Application of adaptive neuro-fuzzy inference system and cuckoo optimization algorithm for analyzing electro chemical machining process

Abstract

Electrochemical machining process (ECM) is increasing its importance due to some of the specific advantages which can be exploited during machining operation. The process offers several special privileges such as higher machining rate, better accuracy and control, and wider range of materials that can be machined. Contribution of too many predominate parameters in the process, makes its prediction and selection of optimal values really complex, especially while the process is programmized for machining of hard materials. In the present work in order to investigate effects of electrolyte concentration, electrolyte flow rate, applied voltage and feed rate on material removal rate (MRR) and surface roughness (SR) the adaptive neuro-fuzzy inference systems (ANFIS) have been used for creation predictive models based on experimental observations. Then the ANFIS 3D surfaces have been plotted for analyzing effects of process parameters on MRR and SR. Finally, the cuckoo optimization algorithm (COA) was used for selection solutions in which the process reaches maximum material removal rate and minimum surface roughness simultaneously. Results indicated that the ANFIS technique has superiority in modeling of MRR and SR with high prediction accuracy. Also, results obtained while applying of COA have been compared with those derived from confirmatory experiments which validate the applicability and suitability of the proposed techniques in enhancing the performance of ECM process.

Keywords

electrochemical machining process (ECM) / modeling / adaptive neuro-fuzzy inference system (ANFIS) / optimization / cuckoo optimization algorithm (COA)

References

[1] Tipton H. Dynamics of ECM process. Proc. 5th Int. MTDR Conf. Birmingham, UK, Pergamon, Oxford, 1964, 505-522

[2] McGeough J A. Advanced methods of machining. Chapman and Hall, London, 1988

[3] Amalnik M S, McGeough J A. Intelligent concurrent manufacturability evaluation of design for electrochemical machining. Journal of Materials Processing Technology, 1996, 61(1-2): 130-139

[4] Thorpe JF. A mathematical model of electrochemical machining process, 3rd Int. Sem. on Optimisation of Manufacturing Systems. CIRP, Pisa, Italy, 1971, CAP-19

[5] Chetty O V K, Murthy R, Radhakrishnan V. On some aspects of surface formation in ECM. Journal of Engineering for Industry, ASME, 1981, 103(3): 341-348

[6] Bhattacharyya B, Sorkhel S K. Computer-aided design of tools in ECM for accurate job machining, Proc. ISEM—9, Japan, 1989, 240-243

[7] Bhattacharyya B, Sorkhel S K. Investigation for controlled electrochemical machining through response surface methodology-based approach. Journal of Materials Processing Technology, 1999, 86(1-3): 200-207

[8] Senthikumar C, Ganesan G, Karthikeyan R. Study of electrochemical machining characteristics of Al/SiC_p composites. International Journal of Advanced Manufacturing Technology, 2009, 43(3-4): 256-263

[9] Puri A B, Branjee S. Multiple-response optimisation of electrochemical grinding characteristics through response surface methodology. International Journal of Advanced Manufacturing Technology, 2012,

[10] El-Taweel T A, Gouda S A. Performance analysis of wire electrochemical turning process—RSM approach. International Journal of Advanced Manufacturing Technology, 2011, 53(1-4): 181-190

[11] Temouri R, Baseri H. Artificial evolutionary approaches to produce smoother surface in magnetic abrasive finishing of hardened AISI 52100 steel. Journal of Mechanical Science and Technology, 2013, 27: 533-539

[12] Shayan AV, Azar Afza R, Teimouri R. Parametric study along with selection of optimal solutions in dry wire cut machining of cemented tungsten carbide (WC-Co). Journal of Manufacturing Processes, 2013,

[13] Teimouri R, Baseri H. Improvement of dry EDM process characteristics using artificial soft computing methodologies. Production Engineering Research and Development, 2012,

[14] Teimouri R, Baseri H, Rahmani B, Bakhshi-Jooybari M. Modeling and optimization of spring-back in bending process using multiple regression analysis and neural computation. International Journal of Material Forming. 2012.

[15] Caydas U, Hascalik A, Ekici S. An adaptive neuro-fuzzy inference system (ANFIS) model for wire-EDM. Expert Systems with Applications, 2009, 36(3): 6135-6139

[16] Gill S S, Singh J. An Adaptive Neuro-Fuzzy Inference System modeling for material removal rate in stationary ultrasonic drilling of sillimanite ceramic. Expert Systems with Applications, 2010, 37(8): 5590-5598

[17] Maji K, Pratihar D K. Forward and reverse mappings of electrical discharge machining process using adaptive network-based fuzzy inference system. Expert Systems with Applications, 2010, 37(12): 8566-8574

[18] Pradhan M K, Biswas C K. Neuro-fuzzy and neural network-based prediction of various responses in electrical discharge machining of AISI D2 steel. International Journal of Advanced Manufacturing Technology, 2010, 50(5-8): 591-610

[19] Rajabioun R. Cuckoo Optimization Algorithm. Applied Soft Computing, 2011, 11(8): 5508-5518

[20] Chandrasekaran K, Sishaj P S. Multi-objective scheduling problem: hybrid approach using fuzzy assisted cuckoo search algorithm. Swarm and Evolutionary Computation., 2012, 5: 1-16

[21] Jang J S R. ANFIS: Adaptive-Network-Based Fuzzy Inference System. IEEE Transactions on Systems, Man, and Cybernetics, 1993, 23(3): 665-685

[22] Babajanzade-Roshan S, Behboodi-Jooibari M, Teimouri R, Asgharzade-Ahmadi G, Falahati-Naghibi M, Sohrabpoor H. Optimization of friction stir welding process of AA7075 aluminum alloy to achieve desirable mechanical properties using ANFIS models and simulated annealing algorithm. International Journal of Advanced Manufactruign Technology, 2013.

[23] Bhattacharya B, Sorkhel S K. Response surface methodology based analysis for achieving controlled electrochemical machining. In: Proceedings of the 17th All India Machine Tool Design and Research Conference, 1997, 307-311

RIGHTS & PERMISSIONS

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg