Cylindrical particulate internal flows: A review

Abstract

The study of cylindrical particulate internal flows has wide industrial applicability hence received much attention. This article reviews the cylindrical particulate internal flows over the past twenty years. The research is related to the cylindrical particulate flows in the straight channel, curved channel and rotational channel. Finally, several open research issues have been identified.

Keywords

cylindrical particulate flow / internal flow

References

[1] Altan M C, Guceri S I, Pipes R B. Anisotropic channel flow of fiber suspensions. Journal of Non-Newtonian Fluid Mechanics, 1992, 42(1,2): 65–83

[2] Oosthuizen P H, Chen S, Kuhn D C S. Fluid and fiber flow near a wall slot in a channel. Pulp & Paper-Canada, 1994, 95(5): 27–30

[3] Tang L, Altan M C. Entry flow of fiber suspensions in a straight channel. Journal of Non-Newtonian Fluid Mechanics, 1995, 56(2): 183–216

[4] Develter P G, Duffy G G. Flow of wood pulp fiber suspensions in open channels. Appita Journal, 1998, 51(5): 356–362

[5] Chiba K, Yasuda K, Nakamura K. Numerical solution of fiber suspension flow through a parallel plate channel by coupling flow field with fiber orientation distribution. Journal of Non-Newtonian Fluid Mechanics, 2001, 99(2,3): 145–157

[6] Lin J Z, Li J, Zhang W F. Orientation distribution of fibers in a channel flow of fiber suspension. Chinese Physics, 2005, 14(12): 2529–2538

[7] Park J, Butler J E. Inhomogeneous distribution of a rigid fiber undergoing rectilinear flow between parallel walls at high Peclet numbers. Journal of Fluid Mechanics, 2009, 630: 267–298

[8] Krochak P J, Olson J A, Martinez D M. Near-wall estimates of the concentration and orientation distribution of a semi-dilute rigid fiber suspension in Poiseuille flow. Journal of Fluid Mechanics, 2010, 653: 431–462

[9] Manhart M. Rheology of suspensions of rigid-rod like particles in turbulent channel flow. Journal of Non-Newtonian Fluid Mechanics, 2003, 112(2,3): 269–293

[10] Xu H J, Aidun C K. Characteristics of fiber suspension flow in a rectangular channel. International Journal of Multiphase Flow, 2005, 31(3): 318–336

[11] Lin J Z, Gao Z Y, Zhou K, Chan T L. Mathematical modeling of turbulent fiber suspension and successive iteration solution in the channel flow. Applied Mathematical Modelling, 2006, 30(9): 1010–1020

[12] Zhang H F, Ahmadi G, Asgharian B. Transport and deposition of angular fibers in turbulent channel flows. Aerosol Science and Technology, 2007, 41(5): 529–548

[13] Gillissen J J J, Boersma B J, Mortensen P H, Andersson H I. The stress generated by non-Brownian fibers in turbulent channel flow simulations. Physics of Fluids, 2007, 19(11): 115107

[14] Lin J Z, Shen S H. A theoretical model of turbulent fiber suspension and its application to the channel flow. Science China—Physics Mechanics & Astronomy, 2010, 53(9): 1659–1670

[15] Sykes P, Rallison J M. Lubrication theory for a fiber suspension: Part 1, pressure-driven flow in a planar channel having slowly-varying cross-section. Journal of Non-Newtonian Fluid Mechanics, 1997, 71(1,2): 109–136

[16] Lin J Z, Zhang L X, Wang Y L. Research on the distribution function and orientation tensors of fiber suspensions in wedge-shaped flow field. Journal of Hydrodynamics. Ser. B, 2002, 14(1): 38–44

[17] Krochak P J, Olson J A, Martinez D M. The orientation of semi-dilute rigid fiber suspensions in a linearly contracting channel. Physics of Fluids, 2008, 20(7): 073303

[18] Krochak P J, Olson J A, Martinez D M. Fiber suspension flow in a tapered channel: The effect of flow/fiber coupling. International Journal of Multiphase Flow, 2009, 35(7): 676–688

[19] Olson J A, Frigaard I, Chan C, Hämäläinen J P. Modeling a turbulent fibre suspension flowing in a planar contraction: The one-dimensional headbox. International Journal of Multiphase Flow, 2004, 30(1): 51–66

[20] Parsheh M, Brown M L, Aidun C K. On the orientation of stiff fibres suspended in turbulent flow in a planar contraction. Journal of Fluid Mechanics, 2005, 545(1): 245–269

[21] Parsheh M, Brown M L, Aidun C K. Investigation of closure approximations for fiber orientation distribution in contracting turbulent flow. Journal of Non-Newtonian Fluid Mechanics, 2006, 136(1): 38–49

[22] Parsheh M, Brown M L, Aidun C K. Variation of fiber orientation in turbulent flow inside a planar contraction with different shapes. International Journal of Multiphase Flow, 2006, 32(12): 1354– 1369

[23] Lin J Z, Zhang S L, Olson J A. Effect of fibers on the flow property of turbulent fiber suspensions in a contraction. Fibers and Polymers, 2007, 8(1): 60–65

[24] Hyensjo M, Dahlkild A. Study of the rotational diffusivity coefficient of fibers in planar contracting flows with varying turbulence levels. International Journal of Multiphase Flow, 2008, 34(9): 894–903

[25] Townsend P, Walters K. Expansion flows of non-newtonian liquids. Chemical Engineering Science, 1994, 49(5): 748–763

[26] Baloch A, Webster M F. A Computer-simulation of complex flows of fiber suspensions. Computers & Fluids, 1995, 24(2): 135–151

[27] Verweyst B E, Tucker C L III. Fiber suspensions in complex geometries: Flow/orientation coupling. Canadian Journal of Chemical Engineering, 2002, 80(6): 1093–1106

[28] Lu Z M, Khoo B C, Dou H S, Phan-Thien N, Seng Yeo K. Numerical simulation of fiber suspension flow through an axisymmetric contraction and expansion passages by Brownian configuration field method. Chemical Engineering Science, 2006, 61(15): 4998–5009

[29] Ku X K, Lin J Z. Fiber orientation distributions in slit channel flows with abrupt expansion for fiber suspensions. Journal of Hydrodynamics, 2008, 20(6): 696–705

[30] Nsom B. Stability of fiber suspension flow in curved channel. Journal de Physique. II, 1996, 6(10): 1483–1492

[31] Chinesta F, Chaidron G. Short fibers suspension in steady recirculating flows. Canadian Journal of Chemical Engineering, 2002, 80(3): 355–362

[32] Chinesta F, Chaidron G, Poitou A. On the solution of Fokker-Planck equations in steady recirculating flows involving short fiber suspensions. Journal of Non-Newtonian Fluid Mechanics, 2003, 113(2,3): 97–125

[33] Chiba K, Ammar A, Chinesta F. On the fiber orientation in steady recirculating flows involving short fibers suspensions. Rheologica Acta, 2005, 44(4): 406–417

[34] Wan Z H, Lin J Z, You Z J. The effects of closure model of fiber orientation tensor on the instability of fiber suspensions in the Taylor-Couette flow. Modern Physics Letters B, 2007, 21(24): 1611–1625

[35] Zhang Q H, Lin J Z, Wang C X. Orientation distribution of fibers immersed in a curved expansion duct. International Journal of Nonlinear Sciences and Numerical Simulation, 2009, 10(11,12): 1585–1594

[36] Lin J Z, Zhang Q H, Zhang K. Rheological properties of fiber suspensions flowing through a curved expansion duct. Polymer Engineering and Science, 2010, 50(10): 1994–2003

[37] Bennington C P J, Kerekes R J, Grace J R. Motion of pulp fiber suspensions in rotary devices. Canadian Journal of Chemical Engineering, 1991, 69(1): 251–258

[38] Wang J, Silva C A, Viana J C, van Hattum F W J, Cunha A M, Tucker C L. Prediction of fiber orientation in a rotating compressing and expanding mold. Polymer Engineering and Science, 2008, 48(7): 1405–1413

[39] Zhang Q H, Li Y X, Lin J Z. Numerical simulation of cylinder orientation through a rotating straight expansion duct. Journal of Drainage and Irrigation Machinery Engineering, 2010, 5: 422–427

[40] Zhang Q H, Lin J Z. Orientation distribution and rheological properties of fiber suspensions flowing through curved expansion and rotating ducts. Journal of Hydrodynamics. Ser. B, 2010, 22(5): 920–925

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg