The article describes the evaluation of bacteriological contamination of hot water systems by Legionella in buildings of various types with hot water temperature of 45-54 °C that conducive to proliferation of Legionella; and filtration methods of hot water systems. Methods to prevent Legionella active propagation are described. The data on the monitoring of concentrations of Legionella using filters of different types of hot water systems are presented.

The article discusses the possibility of local and deep wastewater treatment on an automobile plant. Experimental studies using flocculants, coagulants extracted from waste and biotesting of wastewater were carried out.

Questions on optimal control of the cultivation of phototrophic microorganisms, particularly microalgae, are currently relevant as for solving the problem of disposing of excess carbon dioxide emitted into the atmosphere by burning fossil fuels as for production of biofuels on the basis of phototrophic biomass.

The authors studied the contact angles of polymer compositions with a different content of a woodflour. It has been established that with increasing of concentrations of woodflour in the polymer composition, the contact angle decreases substantially, i.e. increases the hydrophilicity of the sprinkler which leads to slow movement of the water film, increasing its ability to spread. The results can be applied to improve the efficiency of cooling towers.

The paper considers approaches to monitoring the quality of teaching. A list of existing classification algorithms is presented. The authors introduce the term of dynamic cluster quality assessment.

This article discusses content recommender systems which solve the top-N problem. A mathematical model of the content recommender system based on fuzzy sets, the criterion of assessing the quality of recommendations and solution algorithm are presented in the article.

The article describes the main ecotoxicological characteristics of petroleum solvent КВЛ (KVL) and alternative: Solvon K-4 and silicone D 5, currently used in dry cleaning of clothes. Solvent Solvon K-4 has the greatest toxicity in phytotest.

The possibility of experimental treatment and post-treatment of oil products is considered to implement on wastewaters of gas stations of Vyazma and Troitsk cities. The authors developed the technological line of treatment, conducted biotesting of wastewater and research using bubble flotation, AU AG-3 (АУ АГ-3), zeolite and nonwovens.

The authors developed and tested an installation for selection of an optimal setting of durations of light and dark periods in studies of superposition (two-frequency intermittent) mode of illumination on the growth of phototrophic microorganisms.

The paper presents experimental data on cleaning of washing effluent stream by coagulants of a new generation and developed resource-saving technology of cleaning with economy of detergents.

During exploitation of refrigeration equipment, cryosediment of water ice is formed at its working elements which are have no insulation and immersed in an aqueous medium. Calculation of heat transfer in this case helps to find cryosediment’s thickness at time τ. In this article, a comparison between dynamics of the freezing of the ice on a flat surface and the surface of the hollow tube is presented.

This article is the first part of the work devoted to plasma-chemical processing of plastic waste and other toxic organic compounds into hydrogen and other marketable products. The paper demonstrates the extent of global environmental and energy problems of today. Environmental problem is connected with environmental pollution by polymer waste. Energy problem is the use of fossil fuels for energy production and the concentration of power to ensure the effectiveness of the global power systems which do not guarantee sustainable energy development in the long term and doesn’t provide the energy security of the country. The second part is devoted to the selection of the most effective ways to address these global challenges of our time. The third part is devoted to a review of experimental and theoretical work on the study and application of various types of plasma-chemical technology. On its basis, the most effective scheme of the reactor for plasma-chemical processing of plastic waste into hydrogen and other marketable products was chosen.

This article is the first part of the work devoted to plasma-chemical processing of plastic waste and other toxic organic compounds into hydrogen and other marketable products. It considers the choosing the most effective method of processing of plastic waste into hydrogen and other marketable products. The expediency of the application of plasma-chemical technologies, that meet the basic criteria of promising technologies, such as environmental and energy management, is shown.

The article considers the way for improving efficiency of collection of drops suspended in steam with use of the effect of condensation on the surface of the tube bundle.

The paper presents the results of development of the structure and content of informational support system for unique research objects of higher education institutions as a key element in ensuring of quality of research and development activity.

The main question in the article is the poor state of modern sewer systems. The author analyzes modern approaches to the design, construction, reconstruction and maintenance of sewage systems. A complex approach to solving this problem is to use information technologies to solve not separated tasks, but complex sewage system as a whole, which includes sewage networks, pumping stations, wastewater treatment plants. In the article there are the examples of software systems, which are used in the industry today.

The paper presents the method and algorithm of computer analysis of heat losses in high-temperature furnaces, allowing to optimize the design and materials of lining from the point of view of energy and resources. The authors provide information about the software and the results of the proposed method and results of calculation of a variant of furnace with false housing.

The paper considers compound structure of composites based on secondary polymers and cellulose containing waste (TetraPak-packing type), analyze of sorption of the derived materials and their use for control of oil spills in accidents. The authors discuss the prospects and opportunities of thermochemical conversion of package and developed sorbents after their use for accumulation of oil and petroleum products.

Based on the CALS concept the authors developed a computer system for quality management of road impregnation, the architecture of the composition and method of preparation impregnation with appropriate indicators of quality. The systematization of quality indicators is held on the basis of proposed informational clusters. The most advanced methods of analysis and analytical equipment were introduced into the system architecture by each indicator.

CALS concept became a base for development of the system for production of tetrachloromethane of various qualifications. The paper shows the structure of the database and interconnection of its components in addition to the chosen subject area - “High purity substances”. The authors considered development of the process regulation for tetrachloromethane by the means of CALS-system.

The article presents the results of experimental investigations of the hydrodynamic characteristics of a regular packing of nozzle-shaped elements, the results of comparative analysis of different types of nozzles, showing that the studied nozzle has a more developed specific surface during hydraulic resistance comparable with the most common industrial nozzles.

The papers presents developments of the department "Engineering ecology of the urban economy" of Moscow State University of Mechanical Engineering (MAMI) of the methods of processing different types of waste. Non-waste gasification technology in the molten metal can process municipal waste to produce synthesis gas and electricity in a gas turbine. The technology has been standardized by type of feedstock, processing possible local fuel resources, including peat, coal, production waste, household waste and other carbon-bearing fuels. Encouraged to use the synthesis gas in cogeneration power plants and power technology complexes. Developed technology for processing and utilization of polymeric materials using new-generation catalysts by low-temperature catalytic pyrolysis. Developed technology for processing food waste to produce feed additives by bioconversion.

The paper presents developments of the department "Engineering ecology of the urban economy" of Moscow State University of Mechanical Engineering (MAMI) in biodiesel production from vegetable raw materials: heterogeneous catalysis vegetable oils (rapeseed, etc.), the transesterification of vegetable oils by supercritical methanol, waste-free loops and production of biofuels from microalgae biomass energy.

The article presents the results of studies to solve the problem of data visualization of software unit. This block is a part of the information search diagnostic system “Passportgen”. This unit provides a diagnostician with visual data on genetic relationships of diagnosed body.

Article discuses the problems of legal regulation of diseases development risk and the analysis of works on medico-biological problem of adaptation to the labour process taking into account individual features. It is shown that the universal role of endogenous bioregulators is increasing because of air pollution with nitrogen oxides. Individual possibilities of adaptation to the labour process are modulated by environmental factors.

There was conducted a study of microbial fuel cells in the industrial waste water in the flow and periodic mode.

The article describes the main objectives of carrying out of patent researches on different stages of the life cycle of scientific and technological achievements. The obtained results can be applied for all entities involved in the process of creation and commercialization of scientific and technical achievements.

The article shows the experimental results of multicyclone element (diameter 0,05 m) work. The velocity of gas, corresponding to the beginning of self-similar mode of the device, fractional efficiency of dust catching. The legitimacy of application of the obtained earlier empirical dependences for calculation of such filters is shown in the article.

This article examines possible applications of the asymptotic method of Wentzel-Kramers-Brillouin (WKB) for solution of ordinary differential equations with a small parameter at the higher derivative, to build and evaluate the solutions of a class of degenerating ordinary differential equations of second order containing a large number parameter.

The paper considers synthesis of the training system which allows to increase the efficiency of training the operators for the processes of nanostructured carbon materials production. There are shown results of the processes of fullerene soot synthesis research. On the basis of these results the model of the reactor of the fullerene soot functioning, structure of the library of the mathematical models were made. There is also developed a software simulator complex for synthesis process of fullerene soot to train operators to control the processes of production of fullerenes.

The article examines the assessment and management of security in relation to the current absence of a system of concepts and indicators for safety industrial facility. There is offered to concentrate in a single document all the valid indicators of quality and safety assessment. This document will provide the possibility of unambiguous interpretation of the results when completing the expertise and calculating risks.

The experiments on the cultivation of algae Chlorella sp. and Scenedesmus quadricauda on flasks showed that from eight commercially available water-repellent recipes to prevent the fouling of glass surfaces the most effective is to use dimethyldichlorosilane as a 5% solution in isopropanol. The procedure of processing the containers is quite simple and consisted of short-term rinsing of the specified drug and further drying under vacuum at a temperature of 100 - 110 degrees Celsius.

There were made experimental studies of the drying kinetics of porous silica gel with different initial humidity, and investigated the change in temperature of the material during this process. On the basis of experimental data the parameters of drying process with microwave energy supply, drying time to the equilibrium moisture (≤ 0,5 %), the time limit for processing without disrupting properties of silica gel, as well as temperature adsorbent at the end of the drying process were revealed.

The problem of process simulation for cultivation of phototrophic microorganisms in a chamber type photobioreactor is discussed. Comparison of the model with the observed modes in the experiment will allow to make a parametric identification of process and subsequently use it to find the optimal design parameters and modes of installation.

Thermodynamic assessment of the water equivalents cooling streams and associated energy costs in heat transfer systems were obtained. As an example, authors investigated the ability limits of energy consumption for cooling systems of supercomputers. Comparison of air systems using heat sink and cooling towers was made.

The article discusses the parametric synthesis of the optimal regulator based on the calculus of variations, provided that the mathematical model of an object is represented by a differential equation in the operator form and the left and right parts in the form of algebraic polynomials of relative variable . In the same form is submitted mathematical model of the regulator. On this basis the system of Euler-Poisson equations for extreme variational problem is obtained. After equating the coefficients of the polynomials optimal problem and polynomials obtained from the initial equations of the object and the regulator, there was obtained a given structure regulator adjustments.

The paper considers process of ultrasonic action on pollution of reverse osmosiss membrane.

Estimated available resources for the production of alternative fuels. To determine the effectiveness of possible conversion of the proposed equation of material balance, the result of which solution is the concentration of methane in the biogas is extracted. Forecast further improvement of existing structures digesters according to the degree of processing of wastes subject to a minimum of energy consumption.

The possibility of improving the parameters of the sintering process of iron ore sa charge by the joint submission of the driver and hydrocarbons.

A review of methods and instruments for determining the activity of Portland cement, analyzed their characteristics, advantages and disadvantages identified, conclusions on the use of the best method for measuring the activity.

In article the directions in reconstruction and modernization of treatment facilities are considered. Shortage of capacities, wear of the equipment and insufficient quality of cleaning thus are called as one of the main problems. The directions of reconstruction of treatment facilities are given in article, receptions and technologies of reconstruction of the constructions, developed and introduced MGSU together with PF "Komitekhs-Ekologiya" which allow not only to use effectively existing treatment facilities, most to lower costs of reconstruction, but also to achieve high extent of sewage treatment before dumping of the cleared drains in reservoirs of different function.

The research of formation of oxides of nitrogen in the plasma-chemical processes of recycling. The possibility of education beyond the equilibrium concentrations of NOx, related to the temperature profile in the channel of the plasma torch nozzle.

A system for automating the installation for biological wastewater treatment of organic contaminants in anticipation of further movement has repeatedly installation. For reasons of minimizing installation costs selected sensors and controllers, designed SCADA- system.

This article present a system for quantitative analysis of the culture medium for the content of unstable or unstable components. Described a model of the process and developed software and hardware, some recommendations to further reduce the error analysis.

The article deals with the determination of carbon (glucose, maltose) and nitrogen (NH 4NO 3, (NH 4) 2SO 4) sources which ensure the biosynthesis of protein by the producer strain in submerged culture in the most effective way. The main substrate for the technology of Fusarium sambucinum D-104 biomass production has been chosen.

In this paper analyzes the characteristics of the equipment failure probability for reprocessing waste multilayer packaging, created under the State contract № 14.527.12.0023 «Development of an integrated pilot recycling technology of production and consumption of composite laminated packaging materials. Based on the results of the controlled operation of pilot techno-logical lines and calculations of the probability density distributions of failures defined least reliable equipment and shows the possible arrangements (adjustments to the schedule planned preventative maintenance) to reduce the number of failures.