New factor to characterize mechanism of “strong column-weak beam” of RC frame structures

Abstract

Most reinforced concrete(RC)frame structures did not achieve the “strong column-weak beam” failure mode in recent big earthquakes, resulting in a large number of casualties and significant property loss. To deal with this serious problem, a new column-beam relative factor was proposed to characterize the relative yield situation of column ends and beam ends. By limiting the column-beam relative factor, RC frame structures could achieve the “strong column-weak beam” failure mode under the excitation of strong ground motions. The limit values of column- beam relative factor were calculated, analyzed and verified by using structural simulation models for corner columns in the bottom story of structures, which are destroyed most seriously in earthquakes. The results show that the limit values should be analyzed under bi-directional ground motion and with different axial compression ratios of columns. The peak ground acceleration(PGA)of ground motions has no significant effect on the limit values, while the type of strong ground motions has a significant effect on the limit values.

Keywords

RC frame structure / strong column-weak beam / limit value of column-beam relative factor / moment magnification factor at column end

References

[1] Gong M, Yang Y, Xie Lili. Seismic damage to reinforced concrete frame buildings in Lushan M7.0 earthquake[J]. Earthquake Engineering and Earthquake Dynamics, 2013, 33(33): 20-26.

[2] Nakashima M, Becker T C, Matsumiya T, et al. A lesson from the 2011 Tohoku earthquake — The necessity for collaboration and dialog among natural scientists, engineers, social scientists, government agencies, and the general public[C]. Performance-Based Seismic Engineering: Vision for an Earthquake Resilient Society, 2014, New York, USA: Springer 101-116.

[3] Zhou W, Zheng W, Pujol S. Seismic vulnerability of reinforced concrete structures affected by the 2008 Wenchuan earthquake[J]. Bulletin of Earthquake Engineering, 2013, 11(11): 2079-2104.

[4] Lu X, Ye L, Ma Y, et al. Lessons from the collapse of typical RC frames in Xuankou School during the great Wenchuan earthquake[J]. Advances in Structural Engineering, 2012, 15(15): 139-154.

[5] Xu L, Li N, Xie Y, et al. Equivalent response estimation of structural systems subjected to long-period ground motion[J]. Transactions of Tianjin University, 2013, 19(19): 356-365.

[6] Xue Qiang. Need of performance-based earthquake engineering in Taiwan: A lesson from the Chichi earthquake[J]. Earthquake Engineering & Structural Dynamics, 2000, 29(29): 1609-1627.

[7] Arslan M H, Korkmaz H H. What is to be learned from damage and failure of reinforced concrete structures during recent earthquakes in Turkey?[J]. Engineering Failure Analysis, 2007, 14(14): 1-22.

[8] Zhou H, Xu X, Zheng F, et al. Numerical simulation of column-end damages of reinforced concrete frames caused by 2008 Wenchuan earthquake in China[J]. Advances in Structural Engineering, 2013, 16(16): 2063-2074.

[9] Wang Yayong. An overview of recent revision of seismic design codes after the 5·12 Wenchuan earthquake[J]. China Civil Engineering Journal, 2009, 42(42): 1-12.

[10] Yang H, Zhu Z, Bai Shaoliang. An evaluation of the effectiveness of the Chinese strong column weak beam measure under horizontal seismic excitations[J]. China Civil Engineering Journal, 2011, 44(44): 58-64.

[11] Franco M A D, Mitchell D, Paultre P. Role of spandrel beams on response of slab-beam-column connections[J]. Journal of Structural Engineering, 1995, 121(121): 408-419.

[12] French C W, Moehle J P. Effect of floor slab on behavior of slab-beam-column connections[J]. ACI Special Publication, 1991, 123: 225-258.

[13] Pantazopotrlou S J, Mcehle J P, Shahrooz B M. Simple analytical model for T-beams in flexure[J]. Journal of Structural Engineering, 1988, 114(114): 1507-1523.

[14] Li Y, Luo W, Han Jun. Control of failure mechanism for RC frame structure under strong earthquakes[J]. China Civil Engineering Journal, 2013, 46(46): 85-92.

[15] Ministry of Housing and Urban-Rural Development of the People’s Republic of China. GB 50011-2010 Code for Seismic Design of Buildings[S]. China Architecture & Building Press, Beijing, China, 2010(in Chinese).

[16] Dooley K L, Bracci J M. Seismic evaluation of column-tobeam strength ratios in reinforced concrete frames[J]. ACI Structural Journal, 2001, 98(98): 843-851.

[17] He M, Yang C, Cai J, et al. Probabilistic evaluation of effects of column moment magnification factor on seismic performance of reinforced concrete frames[J]. Advanced Materials Research, 2011, 243: 251-257.

[18] Ye L, Ma Q, Miao Zhiwei. Study on weak beam-strong column design method of RC frame structures[J]. Engineering Mechanics, 2010, 27(27): 102-113.

[19] Robert P, Thomas P. Reinforced Concrete Structures[M], 1975, New York, USA: Wiley.

[20] Ministry of Housing and Urban-Rural Development of the People’s Republic of China. GB 50010-2010 Code for Design of Concrete Structures[S]. China Architecture & Building Press, Beijing, China, 2010(in Chinese).