Frontiers of Mechanical Engineering >

2010 , Vol. 5 >Issue 2: 176 - 183

DOI: https://doi.org/10.1007/s11465-010-0001-5

Research articles

Signal separation technology for diphase opposition giant magnetostrictive self-sensing actuator

Expand
  • 1.College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China; 2.College of Mechanical and Electrical Engineering, China University of Petroleum, Beijing 102249, China;

Published date: 05 Jun 2010

Fold

Abstract

The structure and principle of a new type of a diphase opposition giant magnetostrictive self-sensing actuator is introduced. A bridge analysis model based on variable inductance is established. Dynamic balance separation technology for the giant magnetostrictive self-sensing actuator comes true by the least means square (LMS) self-adapting algorithm. The scheme design of one important part of the circuit with the real-time separation circuit of the dynamic balance signal based on a digital signal processor is obtained. The part of the signal separated circuit is designed, which includes logarithmic-antilog practical multiplication circuit, amplifying circuit, filter circuits, and amplifier circuit. Based on the embedded system simulation software—PROTUES, the simulation effect of the circuit that separates the sensing signal from the mixed signals is obvious, which indicates that the circuit can rapidly and stably work. Moreover, the structure is simple, reliable, and meets the practical requirement.

Key words： giant magnetostrictive material (GMM) self-sensing actuator; least means square (LMS) self-adapting algorithm; design of self-adaptive circuit

Cite this article

Xinhua WANG, Shuwen SUN, Jian ZHEN, Qianyi YA, Deguo WANG, . Signal separation technology for diphase opposition giant magnetostrictive self-sensing actuator[J]. Frontiers of Mechanical Engineering, 2010 , 5(2) : 176 -183 . DOI: 10.1007/s11465-010-0001-5

Options
Outlines

/

〈 〉