Two-Phase Flow in Porous Electrodes of Proton Exchange Membrane Fuel Cell

Abstract

Water management in porous electrodes bears significance due to its strong potential in determining the performance of proton exchange membrane fuel cell. In terms of porous electrodes, internal water distribution and removal process have extensively attracted attention in both experimental and numerical studies. However, the structural difference among the catalyst layer (CL), microporous layer (MPL), and gas diffusion layer (GDL) leads to significant challenges in studying the two-phase flow behavior. Given the different porosities and pore scales of the CL, MPL, and GDL, the model scales in simulating each component are inconsistent. This review emphasizes the numerical simulation related to porous electrodes in the water transport process and evaluates the effectiveness and weakness of the conventional methods used during the investigation. The limitations of existing models include the following: (i) The reconstruction of geometric models is difficult to achieve when using the real characteristics of the components; (ii) the computational domain size is limited due to massive computational loads in three-dimensional (3D) simulations; (iii) numerical associations among 3D models are lacking because of the separate studies for each component; (iv) the effects of vapor condensation and heat transfer on the two-phase flow are disregarded; (v) compressive deformation during assembly and vibration in road conditions should be considered in two-phase flow studies given the real operating conditions. Therefore, this review is aimed at critical research gaps which need further investigation. Insightful potential research directions are also suggested for future improvements.

Keywords

PEMFC / Porous electrodes / Two-phase flow / Water management

References

[1] Ji MB, Wei ZD. A review of water management in polymer electrolyte membrane fuel cells. Energies, 2009, 2(4): 1057-1106.

[2] Luo YQ, Jiao K. Cold start of proton exchange membrane fuel cell. Prog Energy Combust Sci, 2018, 64: 29-61.

[3] Kim J, Luo G, Wang CY. Modeling two-phase flow in three-dimensional complex flow-fields of proton exchange membrane fuel cells. J Power Sources, 2017, 365: 419-429.

[4] Zhang GB, Jiao K. Multi-phase models for water and thermal management of proton exchange membrane fuel cell: a review. J Power Sources, 2018, 391: 120-133.

[5] Liu X, Guo H, Ma CF. Water flooding and two-phase flow in cathode channels of proton exchange membrane fuel cells. J Power Sources, 2006, 156(2): 267-280.

[6] Qin CZ, Hassanizadeh SM. A new approach to modelling water flooding in a polymer electrolyte fuel cell. Int J Hydrogen Energy, 2015, 40(8): 3348-3358.

[7] Stumper J, Löhr M, Hamada S. Diagnostic tools for liquid water in PEM fuel cells. J Power Sources, 2005, 143(1–2): 150-157.

[8] Deng H, Hou YZ, Jiao K. Lattice Boltzmann simulation of liquid water transport inside and at interface of gas diffusion and micro-porous layers of PEM fuel cells. Int J Heat Mass Transf, 2019, 140: 1074-1090.

[9] Weber AZ, Newman J. Effects of microporous layers in polymer electrolyte fuel cells. J Electrochem Soc, 2005, 152(4): A677.

[10] Niu ZQ, Wang Y, Jiao K, et al. Two-phase flow dynamics in the gas diffusion layer of proton exchange membrane fuel cells: volume of fluid modeling and comparison with experiment. J Electrochem Soc, 2018, 165(9): F613-F620.

[11] Fadzillah DM, Rosli MI, Talib MZM, et al. Review on microstructure modelling of a gas diffusion layer for proton exchange membrane fuel cells. Renew Sustain Energy Rev, 2017, 77: 1001-1009.

[12] Gao Y, Hou Z, Wu XY, et al. The impact of sample size on transport properties of carbon-paper and carbon-cloth GDLs: direct simulation using the lattice Boltzmann model. Int J Heat Mass Transf, 2018, 118: 1325-1339.

[13] Jinuntuya F, Whiteley M, Chen R, et al. The effects of gas diffusion layers structure on water transportation using X-ray computed tomography based Lattice Boltzmann method. J Power Sources, 2018, 378: 53-65.

[14] García-Salaberri PA, Hwang G, Vera M, et al. Effective diffusivity in partially-saturated carbon-fiber gas diffusion layers: effect of through-plane saturation distribution. Int J Heat Mass Transf, 2015, 86: 319-333.

[15] Bednarek T, Tsotridis G. Calculation of effective transport properties of partially saturated gas diffusion layers. J Power Sources, 2017, 340: 111-120.

[16] Hao L, Cheng P. Lattice Boltzmann simulations of anisotropic permeabilities in carbon paper gas diffusion layers. J Power Sources, 2009, 186(1): 104-114.

[17] Schulz VP, Becker J, Wiegmann A, et al. Modeling of two-phase behavior in the gas diffusion medium of PEFCs via full morphology approach. J Electrochem Soc, 2007, 154(4): B419.

[18] Tayarani-Yoosefabadi Z, Harvey D, Bellerive J, et al. Stochastic microstructural modeling of fuel cell gas diffusion layers and numerical determination of transport properties in different liquid water saturation levels. J Power Sources, 2016, 303: 208-221.

[19] Sasabe T, Deevanhxay P, Tsushima S, et al. Soft X-ray visualization of the liquid water transport within the cracks of micro porous layer in PEMFC. Electrochem Commun, 2011, 13(6): 638-641.

[20] Wargo EA, Schulz VP, Çeçen A, et al. Resolving macro- and micro-porous layer interaction in polymer electrolyte fuel cells using focused ion beam and X-ray computed tomography. Electrochim Acta, 2013, 87: 201-212.

[21] Siddique NA, Liu FQ. Process based reconstruction and simulation of a three-dimensional fuel cell catalyst layer. Electrochim Acta, 2010, 55(19): 5357-5366.

[22] Chen L, Wu G, Holby EF, et al. Lattice Boltzmann pore-scale investigation of coupled physical-electrochemical processes in C/Pt and non-precious metal cathode catalyst layers in proton exchange membrane fuel cells. Electrochim Acta, 2015, 158: 175-186.

[23] Tsushima S, Teranishi K, Hirai S. Water diffusion measurement in fuel-cell SPE membrane by NMR. Energy, 2005, 30(2–4): 235-245.

[24] Feindel KW, Bergens SH, Wasylishen RE. The use of 1H NMR microscopy to study proton-exchange membrane fuel cells. Chem Phys Chem, 2006, 7(1): 67-75.

[25] Satija R, Jacobson DL, Arif M, et al. In situ neutron imaging technique for evaluation of water management systems in operating PEM fuel cells. J Power Sources, 2004, 129(2): 238-245.

[26] Kramer D, Lehmann E, Frei G, et al. An on-line study of fuel cell behavior by thermal neutrons. Nucl Instrum Methods Phys Res Sect A Accel Spectrom Detect Assoc Equip, 2005, 542(1–3): 52-60.

[27] Nam JH, Kaviany M. Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium. Int J Heat Mass Transf, 2003, 46(24): 4595-4611.

[28] Lim C, Wang CY. Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell. Electrochim Acta, 2004, 49(24): 4149-4156.

[29] Lee SJ, Lim NY, Kim S, et al. X-ray imaging of water distribution in a polymer electrolyte fuel cell. J Power Sources, 2008, 185(2): 867-870.

[30] Manke I, Hartnig C, Grünerbel M, et al. Investigation of water evolution and transport in fuel cells with high resolution synchrotron X-ray radiography. Appl Phys Lett, 2007, 90(17): 174105.

[31] Tüber K, Pócza D, Hebling C. Visualization of water buildup in the cathode of a transparent PEM fuel cell. J Power Sources, 2003, 124(2): 403-414.

[32] Hakenjos A, Muenter H, Wittstadt U, et al. A PEM fuel cell for combined measurement of current and temperature distribution, and flow field flooding. J Power Sources, 2004, 131(1–2): 213-216.

[33] Bazylak A. Liquid water visualization in PEM fuel cells: a review. Int J Hydrogen Energy, 2009, 34(9): 3845-3857.

[34] Ferreira RB, Falcão DS, Oliveira VB, et al. 1D + 3D two-phase flow numerical model of a proton exchange membrane fuel cell. Appl Energy, 2017, 203: 474-495.

[35] Das PK, Li XG, Liu ZS. Analysis of liquid water transport in cathode catalyst layer of PEM fuel cells. Int J Hydrogen Energy, 2010, 35(6): 2403-2416.

[36] Kongkanand A, Subramanian NP, Yu YC, et al. Achieving high-power PEM fuel cell performance with an ultralow-Pt-content core-shell catalyst. ACS Catal, 2016, 6(3): 1578-1583.

[37] Bao ZM, Niu ZQ, Jiao K. Analysis of single- and two-phase flow characteristics of 3-D fine mesh flow field of proton exchange membrane fuel cells. J Power Sources, 2019, 438: 226995.

[38] Nguyen TV, Lin GY, Ohn H, et al. Measurements of two-phase flow properties of the porous media used in PEM fuel cells. ECS Trans, 2006, 3: 415-423.

[39] Kusoglu A, Kwong A, Clark KT, et al. Water uptake of fuel-cell catalyst layers. J Electrochem Soc, 2012, 159(9): F530-F535.

[40] Ding YL, Bi XT, Wilkinson DP. 3D simulations of the impact of two-phase flow on PEM fuel cell performance. Chem Eng Sci, 2013, 100: 445-455.

[41] Wang GQ, Mukherjee PP, Wang CY. Direct numerical simulation (DNS) modeling of PEFC electrodes. Electrochim Acta, 2006, 51(15): 3139-3150.

[42] Lange KJ, Sui PC, Djilali N. Pore scale simulation of transport and electrochemical reactions in reconstructed PEMFC catalyst layers. J Electrochem Soc, 2010, 157(10): B1434.

[43] Gostick JT, Ioannidis MA, Fowler MW, et al. On the role of the microporous layer in PEMFC operation. Electrochem Commun, 2009, 11(3): 576-579.

[44] Lu ZJ, Daino MM, Rath C, et al. Water management studies in PEM fuel cells, part III: dynamic breakthrough and intermittent drainage characteristics from GDLs with and without MPLs. Int J Hydrogen Energy, 2010, 35(9): 4222-4233.

[45] Kadowaki K, Tabe Y, Chikahisa T. Role of micro-porous layer for water transfer phenomena in PEFC. ECS Trans, 2011, 41(1): 431-438.

[46] Pasaogullari U, Wang CY. Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells. Electrochim Acta, 2004, 49(25): 4359-4369.

[47] Omrani R, Shabani B. Gas diffusion layer modifications and treatments for improving the performance of proton exchange membrane fuel cells and electrolysers: a review. Int J Hydrogen Energy, 2017, 42(47): 28515-28536.

[48] Chen J, Xu HF, Zhang HM, et al. Facilitating mass transport in gas diffusion layer of PEMFC by fabricating micro-porous layer with dry layer preparation. J Power Sources, 2008, 182(2): 531-539.

[49] Ismail MS, Borman D, Damjanovic T, et al. On the through-plane permeability of microporous layer-coated gas diffusion layers used in proton exchange membrane fuel cells. Int J Hydrogen Energy, 2011, 36(16): 10392-10402.

[50] Orogbemi OM, Ingham DB, Ismail MS, et al. The effects of the composition of microporous layers on the permeability of gas diffusion layers used in polymer electrolyte fuel cells. Int J Hydrogen Energy, 2016, 41(46): 21345-21351.

[51] Ismail MS, Damjanovic T, Ingham DB, et al. Effect of polytetrafluoroethylene-treatment and microporous layer-coating on the electrical conductivity of gas diffusion layers used in proton exchange membrane fuel cells. J Power Sources, 2010, 195(9): 2700-2708.

[52] Burheim OS, Su HN, Pasupathi S, et al. Thermal conductivity and temperature profiles of the micro porous layers used for the polymer electrolyte membrane fuel cell. Int J Hydrogen Energy, 2013, 38(20): 8437-8447.

[53] Thomas A, Maranzana G, Didierjean S, et al. Thermal and water transfer in PEMFCs: investigating the role of the microporous layer. Int J Hydrogen Energy, 2014, 39(6): 2649-2658.

[54] Ito H, Heo Y, Ishida M, et al. Application of a self-supporting microporous layer to gas diffusion layers of proton exchange membrane fuel cells. J Power Sources, 2017, 342: 393-404.

[55] Owejan JP, Owejan JE, Gu WB, et al. Water transport mechanisms in PEMFC gas diffusion layers. J Electrochem Soc, 2010, 157(10): B1456.

[56] Aoyama Y, Suzuki K, Tabe Y, et al. Observation of water transport in the micro-porous layer of a polymer electrolyte fuel cell with a freezing method and cryo-scanning electron microscope. Electrochem Commun, 2014, 41: 72-75.

[57] Blanco M, Wilkinson DP. Investigation of the effect of microporous layers on water management in a proton exchange membrane fuel cell using novel diagnostic methods. Int J Hydrogen Energy, 2014, 39(29): 16390-16404.

[58] Malevich D, Halliop E, Peppley BA, et al. Investigation of charge-transfer and mass-transport resistances in PEMFCs with microporous layer using electrochemical impedance spectroscopy. J Electrochem Soc, 2009, 156(2): B216.

[59] Deevanhxay P, Sasabe T, Tsushima S, et al. Effect of liquid water distribution in gas diffusion media with and without microporous layer on PEM fuel cell performance. Electrochem Commun, 2013, 34: 239-241.

[60] Wang XL, Zhang HM, Zhang JL, et al. Micro-porous layer with composite carbon black for PEM fuel cells. Electrochim Acta, 2006, 51(23): 4909-4915.

[61] Yin Y, Wu TT, He P, et al. Numerical simulation of two-phase cross flow in microstructure of gas diffusion layer with variable contact angle. Int J Hydrogen Energy, 2014, 39(28): 15772-15785.

[62] Niu ZQ, Jiao K, Wang Y, et al. Numerical simulation of two-phase cross flow in the gas diffusion layer microstructure of proton exchange membrane fuel cells. Int J Energy Res, 2018, 42(2): 802-816.

[63] Barbir F. Main cell components, material properties, and processes. PEM Fuel Cells, 2013, 2 Amsterdam: Elsevier 73-117.

[64] Jayakumar A, Sethu SP, Ramos M, et al. A technical review on gas diffusion, mechanism and medium of PEM fuel cell. Ionics, 2015, 21(1): 1-18.

[65] Holmström N, Ihonen J, Lundblad A, et al. The influence of the gas diffusion layer on water management in polymer electrolyte fuel cells. Fuel Cells, 2007, 7(4): 306-313.

[66] Nguyen TV. Water management by material design and engineering for PEM fuel cells. ECS Trans, 2006, 3(1): 1171

[67] Koresawa R, Utaka Y. Improvement of oxygen diffusion characteristic in gas diffusion layer with planar-distributed wettability for polymer electrolyte fuel cell. J Power Sources, 2014, 271: 16-24.

[68] Selamet OF, Pasaogullari U, Spernjak D, et al. In situ two-phase flow investigation of proton exchange membrane (PEM) electrolyzer by simultaneous optical and neutron imaging. ECS Trans, 2011, 41(1): 349-362.

[69] Spernjak D, Prasad AK, Advani SG. Experimental investigation of liquid water formation and transport in a transparent single-serpentine PEM fuel cell. J Power Sources, 2007, 170(2): 334-344.

[70] Hussain N, van Steen E, Tanaka S, et al. Metal based gas diffusion layers for enhanced fuel cell performance at high current densities. J Power Sources, 2017, 337: 18-24.

[71] Natarajan D, Nguyen TV. A two-dimensional, two-phase, multicomponent, transient model for the cathode of a proton exchange membrane fuel cell using conventional gas distributors. J Electrochem Soc, 2003, 150(3): L5.

[72] Zhan Z, Xiao J, Zhang Y, et al. Gas diffusion through differently structured gas diffusion layers of PEM fuel cells. Int J Hydrogen Energy, 2007, 32(17): 4443-4451.

[73] Huang YX, Cheng CH, Wang XD, et al. Effects of porosity gradient in gas diffusion layers on performance of proton exchange membrane fuel cells. Energy, 2010, 35(12): 4786-4794.

[74] Niu ZQ, Bao ZM, Wu JT, et al. Two-phase flow in the mixed-wettability gas diffusion layer of proton exchange membrane fuel cells. Appl Energy, 2018, 232: 443-450.

[75] Flückiger R, Marone F, Stampanoni M, et al. Investigation of liquid water in gas diffusion layers of polymer electrolyte fuel cells using X-ray tomographic microscopy. Electrochim Acta, 2011, 56(5): 2254-2262.

[76] Shimpalee S, Beuscher U, van Zee JW. Analysis of GDL flooding effects on PEMFC performance. Electrochim Acta, 2007, 52(24): 6748-6754.

[77] Prasanna M, Ha HY, Cho EA, et al. Influence of cathode gas diffusion media on the performance of the PEMFCs. J Power Sources, 2004, 131(1–2): 147-154.

[78] Qi ZG, Kaufman A. Improvement of water management by a microporous sublayer for PEM fuel cells. J Power Sources, 2002, 109(1): 38-46.

[79] Soler J, Hontañón E, Daza L. Electrode permeability and flow-field configuration: influence on the performance of a PEMFC. J Power Sources, 2003, 118(1–2): 172-178.

[80] Lu Z, Waldecker J, Xie X, et al. Investigation of water transport in perforated gas diffusion layer by neutron radiography. ECS Trans, 2013, 58(1): 315-324.

[81] Manahan MP, Clement JT, Srouji AK, et al. Laser modified fuel cell diffusion media: engineering enhanced performance via localized water redistribution. J Electrochem Soc, 2014, 161(10): F1061-F1069.

[82] Haußmann J, Markötter H, Alink R, et al. Synchrotron radiography and tomography of water transport in perforated gas diffusion media. J Power Sources, 2013, 239: 611-622.

[83] Markötter H, Alink R, Haußmann J, et al. Visualization of the water distribution in perforated gas diffusion layers by means of synchrotron X-ray radiography. Int J Hydrogen Energy, 2012, 37(9): 7757-7761.

[84] Gerteisen D, Sadeler C. Stability and performance improvement of a polymer electrolyte membrane fuel cell stack by laser perforation of gas diffusion layers. J Power Sources, 2010, 195(16): 5252-5257.

[85] Okuhata G, Tonoike T, Nishida K, et al. Effect of perforation structure of cathode GDL on liquid water removal in PEFC. ECS Trans, 2013, 58(1): 1047-1057.

[86] Manahan MP, Mench MM. Laser perforated fuel cell diffusion media: engineered interfaces for improved ionic and oxygen transport. J Electrochem Soc, 2012, 159(7): F322-F330.

[87] Gerteisen D, Heilmann T, Ziegler C. Enhancing liquid water transport by laser perforation of a GDL in a PEM fuel cell. J Power Sources, 2008, 177(2): 348-354.

[88] Alink R, Haußmann J, Markötter H, et al. The influence of porous transport layer modifications on the water management in polymer electrolyte membrane fuel cells. J Power Sources, 2013, 233: 358-368.

[89] Alink R, Gerteisen D, Mérida W. Investigating the water transport in porous media for PEMFCs by liquid water visualization in ESEM. Fuel Cells, 2011, 11(4): 481-488.

[90] Niu ZQ, Wu JT, Bao ZM, et al. Two-phase flow and oxygen transport in the perforated gas diffusion layer of proton exchange membrane fuel cell. Int J Heat Mass Transf, 2019, 139: 58-68.

[91] Fazeli M, Hinebaugh J, Fishman Z, et al. Pore network modeling to explore the effects of compression on multiphase transport in polymer electrolyte membrane fuel cell gas diffusion layers. J Power Sources, 2016, 335: 162-171.

[92] Le AD, Zhou B. A general model of proton exchange membrane fuel cell. J Power Sources, 2008, 182(1): 197-222.

[93] Bao N, Zhou YB, Jiao K, et al. Effect of gas diffusion layer deformation on liquid water transport in proton exchange membrane fuel cell. Eng Appl Comput Fluid Mech, 2014, 8(1): 26-43.

[94] Satjaritanun P, Hirano S, Shum AD, et al. Fundamental understanding of water movement in gas diffusion layer under different arrangements using combination of direct modeling and experimental visualization. J Electrochem Soc, 2018, 165(13): F1115-F1126.

[95] Jeon DH, Kim H. Effect of compression on water transport in gas diffusion layer of polymer electrolyte membrane fuel cell using lattice Boltzmann method. J Power Sources, 2015, 294: 393-405.

[96] Han CL, Chen ZQ. Numerical simulations of two-phase flow in a proton-exchange membrane fuel cell based on the generalized design method. Energy Sources Part A Recover Util Environ Eff, 2019, 41(10): 1253-1271.

[97] Tranter TG, Burns AD, Ingham DB, et al. The effects of compression on single and multiphase flow in a model polymer electrolyte membrane fuel cell gas diffusion layer. Int J Hydrogen Energy, 2015, 40(1): 652-664.

[98] Chippar P, Kyeongmin O, Kang K, et al. A numerical investigation of the effects of GDL compression and intrusion in polymer electrolyte fuel cells (PEFCs). Int J Hydrogen Energy, 2012, 37(7): 6326-6338.

[99] Zenyuk IV, Parkinson DY, Hwang G, et al. Probing water distribution in compressed fuel-cell gas-diffusion layers using X-ray computed tomography. Electrochem Commun, 2015, 53: 24-28.

[100] Zhou X, Niu ZQ, Bao ZM, et al. Two-phase flow in compressed gas diffusion layer: finite element and volume of fluid modeling. J Power Sources, 2019, 437: 226933.

[101] Tian ZQ, Lim SH, Poh CK, et al. A highly order-structured membrane electrode assembly with vertically aligned carbon nanotubes for ultra-low Pt loading PEM fuel cells. Adv Energy Mater, 2011, 1(6): 1205-1214.

[102] Kongkanand A, Mathias MF. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells. J Phys Chem Lett, 2016, 7(7): 1127-1137.

[103] Tseng CJ, Tsai BT, Liu ZS, et al. A PEM fuel cell with metal foam as flow distributor. Energy Convers Manag, 2012, 62: 14-21.

[104] Kariya T, Hirono T, Funakubo H, et al. Effects of the porous structures in the porous flow field type separators on fuel cell performances. Int J Hydrogen Energy, 2014, 39(27): 15072-15080.

[105] Tsai BT, Tseng CJ, Liu ZS, et al. Effects of flow field design on the performance of a PEM fuel cell with metal foam as the flow distributor. Int J Hydrogen Energy, 2012, 37(17): 13060-13066.

[106] Park JE, Lim J, Lim MS, et al. Gas diffusion layer/flow-field unified membrane-electrode assembly in fuel cell using graphene foam. Electrochim Acta, 2019, 323: 134808.