An approach to control the profiles of interstory drift ratios along the height of building structures via topology optimization is proposed herein. The theoretical foundation of the proposed approach involves solving a min–max optimization problem to suppress the maximum interstory drift ratio among all stories. Two formulations are suggested: one inherits the bound formulation and the other utilizes a p-norm function to aggregate all individual interstory drift ratios. The proposed methodology can shape the interstory drift ratio profiles into inverted triangular or quadratic patterns because it realizes profile control using a group of shape weight coefficients. The proposed formulations are validated via a series of numerical examples. The disparity between the two formulations is clear. The optimization results show the optimal structural features for controlling the interstory drift ratios under different requirements.
In this study, the mechanical properties of the composite plate were considered Gaussian random fields and their effects on the buckling load and corresponding mode shapes were studied by developing a semi-analytical non-intrusive approach. The random fields were decomposed by the Karhunen−Loève method. The strains were defined based on the assumptions of the first-order and higher-order shear-deformation theories. Stochastic equations of motion were extracted using Euler–Lagrange equations. The probabilistic response space was obtained by employing the non-intrusive polynomial chaos method. Finally, the effect of spatially varying stochastic properties on the critical load of the plate and the irregularity of buckling mode shapes and their sequences were studied for the first time. Our findings showed that different shear deformation plate theories could significantly influence the reliability of thicker plates under compressive loading. It is suggested that a linear relationship exists between the mechanical properties’ variation coefficient and critical loads’ variation coefficient. Also, in modeling the plate properties as random fields, a significant stochastic irregularity is obtained in buckling mode shapes, which is crucial in practical applications.
Blasting engineering in complex urban environments is considered to influence the safety and stability of the overlying drainage box culvert structure owing to vibration. Therefore, field blasting and vibration tests were performed on the blasting engineering of the Wuhan Metro Line 8 connected aisle, and the LS-DYNA software was used to analyze the dynamic response characteristics of an underground drainage box culvert during the blasting test. The vibration response evolution law of the buried drainage box culvert under blasting vibration was investigated, and a safe surface control standard for the blast vibration of a drainage box culvert is proposed. The results reveal that the maximum tensile stress of the box culvert structure was 0.33 MPa. The peak particle velocity (PPV) and peak tensile stress (PTS) of the drainage box culvert decreased as the water level in the box culvert increased. Based on the relationship between the tensile stress of the box culvert, PPV of the box culvert, and PPV of the surface, it is proposed that the surface control velocity of the buried drainage box culvert is 1.36 cm/s.
The objective of the current study is to propose an expert system framework based on a supervised machine learning technique (MLT) to predict the seismic performance of low- to mid-rise frame structures considering soil-structure interaction (SSI). The methodology of the framework is based on examining different MLTs to obtain the highest possible accuracy for prediction. Within the MLT, a sensitivity analysis was conducted on the main SSI parameters to select the most effective input parameters. Multiple limit state criteria were used for the seismic evaluation within the process. A new global seismic assessment ratio was introduced that considers both serviceability and strength aspects by utilizing three different engineering demand parameters (EDPs). The proposed framework is novel because it enables the designer to seismically assess the structure, while simultaneously considering different EDPs and multiple limit states. Moreover, the framework provides recommendations for building component design based on the newly introduced global seismic assessment ratio, which considers different levels of seismic hazards. The proposed framework was validated through comparison using non-linear time history (NLTH) analysis. The results show that the proposed framework provides more accurate results than conventional methods. Finally, the generalization potential of the proposed framework was tested by investigating two different types of structural irregularities, namely, stiffness and mass irregularities. The results from the framework were in good agreement with the NLTH analysis results for the selected case studies, and peak ground acceleration (PGA) was found to be the most influential input parameter in the assessment process for the case study models investigated. The proposed framework shows high generalization potential for low- to mid-rise structures.
The horizontal bearing behavior of a single batter pile (SBP) is vital to its application in practical engineering; however, the horizontal responses of SBPs change with the directions of horizontal loads, and this phenomenon is rarely investigated. Therefore, the directional differences in the horizontal bearing behaviors of SBPs are investigated in this study. Four model tests are conducted to preliminarily examine the effects of the skew angle of horizontal loads on the horizontal bearing capacities and distributions of the bending moments of the SBPs. Subsequently, the differences in the responses of the SBPs under horizontal loads in various directions at full scale are analyzed comprehensively via finite-element (FE) analysis. The effects of the skew angle on SBP-soil interaction are discussed. Moreover, an empirical design method is proposed based on the FE analysis results to predict the bearing ratios of SBPs in medium-dense and dense sand while considering the effects of the skew angle, batter angle, and pile diameter. The method is confirmed to be effective, as confirmed by the close agreement between the predicting results with the model test (reported in this study) and centrifuge model test results (reported in the literature).
Clear asphalt (CA) currently used in light-colored asphalt mixtures (LCAM) exhibits poor transparency and adhesion. Therefore, a highly transparent CA (HCA) modified using a silane coupling agent (KH550) was prepared. Furthermore, LCAM was prepared by mixing CA and limestone aggregates. The properties of the HCA and ordinary CA (OCA) were characterized using conventional asphalt tests, optical tests, pull-off tests, ultraviolet aging tests, dynamic shear rheometry, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy. Whereas Marshall, moisture resistance, wheel tracking, trabecular bending, and British pendulum tests were employed for the LCAM. The transmittance and spectral reflectance of the HCA were 123.30 and 3.74 times greater than those of the OCA, respectively. The complex modulus and viscosity-aging index of the HCA were 48% and 53% less than those of the OCA, respectively. After modification with KH550, the Marshall stability ratio, tensile strength ratio, and flexural strain of the HCA-prepared LCAM increased by 12.92%, 25.06%, and 23.90%, respectively. However, the rutting resistance of the HCA-prepared LCAM was 14.3% less than that of the OCA-prepared LCAM. The comprehensive performances of the HCA and HCA-prepared LCAM were 49.2% and 10.3% greater than those of the OCA and OCA-prepared LCAM, respectively, indicating a high application value in the future.
The curing temperature-dependent cement hydration causes the nonlinear evolution of fracture behavior and properties of fiber-reinforced cemented paste backfill (CPB) and thus influences the stability of mine backfill materials in deep mines. Therefore, the coupled effect of curing temperature (20, 35, and 45 °C) and cement hydration at different curing times (3, 7, and 28 d) on the mode-I and mode-II fracture behavior and properties of fiber-reinforced CPB is investigated. A comprehensive experimental testing program consisting of semicircular bend tests, direct shear tests, measurement of volumetric water content and matric suction, TG/DTG tests, and SEM observation is carried out. The results show that the coupled thermochemical effect results in strongly nonlinear development of pre- and post-peak behavior of fiber-reinforced CPB. Moreover, the results discover a positive linear correlation between fracture toughness and shear strength parameters and also reveal the vital role played by matric suction in the formation of fracture toughness. Furthermore, predictive functions are developed to estimate the coupled thermochemical effect on the development of KIc and KIIc. Therefore, the findings and the developed mathematical tools have the potential to promote the successful application of fiber-reinforced CPB technology in deep underground mines.
Textile reinforced mortar is widely used as an overlay for the repair, rehabilitation, and retrofitting of concrete structures. Recently, textile reinforced concrete has been identified as a suitable lining material for improving the durability of existing concrete structures. In this study, we developed a textile-reinforced mortar mix using river sand and evaluated the different characteristics of the textile-reinforced mortar under various exposure conditions. Studies were carried out in two phases. In the first phase, the pullout strength, temperature resistance, water absorption, and compressive and bending strength values of three different textile-reinforced mortar mixes with a single type of textile reinforcement were investigated. In the second phase, the chemical resistance of the mix that showed the best performance in the abovementioned tests was examined for use as an overlay for a concrete substrate. Investigations were performed on three different thicknesses of the textile reinforced mortar overlaid on concrete specimens that were subjected to acidic and alkaline environments. The flexural responses and degradations of the textile reinforced mortar overlaid specimens were examined by performing bending tests. The experimental findings indicated the feasibility of using textile reinforced mortar as an overlay for durable concrete construction practices.
Fiber-reinforced self-compacting concrete (FRSCC) is a typical construction material, and its compressive strength (CS) is a critical mechanical property that must be adequately determined. In the machine learning (ML) approach to estimating the CS of FRSCC, the current research gaps include the limitations of samples in databases, the applicability constraints of models owing to limited mixture components, and the possibility of applying recently proposed models. This study developed different ML models for predicting the CS of FRSCC to address these limitations. Artificial neural network, random forest, and categorical gradient boosting (CatBoost) models were optimized to derive the best predictive model with the aid of a 10-fold cross-validation technique. A database of 381 samples was created, representing the most significant FRSCC dataset compared with previous studies, and it was used for model development. The findings indicated that CatBoost outperformed the other two models with excellent predictive abilities (root mean square error of 2.639 MPa, mean absolute error of 1.669 MPa, and coefficient of determination of 0.986 for the test dataset). Finally, a sensitivity analysis using a partial dependence plot was conducted to obtain a thorough understanding of the effect of each input variable on the predicted CS of FRSCC. The results showed that the cement content, testing age, and superplasticizer content are the most critical factors affecting the CS.
This paper numerically studied the effect of uncertainty and random distribution of concrete strength in beams failing in shear and flexure using lattice modeling, which is suitable for statistical analysis. The independent variables of this study included the level of strength reduction and the number of members with reduced strength. Three levels of material deficiency (i.e., 10%, 20%, 30%) were randomly introduced to 5%, 10%, 15%, and 20% of members. To provide a database and reliable results, 1000 analyses were carried out (a total of 24000 analyses) using the MATLAB software for each combination. Comparative studies were conducted for both shear- and flexure-deficit beams under four-point loading and results were compared using finite element software where relevant. Capability of lattice modeling was highlighted as an efficient tool to account for uncertainty in statistical studies. Results showed that the number of deficient members had a more significant effect on beam capacity compared to the level of strength deficiency. The scatter of random load-capacities was higher in flexure (range: 0.680–0.990) than that of shear (range: 0.795–0.996). Finally, nonlinear regression relationships were established with coefficient of correlation values (R2) above 0.90, which captured the overall load–deflection response and level of load reduction.
