Evaluation of power regeneration in primary suspension for a railway vehicle

Abstract

To improve the fuel economy of rail vehicles, this study presents the feasibility of using power regenerating dampers (PRDs) in the primary suspension systems of railway vehicles and evaluates the potential and recoverable power that can be obtained. PRDs are configured as hydraulic electromagnetic-based railway primary vertical dampers and evaluated in parallel and series modes (with and without a viscous damper). Hydraulic configuration converts the linear behavior of the track into a unidirectional rotation of the generator, and the electromagnetic configuration provides a controllable damping force to the primary suspension system. In several case studies, generic railway vehicle primary suspension systems that are configured to include a PRD in the two configuration modes are modeled using computer simulations. The simulations are performed on measured tracks with typical irregularities for a generic UK passenger route. The performance of the modified vehicle is evaluated with respect to key performance indicators, including regenerated power, ride comfort, and running safety. Results indicate that PRDs can simultaneously replace conventional primary vertical dampers, regenerate power, and exhibit desirable dynamic performance. A peak power efficiency of 79.87% is theoretically obtained in series mode on a top-quality German Intercity Express track (Track 270) at a vehicle speed of 160 mile/h (~257 km/h).

Keywords

railway vehicle / primary damper / power regeneration / ride comfort / running safety

References

[1] Yu F, Cao M, Zheng X. Research on the feasibility of vehicle active suspension with energy regeneration. Journal of Vibration and Shock, 2005, 24: 27–30 (in Chinese)

[2] Karnopp D. Power requirements for vehicle suspension systems. Vehicle System Dynamics, 1992, 21(1): 65–71

[3] Yu C, Wang W, Wang Q. Analysis of energy-saving potential of energy regenerative suspension system on hybrid vehicle. Journal of Jilin University (Engineering and Technology Edition), 2009, 39(4): 841–845 (in Chinese)

[4] Liang J, Shao C. Research on an energy-regenerative active suspension for vehicles. Vehicle & Power Technology, 2010, (1): 55–58 (in Chinese)

[5] Mossberg J, Anderson Z, Tucker C, Recovering Energy from Shock Absorber Motion on Heavy Duty Commercial Vehicles. SAE Technical Paper 2012-01-0814, 2012

[6] Matamoros-Sanchez A Z. The use of novel mechanical devices for enhancing the performance of railway vehicles. Dissertation for the Doctoral Degree. Loughborough: Loughborough University, 2013

[7] Zheng P, Wang R, Gao J, Parameter optimization of power regeneration on the hydraulic electric regenerative shock absorber system. Shock and Vibration, 2019, 2019: 5727849

[8] Zuo L, Zhang P S. Energy harvesting, ride comfort, and road handling of regenerative vehicle suspensions. Journal of Vibration and Acoustics, 2013, 135(1): 011002

[9] Zyga L. Energy-harvesting shock absorber that increases fuel efficiency wins R&D 100 award. Available at Science X website on July 14, 2011

[10] Zhang J, Peng Z, Zhang L, A review on energy-regenerative suspension systems for vehicles. In: Proceedings of the World Congress on Engineering. London, 2013, 1889–1892

[11] Zheng P, Wang R, Gao J. A comprehensive review on regenerative shock absorber systems. Journal of Vibration Engineering & Technologies, 2020, 8(1): 225–246

[12] Wendal G R, Stecklein G. A Regenerative Active Suspension System. SAE Technical Paper 910659, 1991

[13] Fodor M G, Redfield R C. The variable linear transmission for regenerative damping in vehicle suspension control. In: Proceedings of American Control Conference. Chicago: IEEE, 1992, 26–30

[14] Jolly M R, Margolis D L. Regenerative systems for vibration control. Journal of Vibration and Acoustics, 1997, 119(2): 208–215

[15] Aoyoma Y, Kawabate K, Hsegawa S, Development of the Full Active Suspension by Nissan. SAE Technical Paper 901747, 1990

[16] Norisugu T. Energy saving of a pneumatic system (2). Energy regenerative control of a pneumatic drive system. Hydraulics & Pneumatics, 1999, 38(4): 1–4

[17] Stansbury J. US Patent, 9270131. 2016-02-23

[18] Karnopp D. Permanent magnet linear motors used as variable mechanical dampers for vehicle suspensions. Vehicle System Dynamics, 1989, 18(4): 187–200

[19] Ryba D. Semi-active damping with an electromagnetic force generator. Vehicle System Dynamics, 1993, 22(2): 79–95

[20] Gupta A, Mulcahy T M, Hull J R. Electromagnetic shock absorbers. In: Proceedings of the 21st International Modal Analysis Conference. Kissimmee, 2003, 181

[21] Zuo L, Scully B, Shestani J, Design and characterization of an electromagnetic energy harvester for vehicle suspensions. Smart Materials and Structures, 2010, 19(4): 045003

[22] Okada Y, Yonemura J, Shibata M. Regenerative control of moving mass type vibration damper. In: Proceedings of the 4th International Conference on Motion and Vibration Control. Zurich, 1998, 85–90

[23] Suda Y, Nakadai S, Nakano K. Study on the self-powered active vibration control. In: Proceedings of the 4th International Conference on Motion and Vibration Control. Zurich, 1998

[24] Cao M, Liu W, Yu F. Development on electromotor actuator for active suspension of vehicle. Chinese Journal of Mechanical Engineering, 2008, 44(11): 224–228

[25] Zheng X, Yu F. Study on the potential benefits of an energy-regenerative active suspension for vehicles. SAE Transactions, 2005, 114: 242–245

[26] Li Z, Zuo L, Luhrs G, et al. Electromagnetic energy-harvesting shock absorbers: Design, modelling, and road tests. IEEE Transactions on Vehicular Technology, 2013, 62(3): 1065–1074

[27] Hayes R J, Beno J H, Weeks D A. Design and Testing of An Active Suspension System for a 2-1/2 Ton Military Truck. SAE Technical Papers 2005-01-1715. 2005

[28] Beno J H, Worthington M T, Mock J R. Suspension Trade Studies for Hybrid Electric Combat Vehicles. SAE Technical Paper 2005-01-0929, 2005

[29] Zhang Y, Zhang X, Zhan M, Study on a novel hydraulic pumping regenerative suspension for vehicles. Journal of the Franklin Institute, 2015, 352(2): 485–499

[30] Fang Z, Guo X, Xu L, Experimental study of damping and energy regeneration characteristics of a hydraulic electromagnetic shock absorber. Advances in Mechanical Engineering, 2013, 5: 943528

[31] Li C, Tse P W. Fabrication and testing of an energy-harvesting hydraulic damper. Smart Materials and Structures, 2013, 22(6): 065024

[32] Li C, Zhu R, Liang M, Integration of shock absorption and energy harvesting using a hydraulic rectifier. Journal of Sound and Vibration, 2014, 333(17): 3904–3916

[33] Wang R, Gu F, Cattley R, Modelling, testing and analysis of a regenerative hydraulic shock absorber system. Energies, 2016, 9(5): 386

[34] Sharma S K, Saini U, Kumar A. Semi-active control to reduce lateral vibration of passenger rail vehicle using disturbance rejection and continuous state damper controllers. Journal of Vibration Engineering & Technologies, 2019, 7(2): 117–129

[35] Sharma S K, Kumar A. Disturbance rejection and force-tracking controller of nonlinear lateral vibrations in passenger rail vehicle using magnetorheological fluid damper. Journal of Intelligent Material Systems and Structures, 2018, 29(2): 279–297

[36] Sharma S K, Kumar A. Ride comfort of a higher speed rail vehicle using a magnetorheological suspension system. Proceedings of the IMechE, 2018, 232(1): 32–48

[37] Sharma S K, Kumar A. Impact of longitudinal train dynamics on train operations: A simulation-based study. Journal of Vibration Engineering & Technologies, 2018, 6(3): 197–203

[38] Sharma S K, Kumar A. Impact of electric locomotive traction of the passenger vehicle Ride quality in longitudinal train dynamics in the context of Indian railways. Mechanics & Industry, 2017, 18(2): 222

[39] Sharma S K. Multibody analysis of longitudinal train dynamics on the passenger ride performance due to brake application. Proceedings of the IMechE, 2019, 233(2): 266–279

[40] World Health Organization. Global status report on road safety: Time for action. Available at World Health Organization website on June 25, 2009

[41] Serco. VTISM Version 2.6.6 User Guide, 2014

[42] VAMPIRE Dynamics. Vehicle Dynamics Version 6.5. Resonate. Available at VAMPIRE website on July 1, 2016

[43] Wang R. Modelling, testing and analysis of a regenerative hydraulic shock absorber system. Dissertation for the Doctoral Degree. Huddersfield: University of Huddersfield, 2016

[44] Wang R, Chen Z, Xu H, Modelling and validation of a regenerative shock absorber system. In: Proceedings of the 20th International Conference on Automation and Computing (ICAC’14). Cranfield: IEEE, 2014, 32–37

[45] Wang R, Crosbee D, Iwnicki S, Power regeneration in the primary suspension of a railway vehicle. In: Proceedings of the First International Conference on Rail Transportation. Chengdu, 2017

[46] Xu L, Guo X X, Liu J. Evaluation of energy-regenerative suspension structure based on fuzzy comprehensive judgment (FCJ). Advanced Materials Research, 2010, 139–141: 2636–2642

[47] BS EN 12299. Railway applications.  Ride comfort for passengers. Measurement and evaluation. 2009

[48] Nadal J. Theory of Locomotive Stability, Part II: Yaw Motion. Annals of Mines, 1896, 232–255

[49] RSSB. Railway Group Standard GM/RT2141: Resistance of railway vehicles to derailment and roll-over. 2009

RIGHTS & PERMISSIONS

Higher Education Press