Fabrication of three-dimensional porous La-doped SrTiO₃ microspheres with enhanced visible light catalytic activity for Cr(VI) reduction

Abstract

In recent years, much effort has been focused on the development of the photocatalysts with high performance under visible light irradiation. In this paper, three-dimensional porous La-doped SrTiO₃ (LST) microspheres were prepared by a modified sol–gel method, in which the agarose gel/SrCO₃ microsphere and La₂O₃ were employed as the template and the La resource, respectively. The as-prepared LST microspheres exhibit a porous structure with a diameter of about 10 µm and a surface pore size of about 100 nm. The La element was doped into the crystal lattice of SrTiO₃ by the substitution of La³⁺ for Sr²⁺. Therefore, the absorption edge of LST samples shifts toward the visible light region, and their photocatalytic activity for the Cr(VI) reduction is enhanced under visible light. Among all LST samples, LST-0.5 (the La³⁺ doping content is 0.5 wt-%) exhibited the highest visible-light photocatalytic activity, which can reduce 84% Cr(VI) within 100 min. This LST materials may become a promising photocatalyst for the facile treatment of wastewater containing poisonous heavy metal ions.

Key words： SrTiO₃; La³⁺ doping; porous microsphere; visible-light photocatalysis; Cr(VI) reduction

Acknowledgements

The authors thank the financial support from the Program of Introducing Talents of Discipline to Universities (No. B06006), the National Natural Science Foundation of China (Grant Nos. 21621004 and 21406163), the Tianjin Research Program of Application Foundation and Advanced Technology (No. 15JCQNJC10000), the National Basic Research Program of China (No. 2009CB724705), and the National Science Fund for Distinguished Young Scholars (No. 21125627).

References

1 Chen X B, Liu L, Yu P Y, Mao S S. Increasing solar absorption for photocatalysis with black hydrogenated titanium dioxide nanocrystals. Science, 2011, 331(6018): 746–750

2 Nakata K, Fujishima A. TiO₂ photocatalysis: Design and applications. Journal of Photochemistry and Photobiology C, Photochemistry Reviews, 2012, 13(3): 169–189

3 Tong H, Ouyang S X, Bi Y P, Umezawa N, Oshikiri M, Ye J H. Nano-photocatalytic materials: Possibilities and challenges. Advanced Materials, 2012, 43(10): 229–251

4 Liu S Q, Yang M Q, Tang Z R, Xu Y J. A nanotree-like CdS/ZnO nanocomposite with spatially branched hierarchical structure for photocatalytic fine-chemical synthesis. Nanoscale, 2014, 6(13): 7193–7198

5 Lan Y C, Lu Y L, Ren Z F. Mini review on photocatalysis of titanium dioxide nanoparticles and their solar applications. Nano Energy, 2013, 2(5): 1031–1045

6 Li J T, Cushing S K, Bright J, Meng F K, Senty T R, Zheng P, Bristow A D, Wu N Q. Ag@Cu₂O core-shell nanoparticles as visible-light plasmonic photocatalysts. ACS Catalysis, 2013, 3(1): 47–51

7 Xu H, Ouyang S X, Liu L Q, Reunchan P, Umezawa N, Ye J H. Recent advances in TiO₂-based photocatalysis. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2014, 2(32): 12642–12661

8 Hamad S, Hernandez N C, Aziz A, Ruiz-Salvador A R, Caleroa S, Grau-Crespo R. Electronic structure of porphyrin-based metal-organic frameworks and their suitability for solar fuel production photocatalysis. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2015, 3(46): 23458–23465

9 Shi J W, Guo L J. ABO₃-based photocatalysts for water splitting. Progress in Natural Science: Materials International, 2012, 22(6): 592–615

10 Kuang Q, Yang S H. Template synthesis of single-crystal-like porous SrTiO₃ nanocube assemblies and their enhanced photocatalytic hydrogen evolution. ACS Applied Materials & Interfaces, 2013, 5(9): 3683–3690

11 Wang B, Shen S H, Guo L J. SrTiO₃ single crystals enclosed with high-indexed (023) facets and (001) facets for photocatalytic hydrogen and oxygen evolution. Applied Catalysis B: Environmental, 2015, 166-167: 320–326

12 Ouyang S, Li P, Xu H, Tong H, Liu L Q, Ye J H. Bifunctional-nanotemplate assisted synthesis of nanoporous SrTiO₃ photocatalysts toward efficient degradation of organic pollutant. ACS Applied Materials & Interfaces, 2014, 6(24): 22726–22732

13 Wang J S, Yin S, Zhang Q W, Saito F, Sato T. Mechanochemical synthesis of SrTiO_3−xF_x with high visible light photocatalytic activities for nitrogen monoxide destruction. Journal of Materials Chemistry, 2003, 13(9): 2348–2352

14 Zhang Y B, Zhong L, Duan D P. Single-step hydrothermal synthesis of strontium titanate nanoparticles from crystalline anatase titanium dioxide. Ceramics International, 2015, 41(10): 13516–13524

15 Irie H, Maruyama Y, Hashimoto K. Ag⁺- and Pb²⁺-doped SrTiO₃ photocatalysts: A correlation between band structure and photocatalytic activity. Journal of Materials Chemistry. C, Materials for Optical and Electronic Devices, 2007, 111(4): 1847–1852

16 Zou J P, Zhang L Z, Luo S L, Leng L H, Luo X B, Zhang M J, Luo Y, Guo G C. Preparation and photocatalytic activities of two new Zn-doped SrTiO₃ and BaTiO₃ photocatalysts for hydrogen production from water without cocatalysts loading. International Journal of Hydrogen Energy, 2012, 37(22): 17068–17077

17 Kou J H, Gao J, Li Z S, Yu H, Zhou Y, Zou Z G. Construction of visible-light-responsive SrTiO₃ with enhanced CO₂ adsorption ability: Highly efficient photocatalysts for artificial photosynthesis. Catalysis Letters, 2015, 145(2): 640–646

18 Sukpanish P, Lertpanyapornchai B, Yokoi T, Ngamcharussrivichai C. Lanthanum-doped mesostructured strontium titanates synthesized via sol-gel combustion route using citric acid as complexing agent. Materials Chemistry and Physics, 2016, 181: 422–431

19 Marshall M S J, Newell D T, Payne D J, Egdell R G, Castell M R. Atomic and electronic surface structures of dopants in oxides: STM and XPS of Nb- and La-doped SrTiO₃ (001). Physical Review B: Condensed Matter and Materials Physics, 2011, 83(3): 035410

20 Wang J S, Yin S, Komats M, Zhang Q W, Saito F, Sato T. Preparation and characterization of nitrogen doped SrTiO₃ photocatalyst. Journal of Photochemistry and Photobiology A Chemistry, 2004, 165(1): 149–156

21 Wang J S, Yin S, Komatsu M, Zhang Q W, Saito F, Sato T. Photo-oxidation properties of nitrogen doped SrTiO₃ made by mechanical activation. Applied Catalysis B: Environmental, 2004, 52(1): 11–21

22 Ohno T, Tsubota T, Nakamura Y, Sayama K. Preparation of S, C cation-codoped SrTiO₃ and its photocatalytic activity under visible light. Applied Catalysis A, General, 2005, 288(1-2): 74–79

23 Puangpetch T, Sommakettarin P, Chavadej S, Sreethawong T. Hydrogen production from water splitting over Eosin Y-sensitized mesoporous-assembled perovskite titanate nanocrystal photocatalysts under visible light irradiation. International Journal of Hydrogen Energy, 2010, 35(22): 12428–12442

24 Townsend T K, Browning N D, Osterloh F E. Nanoscale strontium titanate photocatalysts for overall water splitting. ACS Nano, 2012, 6(8): 7420–7426

25 Xue C, An H, Yan X Q, Li J L, Yang B L, Wei J, Yang G D. Spatial charge separation and transfer in ultrathin CdIn₂S₄/rGO nanosheet arrays decorated by ZnS quantum dots for efficient visible-light-driven hydrogen evolution. Nano Energy, 2017, 39: 513–523

26 Lin B, Li H, An H, Hao W B, Wei J, Dai Y Z, Ma C S, Yang G D. Preparation of 2D/2D g-C₃N₄ nanosheet@ZnIn₂S₄ nanoleaf heterojunctions with well-designed high-speed charge transfer nanochannels towards high efficiency photocatalytic hydrogen evolution. Applied Catalysis B: Environmental, 2018, 220: 542–552

27 Xue C, Yan X Q, An H, Li H, Wei J, Yang G D. Bonding CdS-Sn₂S₃ eutectic clusters on graphene nanosheets with unusually photoreaction-driven structural reconfiguration effect for excellent H₂ evolution and Cr(VI) reduction. Applied Catalysis B: Environmental, 2018, 222: 157–166

28 Kanhere P, Chen Z. A review on visible light active perovskite-based photocatalysts. Molecules (Basel, Switzerland), 2014, 19(12): 19995–20022

29 Schultz A M, Brown T D, Ohodnicki P R. Optical and chemi-resistive sensing in extreme environments: La-doped SrTiO₃ films for hydrogen sensing at high temperatures. Journal of Materials Chemistry. C, Materials for Optical and Electronic Devices, 2015, 119(11): 6211–6220

30 Miyauchi M, Takashio M, Tobimatsu H. Photocatalytic activity of SrTiO₃ codoped with nitrogen and lanthanum under visible light illumination. Langmuir, 2004, 20(1): 232–236

31 Lin B, Yang G D, Yang B L, Zhao Y X. Construction of novel three dimensionally ordered macroporous carbon nitride for highly efficient photocatalytic activity. Applied Catalysis B: Environmental, 2016, 198(3): 276–285

32 Lin B, An H, Yan X Q, Zhang T X, Wei J J, Yang G D. Fish-scale structured g-C₃N₄ nanosheet with unusual spatial electron transfer property for high-efficiency photocatalytic hydrogen evolution. Applied Catalysis B: Environmental, 2017, 210: 173–183

33 Pan J H, Cai Z C, Yu Y, Zhao X S. Controllable synthesis of mesoporous F-TiO₂ spheres for effective photocatalysis. Journal of Materials Chemistry, 2011, 21(30): 11430–11438

34 Pan J H, Zhang X, Du Alan J, Sun D D, Leckie J O. Self-etching reconstruction of hierarchically mesoporous F-TiO₂ hollow microspherical photocatalyst for concurrent membrane water purifications. Journal of the American Chemical Society, 2008, 130(34): 11256–11257

35 Huang Y, Gao Y X, Zhang Q, Cao J J, Huang R J, Ho W K, Lee S C. Hierarchical porous ZnWO₄ microspheres synthesized by ultrasonic spray pyrolysis: Characterization, mechanistic and photocatalytic NO_x removal studies. Applied Catalysis A, General, 2016, 515: 170–178

36 Yang D, Sun Y Y, Tong Z W, Nan Y H, Jiang Z Y. Fabrication of bimodal-pore SrTiO₃ microspheres with excellent photocatalytic performance for Cr(VI) reduction under simulated sunlight. Journal of Hazardous Materials, 2016, 312: 45–54

37 Shi L, Wang T, Zhang H B, Chang K, Meng X G, Liu H M, Ye J H. An amine-functionalized iron(III) metal-organic framework as efficient visible-light photocatalyst for Cr(VI) reduction. Advancement of Science, 2015, 2(3): 1500006

38 Zheng Z K, Huang B B, Qin X Y, Zhang X Y, Dai Y, Jiang M H, Wang P, Whangbo M H. Highly efficient photocatalyst: TiO₂ microspheres produced from TiO₂ nanosheets with a high percentage of reactive (001) facets. Chemistry (Weinheim an der Bergstrasse, Germany), 2009, 15(46): 12576–12579

39 Qin Y, Wang G Y, Wang Y J. Study on the photocatalytic property of La-doped CoO/SrTiO₃ for water decomposition to hydrogen. Catalysis Communications, 2007, 8(6): 926–930

40 Chen X, Cheng J P, Shou Q L, Liu F, Zhang X B. Effect of calcination temperature on the porous structure of cobalt oxide micro-flowers. CrystEngComm, 2012, 14(4): 1271–1276

41 Pan J H, Shen C, Ivanova I, Zhou N, Wang X Z, Tan W C, Xu Q H, Bahnemann D W, Wang Q. Self-template synthesis of porous perovskite titanate solid and hollow submicrospheres for photocatalytic oxygen evolution and mesoscopic solar cells. ACS Applied Materials & Interfaces, 2015, 7(27): 14859–14869

42 Li H Q, Cui Y M, Wu X C, Hong W S, Hua L. Effect of La contents on the structure and photocatalytic activity of La-SrTiO₃ catalysts.Chinese Journal of Inorganic Chemistry, 2012, 28(12): 2597–2604

43 Zhang J Y, Zhao Z Y, Wang X Y, Yu T, Guan J, Yu Z T, Li Z S, Zou Z G. Increasing the oxygen vacancy density on the TiO₂ surface by La-doping for dye-sensitized solar cells. Journal of Physical Chemistry C, 2010, 114(43): 18396–18400

44 Yao S H, Jia X Y, Jiao L L, Zhu C, Shi Z L. La-doped TiO₂ hollow fibers and their photocatalytic activity under UV and visible light. Indian Journal of Chemistry, 2012, 51(8): 1049–1056

45 Marina O A, Canfield N L, Stevenson J W. Thermal, electrical, and electrocatalytical properties of lanthanum-doped strontium titanate. Solid State Ionics, 2002, 149(1): 21–28

46 Zhou X, Zhang X N, Feng X B, Zhou J, Zhou S Q. Preparation of a La/N co-doped TiO₂ film electrode with visible light response and its photoelectrocatalytic activity on a Ni substrate. Dyes and Pigments, 2016, 125(12): 375–383

47 Zhang Y, Zhao Z Y, Chen J R, Cheng L, Chang J, Sheng W C, Hu C Y, Cao S S. C-doped hollow TiO₂ spheres: In situ synthesis, controlled shell thickness, and superior visible-light photocatalytic activity. Applied Catalysis B: Environmental, 2015, 165: 715–722

48 Ng J W, Xu S P, Zhang X W, Yang H Y, Sun D D. Hybridized nanowires and cubes: A novel architecture of a heterojunctioned TiO₂/SrTiO₃ thin film for efficient water splitting. Advanced Functional Materials, 2010, 20(24): 4287–4294

49 Wang C D, Qiu H, Inoue T, Yao Q W. Highly active SrTiO₃ for visible light photocatalysis: A first-principles prediction. Solid State Communications, 2014, 181(3): 5–8

50 Wang A, Shen S, Zhao Y, Wu W. Preparation and characterizations of BiVO₄/reduced graphene oxide nanocomposites with higher visible light reduction activities. Journal of Colloid and Interface Science, 2015, 445: 330–336

51 Chen X, Ta P F, Zhou B H, Dong H G, Pan J, Xiong X. A green and facile strategy for preparation of novel and stable Cr-doped SrTiO₃/g-C₃N₄ hybrid nanocomposites with enhanced visible light photocatalytic activity. Journal of Alloys and Compounds, 2015, 647(2): 456–462

52 Qiu B C, Zhong C C, Xing M Y, Zhang J L. Facile preparation of C-modified TiO₂ supported on MCF for high visible-light-driven photocatalysis. RSC Advances, 2015, 5(23): 17802–17808