Gray-box modeling and QFT control for precision servo transmission systems

Abstract

Precision servo transmission systems have widely been applied in industrial equipment to achieve high accuracy and high speed motion. However, due to the presence of friction and uncertainty, the characteristics of precision servo transmission systems are variant depends on the working conditions, leading to oscillation and instability in the system performances. In this paper, a grey-box model of the system is established, the model structure derived from the theoretical modeling and the model parameters are obtained by experiments using set membership identification method. This paper proposes two-degrees of freedom (2-DOF) robust position controller for a precision servo transmission system, based on the quantitative feedback theory (QFT), to achieve high accuracy and consistent tracking performance even in presence of considerable system uncertainties and friction disturbances. The results of simulate and experiment validate the effectiveness of the proposed controller.

Keywords

precision servo transmission system / modeling / set membership identification / quantitative feedback theory (QFT) / robustness

References

[1] Sohlberg B. Grey box modelling for model predictive control of a heating process. Journal of Process Control, 2003, 13(3): 225-238

[2] Oliver J A, Prieto R, Cobos J A, Garacia O, Alou P. Hybrid wiener-hammerstein structure for grey-box modeling of DC-DC converters. Applied Power Electronics Conference and Exhibit, 2009, 280-285

[3] Platanitis G, Shkarayev S. Integration of an autopilot for a micro air vehicle. AIAA Infotech Aerospace 2005 Conference and Exhibit, 2005, 1-19

[4] Lee T H, Tan K K, Huang S. Adaptive friction compensation with a dynamical friction model. IEEE/ASME Transactions on Mechatronics, 2011, 16(1): 133-140

[5] Lotfi M, Mouloud D, Yoichi H.Robust tracking controller design with uncertain friction compensation based on local modeling apporach. IEEE/ASME Transactions on Mechatronics, 2010, 15(5): 746-756

[6] Selmic R R, Lewis F L. Backlash compensation in nonlinear systems using dynamic inversion by neural networks. Asian Journal of Control, 2000, 2(2): 76-87

[7] Meenakshi M, Seetharama Bhat M. Robust fixed-order H₂ controller for micro air vehicle-design and validation. Optimal Control Applications and Methods, 2006, 27(4): 183-210

[8] Chen X D, Watanabe K, Kiguchi K. An ART-based fuzzy controller for the adaptive navigation of a quadruped robot. IEEE/ASME Transactions Mechatronics, 2002, 8: 318-328

[9] Horowitz I. Fundamental theory of automatic linear feedback control systems. Institute of Radio Engineers Trans. Automatic Control, 1959, 4(3): 5-19

[10] Bailey F N, Hui C N. Loop gain-phase shaping for single-input-single-output robust controllers. IEEE Control Systems Magazine, 1991, 11(1): 93-101

[11] Wu S F, Grimble M J, Wei W. QFT-based robust/fault-tolerant flight control design for a remote pilotless vehicle. IEEE Transactions on Control Systems Technology, 2000, 8(6): 1010-1016

[12] Song Y, Deng H, Zhang Z L. Application of QFT to design of lateral flight control system. Fire Control and Command Control, 2007, 32: 72-75

[13] Zhang F X, Zhu R, Xiong W. Augmented-stability controller for micro air vehicle based on quantitative feedback theory. Journal of Tsinghua University (Sci & Tech), 2010, 50(2): 219-223

[14] Liu X M. Design of a tracking control system for antenna stabilized platform based on quantitative feedback theory. Electronics Optics & Control, 2009, 16: 83-86

Acknowledgement

This study was supported in part by the National Basic Research Program of China (973 Program) (No. 2009 CB724205) and the National High-Tech R&D Program of China (863 Program) (No. 2009AA04 Z148).

RIGHTS & PERMISSIONS

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg