generate a decaying state within the cylinder. When stress and mixed conditions are imposed on the end of cylinder, these decaying state conditions for the case of axisymmetric deformation of piezoelectric cylinder are derived explicitly. They are then used for the correct formulation of boundary conditions for the theory solution (or the interior solution) of axisymmetric piezoelectric cylinder. The results of the present paper enable us to establish a set of correct boundary conditions, most of which are obtained for the first time.
Baosheng ZHAO , Di WU , Xi CHEN . Boundary conditions for axisymmetric piezoelectric cylinder[J]. Frontiers of Mechanical Engineering, 2013 , 8(4) : 401 -408 . DOI: 10.1007/s11465-013-0272-8
1 |
Wang Z K, Zheng B L. The general solution of three-dimensional problems in piezoelectric media. International Journal of Solids and Structures, 1995, 32(1): 105–115
|
2 |
Xu S P, Wang W. On the general solution of anisotropic piezoelectricity. Acta Scientiarum Naturalium Universitatis Pekinensis , 2006, 42(3): 302–304
|
3 |
Xu S P, Gao Y, Wang W. Completeness of general solutions for three-dimensional transversely isotropic piezoelectricity. International Journal of Solids and Structures, 2008, 45(18–19): 5118–5126
|
4 |
Gregory R D, Wan F Y M. Decaying states of plane strain in a semi-infinite strip and boundary conditions for plate theory. Journal of Elasticity, 1984, 14(1): 27–64
|
5 |
Gregory R D, Wan F Y M. On plate theories and Saint-Venant’s principle. International Journal of Solids and Structures, 1985, 21(10): 1005–1024
|
6 |
Wan F Y M. Stress boundary conditions for plate bending. International Journal of Solids and Structures, 2003, 40(16): 4107–4123
|
7 |
Gao Y, Xu S P, Zhao B S. Boundary conditions for elastic beam bending. Comptes Rendus Mécanique, 2007, 335(1): 1–6
|
8 |
Gao Y. Decay conditions for 1D quasicrystal beams. IMA Journal of Applied Mathematics, 2011, 76(4): 599–609
|
9 |
Zhao B S, Gao Y, Zhao Y T, Zhou X X. Boundary conditions for an axisymmetric circular cylinder. Comptes Rendus Mécanique, 2010, 338(5): 255–259
|
10 |
Gao Y, Xu S P, Zhao B S. Mixed boundary conditions for piezoelectric plates. Science in China Series G: Physics, Mechanics and Astronomy, 2009, 52(5): 755–761
|
/
〈 | 〉 |