Imbalanced fault diagnosis of rotating machinery using autoencoder-based SuperGraph feature learning

Abstract

Existing fault diagnosis methods usually assume that there are balanced training data for every machine health state. However, the collection of fault signals is very difficult and expensive, resulting in the problem of imbalanced training dataset. It will degrade the performance of fault diagnosis methods significantly. To address this problem, an imbalanced fault diagnosis of rotating machinery using autoencoder-based SuperGraph feature learning is proposed in this paper. Unsupervised autoencoder is firstly used to compress every monitoring signal into a low-dimensional vector as the node attribute in the SuperGraph. And the edge connections in the graph depend on the relationship between signals. On the basis, graph convolution is performed on the constructed SuperGraph to achieve imbalanced training dataset fault diagnosis for rotating machinery. Comprehensive experiments are conducted on a benchmarking publicized dataset and a practical experimental platform, and the results show that the proposed method can effectively achieve rotating machinery fault diagnosis towards imbalanced training dataset through graph feature learning.

Graphical abstract

Keywords

imbalanced fault diagnosis / graph feature learning / rotating machinery / autoencoder

References

[1] Shao H, Jiang H, Wang F. An enhancement deep feature fusion method for rotating machinery fault diagnosis. Knowledge-Based Systems, 2017, 119 : 200– 220

[2] Han T, Liu C, Wu L. An adaptive spatiotemporal feature learning approach for fault diagnosis in complex systems. Mechanical Systems and Signal Processing, 2019, 117 : 170– 187

[3] Lei Y, Jia F, Lin J. An intelligent fault diagnosis method using unsupervised feature learning towards mechanical Big Data. IEEE Transactions on Industrial Electronics, 2016, 63( 5): 3137– 3147

[4] Chen Z, Mauricio A, Li W. A deep learning method for bearing fault diagnosis based on cyclic spectral coherence and convolutional neural networks. Mechanical Systems and Signal Processing, 2020, 140 : 106683–

[5] Han T, Li Y, Qian M. A hybrid generalization network for intelligent fault diagnosis of rotating machinery under unseen working conditions. IEEE Transactions on Instrumentation and Measurement, 2021, 70 : 1– 11

[6] Guo X, Chen L, Shen C. Hierarchical adaptive deep convolution neural network and its application to bearing fault diagnosis. Measurement, 2016, 93 : 490– 502

[7] Ren H, Liu W, Shan M. A new wind turbine health condition monitoring method based on VMD-MPE and feature-based transfer learning. Measurement, 2019, 148 : 106906–

[8] Razavi-Far R, Hallaji E, Farajzadeh-Zanjani M. A semi-supervised diagnostic framework based on the surface estimation of faulty distributions. IEEE Transactions on Industrial Informatics, 2019, 15( 3): 1277– 1286

[9] Chen F, Tang B, Chen R. A novel fault diagnosis model for gearbox based on wavelet support vector machine with immune genetic algorithm. Measurement, 2013, 46( 1): 220– 232

[10] Chen Z, Mauricio A, Li W. A deep learning method for bearing fault diagnosis based on Cyclic Spectral Coherence and Convolutional Neural Networks. Mechanical Systems and Signal Processing, 2020, 140 : 106683–

[11] Mao W, He L, Yan Y. Online sequential prediction of bearings imbalanced fault diagnosis by extreme learning machine. Mechanical Systems and Signal Processing, 2017, 83 : 450– 473

[12] Dai X, Gao Z. From model, signal to knowledge: a data-driven perspective of fault detection and diagnosis. IEEE Transactions on Industrial Informatics, 2013, 9( 4): 2226– 2238

[13] Zhang Y, Li X, Gao L. Imbalanced data fault diagnosis of rotating machinery using synthetic oversampling and feature learning. Journal of Manufacturing Systems, 2018, 48 : 34– 50

[14] Barandela R, Valdovinos R M, Sánchez J S, et al. The imbalanced training sample problem: Under or over sampling? In: Fred A, Caelli T M, Duin R P W, et al., eds. Structural, Syntactic, and Statistical Pattern Recognition. Berlin: Springer, 2004, 806–814

[15] Guo L, Lei Y, Xing S. Deep convolutional transfer learning network: a new method for intelligent fault diagnosis of machines with unlabeled data. IEEE Transactions on Industrial Electronics, 2019, 66( 9): 7316– 7325

[16] Yang B, Lei Y, Jia F. An intelligent fault diagnosis approach based on transfer learning from laboratory bearings to locomotive bearings. Mechanical Systems and Signal Processing, 2019, 122 : 692– 706

[17] Li X, Zhang W, Ding Q. A robust intelligent fault diagnosis method for rolling element bearings based on deep distance metric learning. Neurocomputing, 2018, 310 : 77– 95

[18] Mariani G, Scheidegger F, Istrate R, et al. BAGAN: Data Augmentation with Balancing GAN. 2018, arXiv:1803.09655

[19] Zhang W, Li X, Jia X. Machinery fault diagnosis with imbalanced data using deep generative adversarial networks. Measurement, 2020, 152 : 107377–

[20] Gao X, Deng F, Yue X. Data augmentation in fault diagnosis based on the Wasserstein generative adversarial network with gradient penalty. Neurocomputing, 2020, 396 : 487– 494

[21] Zhao X, Jia M, Lin M. Deep Laplacian auto-encoder and its application into imbalanced fault diagnosis of rotating machinery. Measurement, 2020, 152 : 107320–

[22] Jia F, Lei Y, Lu N. Deep normalized convolutional neural network for imbalanced fault classification of machinery and its understanding via visualization. Mechanical Systems and Signal Processing, 2018, 110 : 349– 367

[23] Wang T, Liu Z, Lu G. Temporal-spatio graph based spectrum analysis for bearing fault detection and diagnosis. IEEE Transactions on Industrial Electronics, 2021, 68( 3): 2598– 2607

[24] Lo C H, Wong Y K, Rad A B. Fusion of qualitative bond graph and genetic algorithms: a fault diagnosis application. ISA Transactions, 2002, 41( 4): 445– 456

[25] Wang T, Lu G, Yan P. A novel statistical time-frequency analysis for rotating machine condition monitoring. IEEE Transactions on Industrial Electronics, 2020, 67( 1): 531– 541

[26] Gao Y, Yu D. Total variation on horizontal visibility graph and its application to rolling bearing fault diagnosis. Mechanism and Machine Theory, 2020, 147 : 103768–

[27] Yang C, Zhou K, Liu J. SuperGraph: Spatial-temporal graph-based feature extraction for rotating machinery diagnosis. IEEE Transactions on Industrial Electronics, 2021 (in press)

[28] Zhang D, Stewart E, Entezami M. Intelligent acoustic-based fault diagnosis of roller bearings using a deep graph convolutional network. Measurement, 2020, 156 : 107585–

[29] Wang S, Xing S, Lei Y. Vibration indicator-based graph convolutional network for semi-supervised bearing fault diagnosis. IOP Conference Series. Materials Science and Engineering, 2021, 1043( 5): 052026–

[30] Wang Y, Gao L, Gao Y. A new graph-based semi-supervised method for surface defect classification. Robotics and Computer-Integrated Manufacturing, 2021, 68 : 102083–

[31] Liu J, Hu Y, Wang Y. An integrated multi-sensor fusion-based deep feature learning approach for rotating machinery diagnosis. Measurement Science & Technology, 2018, 29( 5): 055103–

[32] Tran V T, Althobiani F, Ball A. An approach to fault diagnosis of reciprocating compressor valves using Teager–Kaiser energy operator and deep belief networks. Expert Systems with Applications, 2014, 41( 9): 4113– 4122

[33] Bengio Y, Courville A, Vincent P. Representation learning: a review and new perspectives. IEEE Transactions on Pattern Analysis and Machine Intelligence, 2013, 35( 8): 1798– 1828

[34] Erhan D, Bengio Y, Courville A. Why does unsupervised pre-training help deep learning?. Journal of Machine Learning Research, 2010, 11 : 625– 660

[35] Shuman D I, Narang S K, Frossard P. The emerging field of signal processing on graphs: extending highdimensional data analysis to networks and other irregular domains. IEEE Signal Processing Magazine, 2013, 30( 3): 83– 98

[36] Song T, Zheng W, Song P. Eeg emotion recognition using dynamical graph convolutional neural networks. IEEE Transactions on Affective Computing, 2020, 11( 3): 532– 541

[37] Defferrard M, Bresson X, Vandergheynst P. Convolutional neural networks on graphs with fast localized spectral filtering. Advances in Neural Information Processing Systems, 2016, 29 : 3844– 3852

[38] Shao S, McAleer S, Yan R. Highly accurate machine fault diagnosis using deep transfer learning. IEEE Transactions on Industrial Informatics, 2019, 15( 4): 2446– 2455

[39] Shao H, Jiang H, Zhao H. A novel deep autoencoder feature learning method for rotating machinery fault diagnosis. Mechanical Systems and Signal Processing, 2017, 95 : 187– 204

[40] Li T, Zhao Z, Sun C, et al. Multi-receptive field graph convolutional networks for machine fault diagnosis. IEEE Transactions on Industrial Electronics, 2020 (in press)

RIGHTS & PERMISSIONS

Higher Education Press 2021.