Transforming Natural Resources into Advanced Solutions: The Contribution of Clay-Based Adsorbents to Carbon Dioxide (CO₂) Adsorption

Abstract

Carbon capture and storage (CCS) is an advanced environmental technology for mitigating CO₂ emissions and addressing climate change. Among the various approaches, adsorption has emerged as a promising method for CO₂ capture due to its effectiveness and practicality. This review explores the potential of clay minerals as adsorbents for CO₂ capture, providing an in-depth analysis of their inherent properties and the mechanisms involved in adsorption process. The review begins with an introduction to CCS and the concept of adsorption, followed by a detailed examination of various clay minerals, including sepiolite, montmorillonite, bentonite, kaolinite, saponite, halloysite, and illite. Each mineral’s suitability for CO₂ adsorption is assessed, highlighting the specific properties that contribute to their performance. The mechanisms of CO₂ adsorption including physisorption, chemisorption, ion exchange, pore diffusion, intraparticle diffusion, surface complexation, and competitive adsorption are thoroughly discussed. The review also covers the modification of clay minerals through physical and chemical treatments, amine functionalization, and composite formation to enhance their CO₂ adsorption capacity. Additionally, regeneration methods such as temperature-swing adsorption (TSA), pressure-swing adsorption (PSA), and purging are discussed, along with CO₂ recovery and storage techniques for improving energy efficiency. The review concludes with an overview of characterization methods for clay-based adsorbents and potential applications, while addressing the challenges and future trends in the field. This work emphasizes the promising role of clay-based adsorbents in advancing CCS technology.

Keywords

Carbon capture and storage (CCS) / CO₂ adsorption / Clay minerals / Environmental impact / Climate change mitigation / Chemisorption

References

[1] LiuZ, DengZ, DavisSJ, et al.. Global carbon emissions in 2023. Nat Rev Earth Environ, 2024, 5(4): 253-254

[2] MiyazakiK, BowmanK. Predictability of fossil fuel CO₂ from air quality emissions. Nat Commun, 2023, 14(1): 1604

[3] PataUK, WangQ, KartalMT, et al.. The role of disaggregated renewable energy consumption on income and load capacity factor: a novel inclusive sustainable growth approach. Geosci Front, 2024, 15(1): 101693

[4] JawadiF, RozinP, BourghelleD. Insights into CO₂ emissions in Europe in the context of COVID-19: a panel data analysis. Int Econ, 2023, 173: 164-174

[5] ChenL, GozgorG, LauCKM, et al.. The impact of geopolitical risk on CO₂ emissions inequality: evidence from 38 developed and developing economies. J Environ Manag, 2024, 349: 119345

[6] AltafF, BatoolR, GillR, et al.. Synthesis and electrochemical investigations of ABPBI grafted montmorillonite based polymer electrolyte membranes for PEMFC applications. Renew Energy, 2021, 164: 709-728

[7] FilonchykM, MichaelP, PetersonH, et al.. Greenhouse gas emissions and reduction strategies for the world’s largest greenhouse gas emitters. Sci Total Environ, 2024, 9: 173895

[8] LeTH, NguyenCP. Determinants of greenhouse gas emissions revisited: a global perspective. Singap Econ Rev, 2024, 69(01): 141-167

[9] Sabir A, Altaf F, Batool R et al (2021) Agricultural waste absorbents for heavy metal removal. Green adsorbents to remove metals, dyes and boron from polluted water, 195–228

[10] BhattiUA, BhattiMA, TangH, et al.. Global production patterns: Understanding the relationship between greenhouse gas emissions, agriculture greening and climate variability. Env Res, 2024, 245: 118049

[11] AhmadA, WangZF, KhanIA, et al.. Self-sulfur doped mesoporous novel carbon electrodes derived from poly-anthraquinone sulfide for high-performance supercapacitors! a comparative study. J Energy Storage, 2024, 100: 113763

[12] HossainF, HasanMJ, SarkarMZ, et al.. Prediction of carbon capture and sequestration (CCS) technology in a 125 MW tangentially coal-fired subcritical thermal power plant for retrofitting in Bangladesh. Results Eng, 2023, 18: 101159

[13] FengY, ChenJ, LuoJ. Life cycle cost analysis of power generation from underground coal gasification with carbon capture and storage (CCS) to measure the economic feasibility. Res Policy, 2024, 92: 104996

[14] IftikharT, MajeedH, AltafF, et al.. Upcycling of the industrial waste as a sustainable source of axenic fungal strain (Aspergillus oryzae) for scale up enzymatic production with kinetic analysis and Box-Behnken design application. Z Phys Chem, 2024, 238(1): 115-131

[15] KazlouT, CherpA, JewellJ. Feasible deployment of carbon capture and storage and the requirements of climate targets. Nat Clim Change, 2024, 25: 1-9

[16] ShuDY, DeutzS, WinterBA, et al.. The role of carbon capture and storage to achieve net-zero energy systems: trade-offs between economics and the environment. Renew Sustain Energy Rev, 2023, 178: 113246

[17] KhanJ, NaseemI, BibiS, et al.. Green synthesis of silver nanoparticles (Ag-NPs) using Debregeasia salicifolia for biological applications. Mater, 2022, 16(1): 129

[18] Selin Oğuz (2023) Visualized: global CO₂ emissions through time (1950–2022). Available from: https://decarbonization.visualcapitalist.com/global-co2-emissions-through-time-1950-2022/

[19] Coskun Research Group: Research. Available from: http://www.coskunlab.com/p/research.html

[20] HashmiSAM, ChuahCY, YangE, et al.. Advances in H₂-selective metallic membranes for pre-combustion CO₂ capture: a critical review. Carbon Capture Sci Technol, 2024, 13: 100247

[21] JansenD, GazzaniM, ManzoliniG, et al.. Pre-combustion CO₂ capture. Int J Greenhouse Gas Control, 2015, 40: 167-187

[22] ArastoA, TsupariE, KärkiJ, et al.. post-combustion capture of CO₂ at an integrated steel mill–part I: technical concept analysis. Int J Greenhouse Gas Control, 2013, 16: 271-277

[23] RaganatiF, MiccioF, AmmendolaP. Adsorption of carbon dioxide for post-combustion capture: a review. Energy Fuels, 2021, 35(16): 12845-12868

[24] García-LunaS, OrtizC, CarroA, et al.. Oxygen production routes assessment for oxy-fuel combustion. Energy, 2022, 254: 124303

[25] YaoY, HeJY, ChenQ, et al.. Analysis of energy, exergy and CO₂ emissions in a fiberglass furnace with oxy-fuel combustion. Fuel, 2023, 348: 128484

[26] OzkanM, NayakSP, RuizAD, et al.. Current status and pillars of direct air capture technologies. iScience, 2022, 25(4): 103990

[27] EransM, Sanz-PérezES, HanakDP, et al.. Direct air capture: process technology, techno-economic and socio-political challenges. Energy Environ Sci, 2022, 15(4): 1360-1405

[28] SamboC, LiuN, ShaibuR, et al.. A technical review of CO₂ for enhanced oil recovery in unconventional oil reservoirs. Geoenergy Sci Eng, 2023, 221: 111185

[29] RickyEX, MwakipundaGC, NyakillaEE, et al.. A comprehensive review on CO₂ thickeners for CO₂ mobility control in enhanced oil recovery: recent advances and future outlook. J Ind Eng Chem, 2023, 126: 69-91

[30] Serna-GarcíaR, MorlinoMS, BucciL, et al.. Biological carbon capture from biogas streams: insights into Cupriavidus necator autotrophic growth and transcriptional profile. Bioresour Technol, 2024, 399: 130556

[31] SelimMM, TounsiA, GomaaH, et al.. Enhancing carbon capture efficiency in biogas upgrading: a comprehensive review on adsorbents and adsorption isotherms. AIP Adv, 2024, 14(4): 040703

[32] BashirA, AliM, PatilS, et al.. Comprehensive review of CO₂ geological storage: exploring principles, mechanisms, and prospects. Earth-Sci Rev, 2024, 249: 104672

[33] ZhangH, ArifM. A review of residual trapping capacity of subsurface systems for geological storage of CO₂: measurement techniques, meta-analysis of influencing factors, and future outlook. Earth-Sci Rev, 2024, 252: 104764

[34] HoHJ, IizukaA. Mineral carbonation using seawater for CO₂ sequestration and utilization: A review. Sep Purif Technol, 2023, 307: 122855

[35] ZhuangW, SongX, LiuM, et al.. Potential capture and conversion of CO₂ from oceanwater through mineral carbonation. Sci Total Environ, 2023, 867: 161589

[36] ChecchettoR, De AngelisMG, MinelliM. Exploring the membrane-based separation of CO₂/CO mixtures for CO₂ capture and utilisation processes: Challenges and opportunities. Sep Purif Technol, 2024, 346: 127401

[37] DaiZ, DengL. Membranes for CO₂ capture and separation: progress in research and development for industrial applications. Sep Purif Technol, 2023, 335: 126022

[38] JinB, WeiK, OuyangT, et al.. Chemical looping CO₂ capture and in-situ conversion: fundamentals, process configurations, bifunctional materials, and reaction mechanisms. Appl Energy Combust Sci, 2023, 16: 100218

[39] DouB, WuK, ZhangH, et al.. Sorption-enhanced chemical looping steam reforming of glycerol with CO₂ in-situ capture and utilization. Chem Eng J, 2023, 452: 139703

[40] AminnajiM, QureshiMF, DashtiH, et al.. CO₂ Gas hydrate for carbon capture and storage applications–Part 1. Energy, 2024, 300: 131579

[41] ZhangG, SongP, KongY, et al.. The first trial of hydrate continuous production: paving way on hydrate-based carbon capture and storage. Energy, 2023, 282: 128917

[42] AsgharianH, BaxterL, IovF, et al.. Techno-economic analysis of blue ammonia synthesis using cryogenic CO₂ capture process-a Danish case investigation. Int J Hydrogen Energy, 2024, 69: 608-618

[43] HeT, SiB, GundersenT, et al.. High ethane content enables efficient CO₂ capture from natural gas by cryogenic distillation. Sep Purif Technol, 2025, 352: 128153

[44] LiuW, JiY, HuangY, et al.. Adsorption-based post-combustion carbon capture assisted by synergetic heating and cooling. Renew Sustain Energy Rev, 2024, 191: 114141

[45] DasA, PeuSD, HossainMS, et al.. Advancements in adsorption based carbon dioxide capture technologies-a comprehensive review. Heliyon, 2023, 9: e22341

[46] SilveiraBH, CostaHK, SantosEM. Bioenergy with carbon capture and storage (BECCS) in Brazil: a review. Energies, 2023, 16(4): 2021

[47] LapT, BendersR, van der HilstF, FaaijA. BECCS as climate mitigation option in a Brazilian low carbon energy system: estimating potential and effect of gigatonne scale CO₂ storage. Int J Greenhouse Gas Control, 2023, 128: 103945

[48] Goddard A (2023) Deal or no deal: will the US inflation reduction Act (IRA) push carbon capture and storage (CCS) and carbon dioxide removal (CDR) technologies over the line? (Vol. 05): OIES Paper: CM

[49] MonMT, TansuchatR, YamakaW. CCUS technology and carbon emissions: evidence from the United States. Energies, 2024, 17(7): 1748

[50] Lou J, Yu S, Cui RY, Miller A, Hultman NE (2024) A provincial analysis on wind and solar investment needs towards China’s carbon neutrality. Available at SSRN 4711025

[51] ChangY, GaoS, MaQ, WeiY, LiG. Techno-economic analysis of carbon capture and utilization technologies and implications for China. Renew Sustain Energy Rev, 2024, 199: 114550

[52] JiangK, AshworthP, ZhangS, LiangX, SunY, AngusD. China’s carbon capture, utilization and storage (CCUS) policy: a critical review. Renew Sustain Energy Rev, 2020, 119: 109601

[53] SovacoolBK, Del RioDF, HermanK, et al.. Reconfiguring European industry for net-zero: a qualitative review of hydrogen and carbon capture utilization and storage benefits and implementation challenges. Energy Environ Sci, 2024, 17: 3525

[54] PopielakP, Majchrzak-KucębaI, WawrzyńczakD. Climate change mitigation with CCUS-A case study with benchmarking for selected countries in adapting the European Union’s Green Deal. Int J Greenhouse Gas Control, 2024, 132: 104057

[55] Terdal RM, Steeghs N, Walter C (2022) Carbon, capture, utilization and storage CCUS: how to commercialize a business with no revenue. In: SPE Canadian Energy Technology Conference Calgary: D011S009R001

[56] Ihejirika N (2021) The role of CCUS in accelerating Canada’s transition to net-zero: Oxford Institute for Energy Studies

[57] Taylor J, Kalinowski A, Feitz A (2022) CCUS in Australia. In: Proceedings of the 16th greenhouse gas control technologies conference (GHGT-16), Australia: 23–24

[58] El-KadyAH, AminMT, KhanF, El-HalwagiMM. Analysis of CO₂ pipeline regulations from a safety perspective for offshore carbon capture, utilization, and storage (CCUS). J Clean Prod, 2024, 439: 140734

[59] SinghU, VishalV, GargA. CCUS in India: bridging the gap between action and ambition. Prog Energy, 2024, 6(2): 023004

[60] PrajapatiM, ThesiaD, ThesiaV, et al.. Carbon capture, utilization, and storage (CCUS): a critical review towards carbon neutrality in India. Case Stud Chem Environ Eng, 2024, 10: 100770

[61] ShehriTA, BraunJF, HowarthN, LanzaA, LuomiM. Saudi Arabia’s climate change policy and the circular carbon economy approach. Clim Policy, 2023, 23(2): 151-167

[62] Wogan D, Carey E, Cooke D (2019) Policy pathways to meet Saudi Arabia’s contribution to the Paris agreement. King Abdullah Pet Stud Res Cent

[63] AlshuwaikhatHM, MohammedI. Sustainability matters in national development visions—evidence from Saudi Arabia’s vision for 2030. Sustainability, 2017, 9(3): 408

[64] TruongTH, LinBW, LoCH, TungCP, ChaoCW. Possible pathways for low carbon transitions: Investigating the efforts of oil companies in CCUS technologies. Energy Strategy Rev, 2024, 54: 101421

[65] FareedAG, KhojaAH, De FeliceF, et al.. Underground geological sequestration of carbon dioxide (CO₂) and its effect on possible enhanced gas and oil recovery in a fractured reservoir of Eastern Potwar Basin. Pakistan Sci Total Environ, 2023, 905: 167124

[66] SerafinJ, DziejarskiB. Activated carbons–preparation, characterization and their application in CO₂ capture: a review. Environ Sci Pollut Res, 2024, 31(28): 40008-40062

[67] SooXYD, LeeJJ, WuWY, et al.. Advancements in CO₂ capture by absorption and adsorption: a comprehensive review. J CO Util, 2024, 81: 102727

[68] WangW, WangQB, WangW. Study on the adsorption rate of anion exchange absorbents for capturing carbon dioxide in ambient air. Chem Eng Res Des, 2024, 201: 503

[69] Sabir A, Altaf F, Shafiq M (2019) Synthesis and characterization and application of chitin and chitosan-based eco-friendly polymer composites. Sustain Polym Compos Nanocompos 1365–1405

[70] SodiqA, AbdullatifY, AissaB, et al.. A review on progress made in direct air capture of CO₂. Environ Technol Innov, 2023, 29: 102991

[71] ChowdhuryS, KumarY, ShrivastavaS, et al.. A review on the recent scientific and commercial progress on the direct air capture technology to manage atmospheric CO₂ concentrations and future perspectives. Energy Fuels, 2023, 37(15): 10733-10757

[72] AllangawiA, AlzaimoorEF, ShanaahHH, et al.. Carbon capture materials in post-combustion: adsorption and absorption-based processes. C, 2023, 9(1): 17

[73] VorokhtaM, KusdhanyMIM, ŠvábováM, et al.. Hierarchically porous carbon foams coated with carbon nitride: insights into adsorbents for pre-combustion and post-combustion C CO₂ separation. Sep Purif Technol, 2024, 354: 129054

[74] LiuQ, KongY, SunZ, et al.. Facile synthesis of amine hybrid silica aerogel globule via wet casting assisted self-catalysed sol-gel process for CO₂ capture including direct air capture. J Environ Chem Eng, 2024, 12(3): 112913

[75] AltafF, BatoolR, GillR, et al.. Novel Np-carboxy benzyl chitosan/poly (vinyl alcohol/functionalized zeolite mixed matrix membranes for DMFC applications. Carbohydr Polym, 2020, 237: 116111

[76] LiM, HuangK, SchottJA, et al.. Effect of metal oxides modification on CO₂ adsorption performance over mesoporous carbon. Microporous Mesoporous Mater, 2017, 249: 34-41

[77] LigeroA, CaleroM, PérezA, et al.. Low-cost activated carbon from the pyrolysis of post-consumer plastic waste and the application in CO₂ capture. Process Saf Environ Prot, 2023, 173: 558-566

[78] IranvandiM, TahmasebpoorM, AzimiB, et al.. The novel SiO2-decorated highly robust waste-derived activated carbon with homogeneous fluidity for the CO₂ capture process. Sep Purif Technol, 2023, 306: 122625

[79] SerafinJ, DziejarskiB, VendrellX, et al.. Biomass waste fern leaves as a material for a sustainable method of activated carbon production for CO₂ capture. Biomass Bioenergy, 2023, 175: 106880

[80] BatoolR, AltafF, HameedMU, et al.. In situ chemical synthesis and characterization of PAN/clay nanocomposite for potential removal of Pb+2 ions from aqueous media. J Polym Res, 2021, 28: 1-15

[81] SharmaA, JindalJ, MittalA, et al.. Carbon materials as CO₂ adsorbents: a review. Environ Chem Lett, 2021, 19(2): 875-910

[82] MaliniK, SelvakumarD, KumarN. Activated carbon from biomass: Preparation, factors improving basicity and surface properties for enhanced CO₂ capture capacity–a review. J CO2 Util, 2023, 67: 102318

[83] YuC, QianA, LuY, et al.. Electron transfer processes associated with structural Fe in clay minerals. Crit Rev Environ Sci Technol, 2024, 54(1): 13-38

[84] TournassatC, SteefelCI, BourgIC, et al.Natural and engineered clay barriers, 2015, Netherlands, Elsevier: 6-2

[85] RückrichS, AgranatiG, GrobmanYJ. Evaluating clay characteristics for printable geo-materials: a case study of clay–sand mixes. Buildings, 2024, 14(6): 1576

[86] ShanK, YiZZ, YinXT, et al.. Mixed conductivity evaluation and sensing characteristics of limiting current oxygen sensors. Surf Interface, 2020, 21: 100762

[87] KalendovaA, KupkovaJ, UrbaskovaM, et al.. Applications of clays in nanocomposites and ceramics. Miner, 2024, 14(1): 93

[88] FulignatiP. Clay minerals in hydrothermal systems. Minerals, 2020, 10(10): 919

[89] SpearsDA. The origin of tonsteins, an overview, and links with seatearths, fireclays and fragmental clay rocks. Int J Coal Geol, 2012, 94: 22-31

[90] AltafF, AhmedS, Khan, , et al.. Advancing high-temperature PEMFCs: synthesis and characterization of poly (2, 5-benzimidazole) nanoclay/SPVC composite membranes. Energy Fuels, 2024, 11: 10234-10253

[91] LiuXY, XuDP, LiSJ, et al.. Estimating the mechanical properties of rocks and rock masses based on mineral micromechanics testing. Rock Mech Rock Eng, 2024, 57: 1-12

[92] SinghNB. Clays and clay minerals in the construction industry. Minerals, 2022, 12(3): 301

[93] Tournassat C, Vinsot A, Gaucher EC, Altmann S (2015) Chemical conditions in clay-rocks. In: Developments in clay science, Amsterdam; Elsevier 71–100

[94] BishopBA, AlamMS, FlynnSL, et al.. Rare earth element adsorption to clay minerals: mechanistic insights and implications for recovery from secondary sources. Environ Sci Technol, 2024, 16: 7217-7227

[95] KhalifaAZ, CizerÖ, PontikesY, et al.. Advances in alkali-activation of clay minerals. Cem Concr Res, 2020, 132: 106050

[96] ManshaM, AbbasN, AltafF, et al.. Nanomaterials based probes for iodide sensing: Synthesis strategies, applications, challenges, and solutions. J Mater Chem C, 2024, 12: 4947

[97] KumariN, MohanC. Basics of clay minerals and their characteristic properties. Clay Clay Miner, 2021, 24(1): 1

[98] OtunolaBO, OloladeOO. A review on the application of clay minerals as heavy metal adsorbents for remediation purposes. Environ Technol Innov, 2020, 18: 100692

[99] AhmedS, RuiW, AltafF, et al.. Nonlinear optical absorption and ultrafast carrier’s dynamics of ZrTe₂ by transient absorption (TA) spectrometer. Opt Mater, 2022, 132: 112730

[100] Manzoor S, Ali S, Mansha M et al (2024) Boosting hydrogen production via alkaline water splitting: Impact of Ag doping in Gd₂O₃ nanosheet arrays. Int J Hydrogen Energy

[101] VeldeBB, MeunierAThe origin of clay minerals in soils and weathered rocks, 2008, Berlin, Springer: 50-111

[102] AltafF, GillR, BocchettaP, et al.. Electrosynthesis and characterization of novel CNx-HMMT supported Pd nanocomposite material for methanol electro-oxidation. Energies, 2021, 14(12): 3578

[103] TaoH, QianX, ZhouY, et al.. Research progress of clay minerals in carbon dioxide capture. Renew Sustain Energy Rev, 2022, 164: 112536

[104] AhmedS, RuiW, AltafF, et al.. Ultrafast studies of ZrTe3 by transient absorption spectrometer. Materials, 2022, 15(15): 5420

[105] AbbaslouH, Martin PeinadoFJ, GhanizadehAR, et al.. Properties of sepiolite clay soil as a natural material (Iran’s sources clay). Geomechanics and Geoengineering, 2024, 19(3): 335-346

[106] Chruszcz-LipskaK. Removal of thiophenol from water using sepiolite. Minerals, 2024, 14(8): 743

[107] AhmedS, AltafF, ShamshadJ, et al.. Removal of Cu (II) from aqueous solutions by novel EDA-functionalized clay nanocomposite fabricated as nanoadsorbents. J Mater Sci, 2024, 59: 1-21

[108] AltafF, BatoolR, AhmadMA, et al.. Novel vinyl-modified sepiolite-based polymer nanocomposites: synthesis and characterization. Iranian Polymer J, 2018, 27: 413-422

[109] ZhangR, LiY, ZhangY, et al.. Energy-saving effect of low-cost and environmentally friendly sepiolite as an efficient catalyst carrier for CO₂ capture. ACS Sustainable Chem Eng, 2023, 11(11): 4353-4363

[110] LiM, BhattiAH, LiT, et al.. Tailoring sepiolite for efficient CO₂ desorption: a sustainable approach utilizing acid activation for amine regeneration optimization. Ind Eng Chem Res, 2024, 63: 9933

[111] HanF, LiuQ, LiD, OuyangJ. An emerging and high-performance sepiolite-supported Ni catalyst for low-temperature CO₂ methanation: the critical role of hydroxyl groups. J Environ Chem Eng, 2023, 11(5): 110331

[112] ZhuH, LiS, ZhangJ, et al.. A highly effective and low-cost sepiolite-based solid amine adsorbent for CO₂ capture in post-combustion. Sep Purif Technol, 2023, 306: 122627

[113] ZhangT, LiM, NingP, et al.. K₂CO₃ promoted novel Li₄SiO₄-based sorbents from sepiolite with high CO₂ capture capacity under different CO₂ partial pressures. Chem Eng J, 2020, 380: 122515

[114] SzymańskaA, KiełbasaK. Sepiolite-based adsorbents for carbon dioxide capture. Polish J Chem Technol, 2021, 23(1): 1-6

[115] AltafF, AhmedS, DastanD, et al.. Novel sepiolite reinforced emerging composite polymer electrolyte membranes for high-performance direct methanol fuel cells. Mater Today Chem, 2022, 24: 100843

[116] YuanM, GaoG, HuX, et al.. Premodified sepiolite functionalized with triethylenetetramine as an effective and inexpensive adsorbent for CO₂ capture. Ind Eng Chem Res, 2018, 57(18): 6189-6200

[117] LiuL, ChenH, ShikoE, et al.. Low-cost DETA impregnation of acid-activated sepiolite for CO₂ capture. Chem Eng J, 2018, 353: 940-948

[118] CeciliaJ, Vilarrasa-GarcíaE, CavalcanteCJr, et al.. Evaluation of two fibrous clay minerals (sepiolite and palygorskite) for CO₂ capture. J Environ Chem Eng, 2018, 6(4): 4573-4587

[119] IraniM, FanM, IsmailH, et al.. Modified nanosepiolite as an inexpensive support of tetraethylenepentamine for CO₂ sorption. Nano Energy, 2015, 11: 235-246

[120] AhmedS, AltafF, KhanSA, et al.. Probing the efficiency of PPMG-based composite electrolytes for applications of proton exchange membrane fuel cell. Trans Tianjin Univ, 2024, 30: 1-22

[121] Vilarrasa-GarcíaE, CeciliaJA, Bastos-NetoM, et al.. Microwave-assisted nitric acid treatment of sepiolite and functionalization with polyethylenimine applied to CO₂ capture and CO₂/N₂ separation. Appl Surf Sci, 2017, 410: 315-325

[122] AltafF, AhmedS, KhanSA, et al.. Advancing high-temperature PEMFCs: synthesis and characterization of poly (2, 5-benzimidazole) nanoclay/SPVC composite membranes. Energy Fuels, 2024, 38: 10234-10253

[123] ZhuH, HuangY, LiS, et al.. Enhanced CO₂ adsorption of PEHA/sepiolite adsorbent by zirconium accelerator in post-combustion. Sep Purif Technol, 2023, 323: 124395

[124] NaseemK, ZhangJ, FayyazA, et al.. Enhanced generation of hydrogen through hydrolysis of biochar-coupled magnesium: analysis of the performance of biochar-support and the effect of metallic coating on biochar. J Environ Chem Eng, 2024, 12(1): 111770

[125] OuyangJ, GuW, ZhengC, et al.. Polyethyleneimine (PEI) loaded MgO–SiO₂ nanofibers from sepiolite minerals for reusable CO₂ capture/release applications. Appl Clay Sci, 2018, 152: 267-275

[126] WuL, HeX, ZhaoY, et al.. Montmorillonite-based materials for electrochemical energy storage. Green Chem, 2024, 26(2): 678-704

[127] RaveendranG, WarK, ArnepalliD, MajiV. Modelling carbon dioxide adsorption behaviour on montmorillonite at supercritical temperatures. Adsorption, 2024, 30: 1-14

[128] GongF, HouD, XiangX, et al.. Mechanistic study of the effect of clay hydration swelling on CH₄/ CO₂ competitive adsorption. J CO2 Util, 2024, 80: 102666

[129] BangarSP, ChaudharyV, AkhilaPP, SunoojKV. Recent functionality developments in montmorillonite as a nanofiller in food packaging. Trends Food Sci Technol, 2023, 140: 104148

[130] AnsariA, GhaemiA, ShahhosseiniS. Impregnation of nanoclay montmorillonite by choline chloride-urea for selective CO₂, N₂, and O₂ adsorption: experimental and modeling. Arabian J Chem, 2024, 17(4): 105688

[131] MendelN, SîretanuD, SîretanuI, et al.. Interlayer cation-controlled adsorption of carbon dioxide in anhydrous montmorillonite clay. J Phys Chem C, 2021, 125(49): 27159-27169

[132] GrekovDI, Suzuki-MuresanT, KalinichevAG, et al.. Thermodynamic data of adsorption reveal the entry of CH₄ and CO₂ in a smectite clay interlayer. Phys Chem Chem Phys, 2020, 22(29): 16727-16733

[133] WangK, YanX, KomarneniS. CO₂ adsorption by several types of pillared montmorillonite clays. Appl Petrochem Res, 2018, 8: 173-177

[134] StanlyS, JelmyE, NairC, JohnH. Carbon dioxide adsorption studies on modified montmorillonite clay/reduced graphene oxide hybrids at low pressure. J Environ Chem Eng, 2019, 7(5): 103344

[135] GodarzianiH, Ramezanipour PenchahH, GhaemiA. Triethanolamine-modified montmorillonite clay as a new adsorbent for CO₂ capture: characterization, adsorption, and RSM modeling. J Chin Chem Soc, 2022, 69(12): 1981-1996

[136] Bø HunvikKW, LochP, WallacherD, et al.. CO₂ adsorption enhanced by tuning the layer charge in a clay mineral. Langmuir, 2021, 37(49): 14491-14499

[137] StevensL, WilliamsK, HanWY, et al.. Preparation and CO₂ adsorption of diamine modified montmorillonite via exfoliation grafting route. Chem Eng J, 2013, 215: 699-708

[138] PiresJ, JuźkówJ, PintoML. Amino acid modified montmorillonite clays as sustainable materials for carbon dioxide adsorption and separation. Colloids Surf A Physicochem Eng Aspects, 2018, 544: 105-110

[139] AtilhanM, AtilhanS, UllahR, et al.. High-pressure methane, carbon dioxide, and nitrogen adsorption on amine-impregnated porous montmorillonite nanoclays. J Chem Eng Data, 2016, 61(8): 2749-2760

[140] ZhangW, HuH, LiX, FangZ. Interplay of montmorillonite–H₂O–sc CO₂ system between mechanical behavior and adsorption: molecular dynamics. J Phys Chem C, 2015, 119(38): 21959-21968

[141] Ramezanipour PenchahH, GhaemiA, GodarzianiH. Eco-friendly CO₂ adsorbent by impregnation of diethanolamine in nanoclay montmorillonite. Environ Sci Pollut Res, 2021, 28(39): 55754-55770

[142] KhajehM, GhaemiA. Exploiting response surface methodology for experimental modeling and optimization of CO₂ adsorption onto NaOH-modified nanoclay montmorillonite. J Environ Chem Eng, 2020, 8(2): 103663

[143] NiuM, YangH, ZhangX, et al.. Amine-impregnated mesoporous silica nanotube as an emerging nanocomposite for CO₂ capture. ACS Appl Mater Interfaces, 2016, 8(27): 17312-17320

[144] SaifS, MubeenS, AbbassW, et al.. Exploring the feasibility of utilizing high plastic clays as an alternative material to bentonite clay in the production of ceramic tile: advancing towards efficient life cycle cost. Case Stud Constr Mater, 2024, 20: 03277

[145] Ortiz-RamosU, Leyva-RamosR, Mendoza-MendozaE, et al.. Modeling adsorption rate of trimethoprim, tetracycline and chlorphenamine from aqueous solutions onto natural bentonite clay. Elucidating mass transfer mechanisms. Chem Eng J, 2024, 493: 152666

[146] SqH. Bentonite clay modification and the application in low solid phase drilling fluids for marine hydrate-bearing formation. Appl Clay Sci, 2024, 250: 107285

[147] HorriN, Sanz-PérezES, ArencibiaA, et al.. Amine grafting of acid-activated bentonite for carbon dioxide capture. Appl Clay Sci, 2019, 180: 105195

[148] ElkhalifahAE, BustamMA, ShariffA, MurugesanT. Selective adsorption of CO₂ on a regenerable amine-bentonite hybrid adsorbent. Appl Clay Sci, 2015, 107: 213-219

[149] ElkhalifahAE, MaitraS, BustamMA, MurugesanT. Effects of exchanged ammonium cations on structure characteristics and CO₂ adsorption capacities of bentonite clay. Appl Clay Sci, 2013, 83: 391-398

[150] Vilarrasa-GarcíaE, CeciliaJA, AzevedoDC, CavalcanteCJr, Rodríguez-CastellónE. Evaluation of porous clay heterostructures modified with amine species as adsorbent for the CO₂ capture. Microporous Mesoporous Mater, 2017, 249: 25-33

[151] ElkhalifahAE, BustamMA, AzmiMS, MurugesanT. Carbon dioxide retention on bentonite clay adsorbents modified by mono-, di-and triethanolamine compounds. Adv Mater Res, 2014, 917: 115-122

[152] ChenC, ParkDW, AhnWS. Surface modification of a low cost bentonite for post-combustion CO₂ capture. Appl Surf Sci, 2013, 283: 699-704

[153] ChenC, ParkD-W, AhnW-S, et al.. CO₂ capture using zeolite 13X prepared from bentonite. Appl Surf Sci, 2014, 292: 63-67

[154] WangW, WangX, SongC, et al.. Sulfuric acid modified bentonite as the support of tetraethylenepentamine for CO₂ capture. Energ Fuels, 2013, 27(3): 1538-1546

[155] GhalandarzadehS, MaghoulP, GhalandarzadehA, et al.. Effect of nanoparticle-enhanced biocementation in kaolinite clay by microbially induced calcium carbonate precipitation. Constr Build Mater, 2024, 414: 134939

[156] ZainiMS, HasanM, AlmuaythirS, et al.. Experimental investigations on physico-mechanical properties of kaolinite clay soil stabilized at optimum silica fume content using clamshell ash and lime. Sci Rep, 2024, 14(1): 10995

[157] MutherT, DahaghiAK. Monte-Carlo simulations on H₂ adsorption in kaolinite nanopore in the presence of CO₂ and CH₄ gases. Fuel, 2024, 365: 131249

[158] ChenY, XieQ, YangY, et al.. Nano structure of CO₂-brine-kaolinite interface: implications for CO₂ geological sequestration. Appl Clay Sci, 2024, 254: 107391

[159] YangT, WangN, GuH. The adsorption behavior of niobium (V) on kaolin clay and kaolinite. Appl Clay Sci, 2023, 235: 106866

[160] MustaphaL, YusuffA, DimP. RSM optimization studies for cadmium ions adsorption onto pristine and acid-modified kaolinite clay. Heliyon, 2023, 9(8): e18634

[161] BahmanzadeganF, PordsariMA, GhaemiA. Improving the efficiency of 4A-zeolite synthesized from kaolin by amine functionalization for CO₂ capture. Sci Rep, 2023, 13(1): 12533

[162] ChenJ, ShangH, LingY, et al.. Microscopic mechanism of CO₂ adsorption on M²⁺ (M= Fe, Ca, Mg)-doped kaolinite (001) surface: DFT calculations. Chem Phys, 2024, 579: 112212

[163] ChenY-H, LuD-L. Amine modification on kaolinites to enhance CO₂ adsorption. J Colloid Interface Sci, 2014, 436: 47-51

[164] KangG, ZhangB, KangT, et al.. Effect of pressure and temperature on CO_2/CH₄ competitive adsorption on kaolinite by Monte Carlo simulations. Mater, 2020, 13(12): 2851

[165] AkpasiSO, IsaYM. Effect of operating variables on CO₂ adsorption capacity of activated carbon, kaolinite, and activated carbon–Kaolinite composite adsorbent. Water-Energy Nexus, 2022, 5: 21-28

[166] CeciliaJA, Vilarrasa-GarcíaE, Morales-OspinoR, et al.. Kaolinite-based zeolites synthesis and their application in CO₂ capture processes. Fuel, 2022, 320: 123953

[167] LiY, ZhuJ, HanS, et al.. Molecular dynamics simulations of CH₄/CO₂ hydrates nucleation in kaolinite particles. Appl Surf Sci, 2023, 607: 154911

[168] SchaefHT, GlezakouV-A, OwenAT, et al.. Surface condensation of CO₂ onto kaolinite. Environ Sci Technol Lett, 2014, 1(2): 142-145

[169] LiJ, LiangH, WuJ, et al.. Zinc saponite protection layer with fast zinc-ion transfer kinetics to enable highly reversible Zn anode. Chem Eng J, 2024, 484: 149503

[170] ZubkovaO, KuchinV, ToropchinaM, et al.. Potential application of saponite clay for production of drilling fluids. Int J Eng, 2024, 37(11): 2142-2149

[171] HassenJ, SilverJ. The unique structure–activity relationship of porphyrins and clay mineral systems in modern applications: a comprehensive review. Chem Biochem Eng Q, 2024, 38(2): 111-123

[172] BisioC, GattiG, BoccaleriE, et al.. Understanding physico–chemical properties of saponite synthetic clays. Microporous Mesoporous Mater, 2008, 107(1–2): 90-101

[173] CarniatoF, GattiG, BisioC. An overview of the recent synthesis and functionalization methods of saponite clay. New J Chem, 2020, 44(24): 9969-9980

[174] ŚrodońJ, CondonDJ, GolubkovaE, et al.. Ages of the Ediacaran Volyn-Brest trap volcanism, glaciations, paleosols, Podillya Ediacaran soft-bodied organisms, and the Redkino-Kotlin boundary (East European Craton) constrained by zircon single grain U-Pb dating. Precambrian Res, 2023, 386: 106962

[175] SatoK, HungerM. Carbon dioxide adsorption in open nanospaces formed by overlap of saponite clay nanosheets. Commun Chem, 2020, 3(1): 91

[176] Gray-WannellN, CubillasP, AslamZ, et al.. Morphological features of halloysite nanotubes as revealed by various microscopies. Clay Miner, 2023, 58(4): 395-407

[177] YuT, ZhangB, GuoH, et al.. Calcined nanosized tubular halloysite for the preparation of limestone calcined clay cement (LC3). Appl Clay Sci, 2023, 232: 106795

[178] YuanP, TanD, Annabi-BergayaF. Properties and applications of halloysite nanotubes: recent research advances and future prospects. Appl Clay Sci, 2015, 112: 75-93

[179] RamadassK, SinghG, LakhiKS, et al.. Halloysite nanotubes: Novel and eco-friendly adsorbents for high-pressure CO₂ capture. Microporous Mesoporous Mater, 2019, 277: 229-236

[180] RamadassK, SathishC, MariaRubanS, et al.. Carbon nanoflakes and nanotubes from halloysite nanoclays and their superior performance in CO₂ capture and energy storage. ACS Appl Mater Interfaces, 2020, 12(10): 11922-11933

[181] KimJ, RubinoI, LeeJ-Y, et al.. Application of halloysite nanotubes for carbon dioxide capture. Mater Res Express, 2016, 3(4): 045019

[182] RamadassK, SathishC, SinghG, et al.. Morphologically tunable nanoarchitectonics of mixed kaolin-halloysite derived nitrogen-doped activated nanoporous carbons for supercapacitor and CO₂ capture applications. Carbon, 2022, 192: 133-144

[183] WangJ, ZhangY, SiJ, et al.. Structural engineering of NiFe-Layered double hydroxides and halloysite composites for efficient CO₂ capture. Chem Eng J, 2023, 463: 142502

[184] LuX, LiuL, LiuH, et al.. Zeolite-X synthesized from halloysite nanotubes and its application in CO₂ capture. J Taiwan Inst Chem Eng, 2022, 133: 104281

[185] JanaS, DasS, GhoshC, et al.. Halloysite nanotubes capturing isotope selective atmospheric CO₂. Sci Rep, 2015, 5(1): 8711

[186] YanS, ZhangT, ZhangB, et al.. Differences in illite soil macropore morphology caused by Ca²⁺ and Mg²⁺ under Na⁺ presence. CATENA, 2024, 239: 107949

[187] Martínez-MartínezS, Pérez-VillarejoL, GarzónE, et al.. Influence of firing temperature on the ceramic properties of illite-chlorite-calcitic clays. Ceram Int, 2023, 49(14): 24541-24557

[188] Chopra H, Yosuf S, Baig AA (2023) Clays as green materials for drug delivery. In Encyclopedia of green materials. Singapore; Springer: 1–7

[189] ChenG, LuS, ZhangJ, et al.. Research of CO₂ and N₂ adsorption behavior in K-illite slit pores by GCMC method. Sci Rep, 2016, 6(1): 37579

[190] TianS, BaiR, DaiX, et al.. Experimental study on the adsorption properties of methane and carbon dioxide in illite, montmorillonite and calcite. J Pet Sci Eng, 2022, 219: 111144

[191] HwangJ, PiniR. Supercritical CO₂ and CH₄ uptake by illite-smectite clay minerals. Environ Sci Technol, 2019, 53(19): 11588-11596

[192] YangS, ZhangB, ZhengX, et al.. Insight into the adsorption mechanisms of CH₄, CO₂, and H₂O molecules on illite (001) surfaces: a first-principles study. Surf Interface, 2021, 23: 101039

[193] XiongJ, LiuX, LiangL, et al.. Adsorption behavior of methane on kaolinite. Ind Eng Chem Res, 2017, 56(21): 6229-6238

[194] ChenYH, LuDL. CO₂ capture by kaolinite and its adsorption mechanism. Appl Clay Sci, 2015, 104: 221-228

[195] KarS, GoeppertA, PrakashGS. Integrated CO₂ capture and conversion to formate and methanol: connecting two threads. Acc Chem Res, 2019, 52(10): 2892-2903

[196] MudoiMP, SharmaP, KhichiAS. A review of gas adsorption on shale and the influencing factors of CH₄ and CO₂ adsorption. J Pet Sci Eng, 2022, 217: 110897

[197] ZardariZH, MohshimDF, SarmadivalehM, et al.. Comprehensive review of CO₂ adsorption on shale formations: exploring widely adopted isothermal models and calculation techniques. ACS Omega, 2024, 9: 50078

[198] LvB, GuoB, ZhouZ, et al.. Mechanisms of CO₂ capture into monoethanolamine solution with different CO₂ loading during the absorption/desorption processes. Environ Sci Technol, 2015, 49(17): 10728-10735

[199] VaidyaPD, KenigEY. CO₂-alkanolamine reaction kinetics: a review of recent studies. Chem Eng Technol, 2007, 30(11): 1467-1474

[200] D’AlessandroDM, McDonaldT. Toward carbon dioxide capture using nanoporous materials. Pure Appl Chem, 2010, 83(1): 57-66

[201] SaidRB, KolleJM, EssalahK, et al.. A unified approach to CO₂–amine reaction mechanisms. ACS Omega, 2020, 5(40): 26125-26133

[202] HeZ, LiuW, HanK, et al.. Amine-modified acid-activated attapulgite as efficient and stable adsorbents for CO₂ capture from flue gas. J Chem Technol Biotechnol, 2024, 99(4): 842-851

[203] HeX, ChenY, GaoJ, et al.. Research progress and application prospects of modified clay materials for flue gas pollutants purification. Appl Clay Sci, 2024, 258: 107483

[204] PachecoM, BordonhosM, SardoM, et al.. Moisture effect on the separation of CO₂/CH₄ mixtures with amine-functionalised porous silicas. Chem Eng J, 2022, 443: 136271

[205] Gómez-PozueloG, Sanz-PérezE, ArencibiaA, et al.. CO₂ adsorption on amine-functionalized clays. Microporous Mesoporous Mater, 2019, 282: 38-47

[206] WalK, RutkowskiP, StawińskiW. Application of clay minerals and their derivatives in adsorption from gaseous phase. Appl Clay Sci, 2021, 215: 106323

[207] RezkMG, ForoozeshJ, AbdulrahmanA, et al.. CO₂ diffusion and dispersion in porous media: review of advances in experimental measurements and mathematical models. Energy Fuels, 2021, 36(1): 133-155

[208] PangJ, LiangY, MiF, et al.. Nanoscale understanding on CO₂ diffusion and adsorption in clay matrix nanopores: implications for carbon geosequestration. Environ Sci Technol, 2024, 58(46): 20401-20411

[209] Zhang B, Qian R, Jiang Y et al (2024) Building high-speed facilitated transport channels in Pebax membranes with montmorillonite for efficient CO₂/N₂ separation. Environ Technol, 1–15

[210] RaveendranG, ArnepalliD, MajiV. Effect of exchangeable cation on carbon dioxide adsorption in smectite clay. Geo-Congress, 2022, 2022: 78-88

[211] Álvarez-GutiérrezN, GilM, RubieraF, et al.. Kinetics of CO₂ adsorption on cherry stone-based carbons in CO₂/CH₄ separations. Chem Eng J, 2017, 307: 249-257

[212] KudahiSN, NoorpoorAR, MahmoodiNM. Determination and analysis of CO₂ capture kinetics and mechanisms on the novel graphene-based adsorbents. J CO2 Util, 2017, 21: 17-29

[213] DarunteLA, WaltonKS, ShollDS, et al.. CO₂ capture via adsorption in amine-functionalized sorbents. Curr Opin Chem Eng, 2016, 12: 82-90

[214] SunY, LiuX, HanZ, et al.. Molecular simulation of diffusion and competitive sorption of CH₄ and CO₂ in shale nanopores. Energy Fuels, 2022, 36(23): 14194-14203

[215] NousirS, ArusVA, ShiaoTC, et al.. Organically modified activated bentonites for the reversible capture of CO₂. Microporous Mesoporous Mater, 2019, 290: 109652

[216] KomadelP. Acid activated clays: materials in continuous demand. Appl Clay Sci, 2016, 131: 84-99

[217] LiX, LiH, ZhaoX, et al.. Amine-impregnated natural inorganic nanotubes via layer-by-layer electrostatically self-assembly approach for efficient CO₂ adsorption. Sep Purif Technol, 2024, 349: 127864

[218] BakerHM, Al-MutairyM. Preparation of modified Jordanian bentonite with cetyltrimethylammonium bromide as novel adsorbent for phosphate ion removal from synthetic and real wastewater. Desalination Water Treat, 2024, 320: 100640

[219] LouS, WangS, ZhangL, et al.. Influence of phosphomolybdate modified with quaternary ammonium salts on enhancing the flame retardancy and antibacterial characteristics of epoxy resin/aluminum diethylphosphinate composites. Polym Degrad Stab, 2024, 228: 110914

[220] WangX, XuY, OuQ, et al.. Adsorption characteristics and mechanisms of water-soluble polymers (PVP and PEG) on kaolin and montmorillonite minerals. J Hazard Mater, 2024, 466: 133592

[221] SunW, ZhaX, LuS, et al.. Linker-induced hollow MOF embedded into arginine-modified montmorillonite for efficient urea removal: adsorption behavior and mechanism analysis. Sep Purif Technol, 2025, 352: 128213

[222] KahkeshiZI, HaghighiMN, Bahri-LalehN, et al.. Effect of support type on the characteristics of polybutene polymers from C4 monomers employing supported ionic liquid/AlCl3 initiating systems. J Mol Struct, 2024, 1308: 138111

[223] BisioC, BrendléJ, CahenS, et al.. Recent advances and perspectives for intercalation layered compounds part 1: design and applications in the field of energy. Dalton Trans, 2024, 53: 14525

[224] SrivastavaP, BhattacharyyaTK, PalDK. Significance of the formation of calcium carbonate minerals in the pedogenesis and management of cracking clay soils (Vertisols) of India. Clays Clay Miner, 2002, 50(1): 111-126

[225] БapaнoвDA, BязникoвцeвCФ, MaмaeвaOГ. Clay peptization and clay swelling inhibition in the presence of carbonic acid, bicarbonate and carbonate ions and calcium ions. Bull Tomsk Polytech Univ Geo Assets Eng, 2024, 335(2): 234-245

[226] ChakrabortyA, AchariA, EswaramoorthyM, et al.. MOF–aminoclay composites for superior CO₂ capture, separation and enhanced catalytic activity in chemical fixation of CO₂. Chem Commun, 2016, 52(76): 11378-11381

[227] GhoshSK, DasTK, GangulyS, et al.. Silane functionalization of sodium montmorillonite and halloysite (HNT) nanoclays by ‘grafting to’ method to improve physico-mechanical and barrier properties of LLDPE/clay nanocomposites. Polym Bull, 2023, 80(4): 4307-4335

[228] ParkS, RyuJ, ChoHY, et al.. Halloysite nanotubes loaded with HKUST-1 for CO₂ adsorption. Colloids Surf A Physicochem Eng Asp, 2022, 651: 129750

[229] WilberforceT, BaroutajiA, SoudanB, et al.. Outlook of carbon capture technology and challenges. Sci Total Environ, 2019, 657: 56-72

[230] LiuW, LinY, JiangL, et al.. Thermodynamic exploration of two-stage vacuum-pressure swing adsorption for carbon dioxide capture. Energy, 2022, 241: 122901

[231] GholamiM, VerougstraeteB, VanoudenhovenR, et al.. Induction heating as an alternative electrified heating method for carbon capture process. Chem Eng J, 2022, 431: 133380

[232] GrandeCA, RibeiroRP, RodriguesAE. CO₂ capture from NGCC power stations using electric swing adsorption (ESA). Energy Fuels, 2009, 23(5): 2797-2803

[233] WangT, LacknerKS, WrightA. Moisture swing sorbent for carbon dioxide capture from ambient air. Environ Sci Technol, 2011, 45(15): 6670-6675

[234] CuestaAR, SongC. pH swing adsorption process for ambient carbon dioxide capture using activated carbon black adsorbents and immobilized carbonic anhydrase biocatalysts. Appl Energy, 2020, 280: 116003

[235] JiangN, ShenY, LiuB, et al.. CO₂ capture from dry flue gas by means of VPSA, TSA and TVSA. J CO2 Util, 2020, 35: 153-168

[236] LiuW, HuangY, ZhangX, et al.. Steam-assisted temperature swing adsorption for carbon capture integrated with heat pump. Case Stud Therm Eng, 2023, 49: 103233

[237] ZhuX, GeT, YangF, et al.. Design of steam-assisted temperature vacuum-swing adsorption processes for efficient CO₂ capture from ambient air. Renew Sustain Energy Rev, 2021, 137: 110651

[238] Stampi-BombelliV, van der SpekM, MazzottiM. Analysis of direct capture of CO₂ from ambient air via steam-assisted temperature–vacuum swing adsorption. Adsorption, 2020, 26(7): 1183-1197

[239] JoT, SaragoçaC, Al MohtarA, et al.. Pillared clays as cost-effective adsorbents for carbon capture by pressure swing adsorption processes in the cement industry. Ind Eng Chem Res, 2023, 62(13): 5613-5623

[240] KurodaS, NagaishiT, KameyamaM, et al.. Hydroxyl aluminium silicate clay for biohydrogen purification by pressure swing adsorption: Physical properties, adsorption isotherm, multicomponent breakthrough curve modelling, and cycle simulation. Int J Hydrogen Energy, 2018, 43(34): 16573-16588

[241] GholamiM, Van AsscheTR, DenayerJF. Temperature vacuum swing, a combined adsorption cycle for carbon capture. Curr Opin Chem Eng, 2023, 39: 100891

[242] WijesiriRP, KnowlesGP, YeasminH, et al.. Desorption process for capturing CO₂ from air with supported amine sorbent. Ind Eng Chem Res, 2019, 58(34): 15606-15618

[243] DutcherB, AdidharmaH, RadoszM. Carbon filter process for flue-gas carbon capture on carbonaceous sorbents: steam-aided vacuum swing adsorption option. Ind Eng Chem Res, 2011, 50(16): 9696-9703

[244] WuK, DengS, LiS, et al.. Preliminary experimental study on the performance of CO₂ capture prototype based on temperature swing adsorption (TSA). Carbon Capture Sci Technol, 2022, 2: 100035

[245] RaganatiF, AmmendolaP, ChironeR. On improving the CO₂ recovery efficiency of a conventional TSA process in a sound assisted fluidized bed by separating heating and purging. Sep Purif Technol, 2016, 167: 24-31

[246] FakhroleslamM, FatemiS. Comparative simulation study of PSA, VSA, and TSA processes for purification of methane from CO₂ via SAPO-34 core-shell adsorbent. Sep Sci Technol, 2016, 51(14): 2326-2338

[247] PlazaMG, RubieraF, PevidaC. Evaluating the feasibility of a TSA process based on steam stripping in combination with structured carbon adsorbents to capture CO₂ from a coal power plant. Energy Fuels, 2017, 31(9): 9760-9775

[248] TliliN, GrévillotG, VallièresC. Carbon dioxide capture and recovery by means of TSA and/or VSA. Int J Greenhouse Gas Control, 2009, 3(5): 519-527

[249] FengX, GuoH, FengX, et al.. Denitrification induced calcium carbonate precipitation by indigenous microorganisms in coal seam and its application potential in CO₂ geological storage. Fuel, 2024, 365: 131276

[250] LuS, HuC, WangX, et al.. Carbon dioxide storage in magmatic rocks: Review and perspectives. Renew Sustain Energy Rev, 2024, 202: 114728

[251] LiuSS, SongJM, LiXG, et al.. Enhancing CO₂ storage and marine carbon sink based on seawater mineral carbonation. Mar Pollut Bull, 2024, 206: 116685

[252] Leonzio G, Shah N (2024) Recent advancements and challenges in carbon capture, utilization and storage. Curr Opin Green Sustain Chem 100895

[253] MoosdorfN, RenforthP, HartmannJ. Carbon dioxide efficiency of terrestrial enhanced weathering. Environ Sci Technol, 2014, 48(9): 4809-4816

[254] IzadpanahiA, BluntMJ, KumarN, et al.. A review of carbon storage in saline aquifers: mechanisms, prerequisites, and key considerations. Fuel, 2024, 369: 131744

[255] SenR, MukherjeeS. Recent advances in microalgal carbon capture and utilization (bio-CCU) process vis-à-vis conventional carbon capture and storage (CCS) technologies. Crit Rev Environ Sci Technol, 2024, 54(24): 1777-1802

[256] RaimiKT, WolskeKS, HartPS, et al.. Exploring public perceptions of carbon capture and utilization in the US. Sustain Prod Consum, 2024, 50: 314-326

[257] MeijssenM, BecattiniV, MazzottiM. Integrated carbon capture and utilization in the cement industry: A comparative study. ACS Sustain Chem Eng, 2024, 12(7): 2709-2718

[258] SalaL, ZaryabSA, ChiesaP, et al.. Comparison and optimization of CO₂ purification units for CCS applications. Int J Greenhouse Gas Control, 2024, 136: 104193

[259] ChenL, ZhangL, GuoW, et al.. Techno-economic analysis of water-based CO₂ capture method based on adiabatic compressed air energy storage: comparison with monoethanolamine-based CO₂ capture method. J Clean Prod, 2024, 464: 142790

[260] Enab K, Alokla K, Samak A et al. (2024) Techno-economic analysis of CO₂ storage in depleted oil and gas reservoirs, saline aquifers, and EOR. In: SPE annual technical conference and exhibition, Louisiana: D021S027R00

[261] Reyes-SandovalA, GuerreroFJ, Pérez-ZárateD, et al.. Two-dimensional modeling of CO₂ storage in high heat flow areas: Insights from the Las Tres Virgenes geothermal field. Mexico Int J Greenhouse Gas Control, 2024, 133: 104079

[262] LiS, DengS, ZhaoL, et al.. Energy dissipation evaluation of temperature swing adsorption (TSA) cycle based on thermodynamic entropy insights. Sci Rep, 2019, 9(1): 16599

[263] JiangB, ZhangB, DuanX, et al.. CO₂ capture by modified clinoptilolite and its regeneration performance. Int J Coal Sci Technol, 2024, 11(1): 20

[264] ZangP, TangJ, ZhangH, et al.. Two-dimensional interfacial enhanced CO₂ adsorption performance of porous organic amine solids: structure-activity relationships and DFT calculations. Chem Eng J, 2024, 485: 149938

[265] WangZ, PangY, GuoH, et al.. Increased CO₂ capture capacity via amino-bifunctionalized halloysite nanotubes adsorbents. Fuel, 2024, 364: 131036

[266] ChouikhiN, CeciliaJA, Vilarrasa-GarcíaE, et al.. CO₂ adsorption of materials synthesized from clay minerals: a review. Minerals, 2019, 9(9): 514

[267] ReddyMSB, PonnammaD, SadasivuniKK, et al.. Carbon dioxide adsorption based on porous materials. RSC Adv, 2021, 11(21): 12658-12681

[268] WangW, XiaoJ, WeiX, et al.. Development of a new clay supported polyethylenimine composite for CO₂ capture. Appl Energy, 2014, 113: 334-341

[269] LubisMR, MasruraM, SyahfatraA. Clay and zeolite-clay based monoliths as adsorbents for the Hg (II) removal from the aqueous solutions. Int J Technol, 2023, 14(1): 129

[270] Orozco Jiménez AJ (2024) Analysis and design of gas-solid centrifugal contactors based on angular momentum balance

[271] SchellevisM, JacobsT, BrilmanW. CO₂ capture from air in a radial flow contactor: batch or continuous operation?. Front Chem Eng, 2020, 2: 596555

[272] RaganatiF, AmmendolaP. CO₂ post-combustion capture: a critical review of current technologies and future directions. Energ Fuels, 2024, 38(15): 13858-13905

[273] IbigbamiOA, OnilearoOD, AkinyeyeRO. Post-combustion capture and other carbon capture and sequestration (CCS) technologies: a review. Environ Qual Manag, 2024, 34: e22180

[274] XieZ, DuoY, FanT, et al.. Light-induced tumor theranostics based on chemical-exfoliated borophene. Light Sci Appl, 2022, 11(1): 324

[275] ZhangQ, MasoudiM, SunL, et al.. Hydrogen and cushion gas adsorption–desorption dynamics on clay minerals. ACS Appl Mater Interfaces, 2024, 16(40): 53994-54006

[276] KaramiM, SedaeeB, NakhaeeA. Effect of different injection fluids scenarios on swelling and migration of common clays in case of permeability variations: a micromodel study. J Pet Explor Prod Technol, 2023, 13(8): 1761-1787

[277] ShimpiNG, MaliAD, MishraS. Property investigation of surface-modified MMT on mechanical and photo-oxidative degradation of viton rubber composites. Polym Bull, 2016, 73: 3033-3048

RIGHTS & PERMISSIONS

The Author(s)