Locomotive design is a highly complex task that requires the use of systems engineering that depends upon knowledge from a range of disciplines and is strongly oriented on how to design and manage complex systems that operate under a wide range of different train operational conditions on various types of tracks. Considering that field investigation programs for locomotive operational scenarios involve high costs and cause disruption of train operations on real railway networks and given recent developments in the rollingstock compliance standards in Australia and overseas that allow the assessment of some aspects of rail vehicle behaviour through computer simulations, a great number of multidisciplinary research studies have been performed and these can contribute to further improvement of a locomotive design technique by increasing the amount of computer-based studies. This paper was focused on the presentation of the all-important key components required for locomotive studies, starting from developing a realistic locomotive design model, its validation and further applications for train studies. The integration of all engineering disciplines is achieved by means of advanced simulation approaches that can incorporate existing AC and DC locomotive designs, hybrid locomotive designs, full locomotive traction system models, rail friction processes, the application of simplified and exact wheel-rail contact theories, wheel-rail wear and rolling contact fatigue, train dynamic behaviour and in-train forces, comprehensive track infrastructure details, and the use of co-simulation and parallel computing. The co-simulation and parallel computing approaches that have been implemented on Central Queensland University’s High-Performance Computing cluster for locomotive studies will be presented. The confidence in these approaches is based on specific validation procedures that include a locomotive model acceptance procedure and field test data. The problems and limitations presented in locomotive traction studies in the way they are conducted at the present time are summarised and discussed.

Mud pumping induced by moving train loads on rainwater-intruded roadbed causes intensive track vibrations and threatens safety of high-speed trains. In this paper, a vehicle–track–subgrade finite element model was established to analyze the dynamic responses of a ballastless track, and results showed that the concrete base and roadbed were detached because of the whipping effect arising from the rainwater intrusion channel. An in-situ soil core test showed that the intruded rainwater accumulated in roadbed to form standing water and saturated the roadbed. The flapping action of the concrete base caused by the whipping effect led to mud formation mixed with fine particles and rainwater, which migrated upward under the pore-water pressure (PWP) gradient. Mud pumping resulted from continuous particle migration in the saturated roadbed under moving train loads: under normal roadbed condition, coarse and fine particles were uniformly distributed in the roadbed; in early period of mud pumping, fine particles migrated downward to bottom of the roadbed because of the rainwater infiltration flow; in middle stage of mud pumping, fine particles migrated upward and gathered at the roadbed surface under PWP gradient; in later period of mud pumping, fine particles were entrained and removed with the dissipation of excess PWP. Moreover, a full-scale physical model was established to reproduce mud pumping, and polyurethane injection remediation against mud pumping was validated on this physical model. The remediation method was applied to an in-situ mud pumping. The deviation of the vertical track profile reduced remarkably and remained at a low level within half a year, showing a good long-term service performance of the polyurethane remediated roadbed.

Given that the current ballasted tracks in Australia may not be able to support faster and significantly heavier freight trains as planned for the future, the imminent need for innovative and sustainable ballasted tracks for transport infrastructure is crucial. Over the past two decades, a number of studies have been conducted by the researchers of Transport Research Centre (TRC) at the University of Technology Sydney (UTS) to investigate the ability of recycled rubber mats, as well as waste tyre cells and granulated rubber to improve the stability of track substructure including ballast and subballast layers. This paper reviews four applications of these novel methods, including using recycled rubber products such as CWRC mixtures (i.e., mixtures of coal wash (CW) and rubber crumbs (RC)) and SEAL mixtures (i.e., mixtures of steel furnace slag, CW and RC) to replace subballast/capping materials, tyre cells reinforcements for subballast/capping layer and under ballast mats; and investigates the energy dissipation capacity for each application based on small-scale cyclic triaxial tests and large-scale track model tests. It has been found that the inclusion of these rubber products increases the energy dissipation effect of the track, hence reducing the ballast degradation efficiently and increasing the track stability. Moreover, a rheological model is also proposed to investigate the effect of different rubber inclusions on their efficiency to reduce the transient motion of rail track under dynamic loading. The outcomes elucidated in this paper will lead to a better understanding of the performance of ballast tracks upgraded with resilient rubber products, while promoting environmentally sustainable and more affordable ballasted tracks for greater passenger comfort and increased safety.

The type of subgrade of a railroad foundation is vital to the overall performance of the track structure. With the train speed and tonnage increase, as well as environmental changes, the evaluation and influence of subgrade are even more paramount in the railroad track structure performance. A geomechanics classification for subgrade is proposed coupling the stiffness (resilient modulus) and permanent deformation behaviour evaluated by means of repeated triaxial loading tests. This classification covers from fine- to coarse-grained soils, grouped by UIC and ASTM. For this achievement, we first summarize the main models for estimating resilient modulus and permanent deformation, including the evaluation of their robustness and their sensitivity to mechanical and environmental parameters. This is followed by the procedure required to arrive at the geomechanical classification and rating, as well as a discussion of the influence of environmental factors. This work is the first attempt to obtain a new geomechanical classification that can be a useful tool in the evaluation and modelling of the foundation of railway structures.

By modifying friction to the desired level, the application of friction modifiers (FMs) has been considered as a promising emerging tool in the railway engineering for increasing braking/traction force in poor adhesion conditions and mitigating wheel/rail interface deterioration, energy consumption, vibration and noise. Understanding the effectiveness of FMs in wheel–rail dynamic interactions is crucial to their proper applications in practice, which has, however, not been well explained. This study experimentally investigates the effects of two types of top-of-rail FM, i.e. FM-A and FM-B, and their application dosages on wheel–rail dynamic interactions with a range of angles of attack (AoAs) using an innovative well-controlled V-track test rig. The tested FMs have been used to provide intermediate friction for wear and noise reduction. The effectiveness of the FMs is assessed in terms of the wheel–rail adhesion characteristics and friction rolling induced axle box acceleration (ABA). This study provides the following new insights into the study of FM: the applications of the tested FMs can both reduce the wheel–rail adhesion level and change the negative friction characteristic to positive; stick–slip can be generated in the V-Track and eliminated by FM-A but intensified by FM-B, depending on the dosage of the FMs applied; the negative friction characteristic is not a must for stick–slip; the increase in ABA with AoA is insignificant until stick–slip occurs and the ABA can thus be influenced by the applications of FM.

In recent years, high-speed railways in China have developed very rapidly, and the number and span of the railway bridges are keeping increasing. Meanwhile, frequent extreme disasters, such as strong winds, earthquakes and floods, pose a significant threat to the safety of the train–bridge systems. Therefore, it is of paramount importance to evaluate the safety and comfort of trains when crossing a bridge under external excitations. In these aspects, there is abundant research but lacks a literature review. Therefore, this paper provides a comprehensive state-of-the-art review of research works on train–bridge systems under external excitations, which includes crosswinds, waves, collision loads and seismic loads. The characteristics of external excitations, the models of the train–bridge systems under external excitations, and the representative research results are summarized and analyzed. Finally, some suggestions for further research of the coupling vibration of train–bridge system under external excitations are presented.