Compressive behavior and energy absorption of polymeric lattice structures made by additive manufacturing

Abstract

Lattice structures have numerous outstanding characteristics, such as light weight, high strength, excellent shock resistance, and highly efficient heat dissipation. In this work, by combining experimental and numerical methods, we investigate the compressive behavior and energy absorption of lattices made through the stereolithography apparatus process. Four types of lattice structures are considered: (i) Uniform body-centered-cubic (U-BCC); (ii) graded body-centered-cubic (G-BCC); (iii) uniform body-centered-cubic with z-axis reinforcement (U-BCCz); and (iv) graded body-centered-cubic with z-axis reinforcement (G-BCCz). We conduct compressive tests on these four lattices and numerically simulate the compression process through the finite element method. Analysis results show that BCCz has higher modulus and strength than BCC. In addition, uniform lattices show better energy absorption capabilities at small compression distances, while graded lattices absorb more energy at large compression distances. The good correlation between the simulation results and the experimental phenomena demonstrates the validity and accuracy of the present investigation method.

Keywords

lattice structure / polymer / compressive behavior / additive manufacturing / simulation

References

[1] Gibson L J, Ashby M F. Cellular Solids: Structure and Properties. 2nd ed. Cambridge: Cambridge University Press, 1999

[2] Evans A G, Hutchinson J W, Fleck N A, . The topological design of multifunctional cellular metals. Progress in Materials Science, 2001, 46(3‒4): 309–327

[3] Xue Z, Hutchinson J W. A comparative study of impulse-resistant metal sandwich plates. International Journal of Impact Engineering, 2004, 30(10): 1283–1305

[4] Kim T, Hodson H P, Lu T J. Fluid-flow and endwall heat-transfer characteristics of an ultralight lattice-frame material. International Journal of Heat and Mass Transfer, 2004, 47(6‒7): 1129–1140 doi:10.1016/j.ijheatmasstransfer.2003.10.012

[5] Wang J, Lu T J, Woodhouse J, . Sound transmission through lightweight double-leaf partitions: Theoretical modelling. Journal of Sound and Vibration, 2005, 286(4‒5): 817–847

[6] Liu T, Deng Z C, Lu T J. Bi-functional optimization of actively cooled, pressurized hollow sandwich cylinders with prismatic cores. Journal of the Mechanics and Physics of Solids, 2007, 55(12): 2565–2602

[7] Wang Y, Xu H, Pasini D. Multiscale isogeometric topology optimization for lattice materials. Computational Methods in Applied Mathematics and Engineering, 2017, 316: 568–585

[8] Wang Y, Arabnejad S, Tanzer M, . Hip implant design with three-dimensional porous architecture of optimized graded density. Journal of Mechanical Design, 2018, 140(11): 111406 doi:10.1115/1.4041208

[9] Wu Z, Xia L, Wang S, . Topology optimization of hierarchical lattice structures with substructuring. Computational Methods in Applied Mathematics and Engineering, 2019, 345: 602–617

[10] Da D, Yvonnet J, Xia L, . Topology optimization of periodic lattice structures taking into account strain gradient. Computers & Structures, 2018, 210: 28–40 doi:10.1016/j.compstruc.2018.09.003

[11] Wang Z P, Poh L H, Dirrenberger J, . Isogeometric shape optimization of smoothed petal auxetic structures via computational periodic homogenization. Computational Methods in Applied Mathematics and Engineering, 2017, 323: 250–271

[12] Wang Z P, Poh L H, Zhu Y, . Systematic design of tetra-petals auxetic structures with stiffness constraint. Materials & Design, 2019, 170: 107669 doi:10.1016/j.matdes.2019.107669

[13] Helou M, Kara S. Design, analysis and manufacturing of lattice structures: An overview. International Journal of Computer Integrated Manufacturing, 2018, 31(3): 243–261

[14] Hou Y, Tie Y, Li C, . Low-velocity impact behaviors of repaired CFRP laminates: Effect of impact location and external patch configurations. Composites. Part B, Engineering, 2019, 163: 669–680

[15] Deshpande V S, Fleck N A, Ashby M F. Effective properties of the octet-truss lattice material. Journal of the Mechanics and Physics of Solids, 2001, 49(8): 1747–1769

[16] Rathbun H J, Wei Z, He M Y, . Measurement and simulation of the performance of a lightweight metallic sandwich structure with a tetrahedral truss core. Journal of Applied Mechanics, 2004, 71(3): 368–374

[17] Zok F W, Waltner S A, Wei Z, . A protocol for characterizing the structural performance of metallic sandwich panels: Application to pyramidal truss cores. International Journal of Solids and Structures, 2004, 41(22‒23): 6249–6271

[18] Wang J, Evans A G, Dharmasena K, . On the performance of truss panels with Kagome cores. International Journal of Solids and Structures, 2003, 40(25): 6981–6988

[19] Moongkhamklang P, Elzey D M, Wadley H N. Titanium matrix composite lattice structures. Composites. Part A: Applied Science and Manufacturing, 2008, 39(2): 176–187 doi:10.1016/j.compositesa.2007.11.007

[20] Luxner M H, Stampfl J, Pettermann H E. Finite element modeling concepts and linear analyses of 3D regular open cell structures. Journal of Materials Science, 2005, 40(22): 5859–5866

[21] Roberts A P, Garboczi E J. Elastic properties of model random three-dimensional open-cell solids. Journal of the Mechanics and Physics of Solids, 2002, 50(1): 33–55

[22] Brennan-Craddock J, Brackett D, Wildman R, . The design of impact absorbing structures for additive manufacture. Journal of Physics: Conference Series, 2012, 382(1): 012042

[23] Gümrük R, Mines R A. Compressive behavior of stainless steel micro-lattice structures. International Journal of Mechanical Sciences, 2013, 68: 125–139

[24] Mines R A, Tsopanos S, Shen Y, . Drop weight impact behavior of sandwich panels with metallic micro lattice cores. International Journal of Impact Engineering, 2013, 60: 120–132

[25] Smith M, Guan Z, Cantwell W J. Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique. International Journal of Mechanical Sciences, 2013, 67: 28–41

[26] Shen Y, Cantwell W, Mines R, . Low-velocity impact performance of lattice structure core based sandwich panels. Journal of Composite Materials, 2014, 48(25): 3153–3167

[27] Gümrük R, Mines R A, Karadeniz S. Static mechanical behaviours of stainless steel micro-lattice structures under different loading conditions. Materials Science and Engineering A, 2013, 586: 392–406

[28] Vrána R, Koutny D, Paloušek D, . Impact resistance of lattice structure made by selective laser melting technology. Modern Machinery (MM) Science Journal, 2015, 852–855

[29] McMillan M L, Jurg M, Leary M, . Programmatic generation of computationally efficient lattice structures for additive manufacture. Rapid Prototyping Journal, 2017, 23(3): 486–494

[30] Meng L, Zhang W, Quan D, . From topology optimization design to additive manufacturing: Today’s success and tomorrow’s roadmap. Archives of Computational Methods in Engineering, 2019 (in press)

[31] International Organization for Standardization. DIN EN ISO 604:2002, Plastics—Determination of Compressive Properties. 2002

RIGHTS & PERMISSIONS

Higher Education Press