Numerical analysis and experimental investigation of modal properties for the gearbox in wind turbine

Abstract

Wind turbine gearbox (WTG), which functions as an accelerator, ensures the performance and service life of wind turbine systems. This paper examines the distinctive modal properties of WTGs through finite element (FE) and experimental modal analyses. The study is performed in two parts. First, a whole system model is developed to investigate the first 10 modal frequencies and mode shapes of WTG using flexible multi-body modeling techniques. Given the complex structure and operating conditions of WTG, this study applies spring elements to the model and quantifies how the bearings and gear pair interactions affect the dynamic characteristics of WTGs. Second, the FE modal results are validated through experimental modal analyses of a 1.5 WM WTG using the frequency response function method of single point excitation and multi-point response. The natural frequencies from the FE and experimental modal analyses show favorable agreement and reveal that the characteristic frequency of the studied gearbox avoids its eigen-frequency very well.

Keywords

wind turbine gearbox / modal analysis / finite element analysis / modal frequency / bearing equivalence

References

[1] Yi P, Zhang C, Guo L, Dynamic modeling and analysis of load sharing characteristics of wind turbine gearbox. Advances in Mechanical Engineering, 2015, 7(3): 1–16

[2] Xing Y, Moan T. Multi-body modeling and analysis of a planet carrier in a wind turbine gearbox. Wind Energy (Chichester, England), 2013, 16(7): 1067–1089

[3] Hao D, Wang D. Finite-element modeling of the failure of interference-fit planet carrier and shaft assembly. Engineering Failure Analysis, 2013, 33: 184–196

[4] Zhang X. Study on modal analysis and structure optimization method of gearbox. Dissertation for the Master’s Degree. Taiyuan: Taiyuan University of Technology, 2010 (in Chinese)

[5] Xue Q, Li S. Finite element modal analysis of coupled vibration for test stand gearbox system. Journal of Mechanical Transmission, 2010, 9: 65–68 (in Chinese)

[6] Helsen J, Vanhollebeke F, Marrant B, Multi body modelling of varying complexity for modal behavior analysis of wind turbine gearboxes. Renewable Energy, 2011, 36(11): 3098–3113

[7] Park Y J, Lee G H, Song J S, Characteristic analysis of wind turbine gearbox considering non-torque loading. Journal of Mechanical Design, 2013, 135(4): 044501–044508

[8] Oudry J, Roth S, Lebaal N, Mesh density and mesh orientation dependence of FE model submitted to low-frequency vibration. International Journal of Computer Applications in Technology, 2012, 43(2): 101–109

[9] Xing Y, Moan T. Multi-body modeling and analysis of a planet carrier in a wind turbine gearbox. Wind Energy (Chichester, England), 2013, 16(7): 1067–1089

[10] Drača S. Finite element model of a double-stage helical gear reduction. Dissertation for the Master’s Degree. Windsor: University of Windsor, 2006

[11] Ying Y, Cao Y, Li Y, Study on flow parameters optimization for marine gas turbine intercooler system based on simulation experiment. International Journal of Computer Applications in Technology, 2013, 47(1): 56–67

[12] Ooi J B, Wang X, Tan C S, et al. Modal and stress analysis of gear train design in portal axle using finite element modeling and simulation. Journal of Mechanical Science and Technology, 2012, 26(2): 575–589

[13] Wei J, Lv C, Sun W, A study on optimum design method of gear transmission system for wind turbine. International Journal of Precision Engineering and Manufacturing, 2013, 14(5): 767–778

[14] Sun L, Wang C. Structural analysis and optimization of 1.5 MW wind turbine gearbox by using ANSYS. Dissertation for the Master’s Degree. Yinchuan: University of Ningxia, 2009

[15] Wei X, Pan H, Huang J. Measuring point optimization of a gearbox based on model measurement and analysis. Applied Science and Technology, 2011, 37(6): 1–4 (in Chinese)

[16] Zhu F, Zhu W, Yan J, Modelling and simulation on arc generatrix cone cover forming of shaped jet. International Journal of Computer Applications in Technology, 2013, 47(1): 23–31

[17] Ribeiro D, Calçada R, Delgado R, Finite element model updating of a bowstring-arch railway bridge based on experimental modal parameters. Engineering Structures, 2012, 40: 413–435

[18] Wang B T, Cheng D K. Modal analysis of md of system by using free vibration response data only. Journal of Sound and Vibration, 2008, 311(3–5): 737–755

[19] Xia X, Chen L. Fuzzy chaos method for evaluation of nonlinearly evolutionary process of rolling bearing performance. Measurement, 2013, 46(3): 1349–1354

[20] Cara F J, Juan J, Alarcón E, Modal contribution and state space order selection in operational modal analysis. Mechanical Systems and Signal Processing, 2013, 38(2): 276–298

[21] Reynders E, Roeck G D. Reference-based combined deterministic‒stochastic subspace identification for experimental and operational modal analysis. Mechanical Systems and Signal Processing, 2008, 22(3): 617–637

[22] Yi P, Dong L, Shi T. Multi-objective genetic algorithms based structural optimization and experimental investigation of the planet carrier in wind turbine gearbox. Frontier of Mechanical Engineering, 2014, 9(4): 354–367

Acknowledgement

This study is supported by the National High Technology Research and Development Program of China (Grant No. 2013AA040206).

RIGHTS & PERMISSIONS

2016 Higher Education Press and Springer-Verlag Berlin Heidelberg