Noise control technology for generator sets in
enclosures
ZHANG Nailong, YANG Wentong, FEI Renyuan
Author information+
College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology
Show less
History+
Published
05 Dec 2008
Issue Date
05 Dec 2008
Abstract
Currently, noise pollution is an environmental problem all over the world. The health and life of human beings are affected by loud noise from high power generator sets. To reduce such noise, a sound-attenuated enclosure is widely used for its high performance and convenient usage. By installing equipment in an enclosure, noise is controlled and prevented from radiating. In this paper, noise control techniques for enclosures are presented. Enclosure development trends are predicted.
ZHANG Nailong, YANG Wentong, FEI Renyuan.
Noise control technology for generator sets in
enclosures. Front. Mech. Eng., 2008, 3(4): 377‒384 https://doi.org/10.1007/s11465-008-0051-0
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
This is a preview of subscription content, contact us for subscripton.
References
1. Maa Dayou . Engineering Handbooks of Noise and Vibration Control. Beijing: Machinery Industry Press, 2002 (in Chinese) 2. Jackson R S . The performance of acoustical hoods at low frequencies. Acoustica, 1962, 12: 139–152 3. Junger M C . Sound transmission through an elastic enclosure acoustically coupledto a noise source. ASME paper No.70-WA/DE-12, 1970 4. Lee Y Y, Ng C F . Sound insertion loss of stiffenedenclosure plates using the finite element method and the classicalapproach. Journal of Sound and Vibration, 1998, 217(2): 239–260. doi:10.1006/jsvi.1998.1748 5. Lee Y Y, Ng C F . The prediction of the effectsof stiffness and damping on noise reduction of small enclosures. The Fifth International Conference on Recent Advancesin Structural Dynamics. ISVR, UK, 1994 : 1023–1032 6. Lee Y Y, Ng C F . The noise and vibration reductionof close fitting curved enclosure panels. In: : Proceeding of The International Conference on Structural Dynamics,Vibration, Noise and Control. Hong Kong, 1995 : 1201–1206 7. Lee Y Y, Ng C F . The effects of coupled source/cavitymodes on the acoustic insertion loss of close-fitting enclosures. Journal of Building Acoustics, 1997 : 549–567 8. Lee Y Y, Ng C F . Insertion loss of stiffenedenclosures. The Sixth International Conferenceon Recent Advances in Structural Dynamics. ISVR, UK, 1997 : 553–562 9. Gong Lihong, Sheng Wedong, Yuan Chun, et al.. The application of micro-hole PC board in smallgasoline noise control. Movable Power Station &Vehicle, 2000 (4): 28–31(in Chinese) 10. Bradley J S, Birta J A . A simple model of the soundinsulation of gypsum board on resilient supports. Noise Control Eng J, 2001, 49(5): 216–223. doi:10.3397/1.2839663 11. Antonio U, Ana L, Jaime L . Technical note: the influence of insulation thicknessand number of layers of gypsum wall board of lightweight partitionsound transmission loss. Noise ControlEng J, 2001, 49(5): 238–240. doi:10.3397/1.2839666 12. Wang Lucai, Wang Fang, Ren Jianfu . Study on sound insulation property of aluminum foam, Metallic functional materials, 2001, 8(6): 21–24 (in Chinese) 13. Jaehwan K, Lee J K . Broadband transmission noisereduction of smart panels featuring piezoelectric shunt circuits andsound-absorption material. J Acoust SocAm, 2002, 112: 990. doi: 10.1121/1.1497367 14. Jaehwan K, Choi J Y, Ran H C . Noise reduction performance of smart panels incorporatingpiezoelectric shunt damping. Proc SPIE 4698, 2002: 143 15. Zhou Xinxiang, Li Haidong, Liu Qingyao . Dynamic characteristics analysis of the sound insulatinghood's muffler. Journal of Vibration Engineering, 2004, 17: 1064–1066 (in Chinese) 16. Li Haitao, Zhu Xi, Shi Yong, et al.. Development of porous sound-absorbing materials. Journal of Material Science & Engineering, 2004, 22: 934–938 (in Chinese) 17. Qi Gongjin, Yang Shengliang, Zhao Xun . Advances in sound-absorbing foam materials. Development and Application of Material, 2002, 1: 40–44 (in Chinese) 18. Zhong Xiangzhang, Hu Songchun, Zhang Yin . Sound absorption coefficient of polyurethane foam plasticslabs. Noise and Vibration Control, 1993 (3): 28–30 (in Chinese) 19. Glenn E W . Geometric sound absorbers. J Acoust SocAm, 2000, 108: 2464 20. Lee YY, Lee E W M . Widening the sound absorptionbandwidths of flexible micro-perforated curved absorbers using structuraland acoustic resonances. InternationalJournal of Mechanical Sciences, 2007, 49: 925–934. doi:10.1016/j.ijmecsci.2007.01.008 21. Maa DahYou . Potential of microperforated panel absorber. Acoustical Society of America, 1998, 104(5): 2861–2866. doi:10.1121/1.423870 22. Gong Jinxia, Li Li . Research on the problem ofreducing noise of diesel generator set. Journal of Zhengzhou Textile Institute, 2000, 11: 24–26 (in Chinese) 23. Lu Xiaojun, Sun Wei, Liang Jie, et al.. Experimental research on exhaust silencer offoamed aluminum alloy. Journal of AgriculturalMachinery, 1999, 30: 36–40 (in Chinese) 24. Jonathan Z . Domemuffler. J Acoust Soc Am, 2001,109: 857 25. Kory J S, Gary D G . Cross flow baffle muffler. J Acoust Soc Am, 2001, 109: 23 26. Liu Jinchun . Frequency response of sound transmission loss for noise silencersof expansion chamber. Journal Suzhou Instituteof Urban Construction and Environmental Protection, 1995, 3(1): 61–69 (in Chinese) 27. Lueg P . US Patent 2043416, 1936-06-09 28. Chaplin B B . US Patent 4153815 29. Elliot S J . Nelson P A, Stothers I M, et al.. In-flight experiments in the active controlof propeller-induced cabin noise. J Soundand Vib, 1990, 140(2): 219–238. doi:10.1016/0022-460X(90)90525-5 30. Salikuddin M, Tanna H K, Burrin R H, et al.. Application of active noise control to modelpropeller noise. Journal of Sound and Vibration, 1989, 137(1): 9–41. doi:10.1016/0022-460X(90)90714-B 31. Elliott S J, Nelson P A . Active noise control. IEEE Signal Processing Magazine, 1993 (10): 12–34 32. Chen Kean . Active Noise Control. Beijing: National Defense Press, 2003 (in Chinese) 33. Herbruggen J, Raeymaeckers J, Sas P . Integration of active noise control in an acoustic encapsulation. Acustica-Acta Acustica Suppl 1, 1996, 82: S194 34. Enamito A, Hayashi T, Kurata K . Active control of the noise radiated from an engine enclosure. In: : Proceedings of Internoise 1998, Christchurch, New Zealand 35. Hessen W . Practicalexperience with an active noise control installation in the exhaustgas line of a co-generation plant engine. Acustica-Acta Acustica Suppl 1, 1996, 82: S195 36. María C, Pedro C . Active control of the exhaustnoise radiated by an enclosed generator. Applied Acoustics, 2000, 61(1): 83–94. doi:10.1016/S0003-682X(99)00062-6 37. Pfretzschner J, Cobo P, Bote D, et al.. Active control and microperforated panels. In: : Proceedings of the Euronoise, Naples, 2003 : ID 144 38. Cobo P, Pfretzschner J, Cuesta M, Fernandez A . Hybridpassive-active sound absorption in a standing wave tube using a thinplate actuator as secondary source. In: : Proceedings of the ICA, 2004 : 1281–1284 39. Cobo P, Pfretzschner J, Cuesta M, et al.. Anthony, hybrid passive-active-absorption usingmicroperforated panels. J Acoust Soc Am, 2004, 112(3): 2118–2125. doi:10.1121/1.1786831 40. Niu Feng, Li Ningrong, Qiu Xiaojun . Preliminary experimental research on application of activenoise control in the enclosure. AppliedAcoustics, 2005, 24(5): 281–285 (in Chinese) 41. Wu Bin . Research on active noise attenuation of engine exhaust based on adaptivecontrol technology. PhD Dissertation of Beijing Universityof Technology, 2001 42. Wu Bin, Zhou Dasen, Fei Renyuan, et al.. An experimental investigation into active adaptivenoise control for ducts using motional feedback loudspeaker. Small Internal Combustion Engine, 2001, 30(5): 8–10 43. Wu Bin, Fei Renyuan, Zhou Dasen . Study on acoustic character of active noise attenuationin ducts I theoretical analysis. Journalof Beijing Polytechnic University, 2003, 29(4): 411–414 44. Wu Bin, Fei Renyuan, Zhou Dasen . Study on acoustic character of active noise attenuationin ducts II experiment. Journal of BeijingPolytechnic University, 2003, 10(1): 31–34 45. Yi Shanzhen, Fei Renyuan, Zhou Dasen, et al.. A new hybrid active noise control system: adaptiveplant disturbance canceling structure combined with narrowband adaptivenoise canceling structure. Inter-Noise2003, Korea: Jeju International Convention Center, 2003 : 1012–1019 46. Yi Shanzhen . Optimal research on the adaptive active control system for engineexhaust noise attenuation. PhD Dissertation of BeijingUniversity of Technology, 2004 47. Zhang Nailong, Yang Wentong, Fei Renyuan . Research and development on active sound attenuated enclosurefor generator set. In: : Proceedings ofIsma 2006, 2006 : 301–308 48. Zhang Nailong . A research on key techniques of noise control in the semi-enclosure. PhD Dissertation of Beijing University of Technology, 2007
AI Summary 中Eng×
Note: Please note that the content below is AI-generated. Frontiers Journals website shall not be held liable for any consequences associated with the use of this content.