Recent Advances in the Catalytic Upgrading of Biomass Platform Chemicals Via Hydrotalcite-Derived Metal Catalysts

Abstract

With the world’s fossil fuels being finite in nature, an increasing interest focuses on the application of alternative renewable resources such as biomass. Biomass-derived platform chemicals with abundant functional groups have the potential to replace bulk chemicals for the production of value-added chemicals, fuels, and materials. The upgrading of these platform chemicals relies on the development of efficient catalytic systems. Hydrotalcite, with its wide compositional variety, tuneable anion-exchange capacity, and controlled acidity/basicity sites demonstrates great potential in the catalytic upgrading of biomass and the derived platform chemicals. The past decade has witnessed the emergence of research achievements on the development of efficient and robust hydrotalcite-derived metal catalysts and their applications in the upgrading of biomass or the derived platform chemicals. In this review, we aim to summarize the recent advances on the catalytic upgrading of biomass-derived platform chemicals (e.g., furfural, 5-hydroxymethylfurfural, levulinic acid, and glycerol) via hydrotalcite-derived metal catalysts. We also observed that the crucial role of using hydrotalcite-derived catalysts relies on their strong metal–support interactions. As a result, a section focusing on the discussion of the metal–support interactions of hydrotalcite-derived catalysts was provided.

Keywords

Hydrotalcite / Biomass / Catalysis / Metal–support interactions

References

[1] Huber GW, Iborra S, Corma A Synthesis of transportation fuels from biomass: chemistry, catalysts, and engineering. Chem Rev, 2006, 106(9): 4044-4098.

[2] Tuck CO, Pérez E, Horváth IT, et al. Valorization of biomass: deriving more value from waste. Science, 2012, 337(6095): 695-699.

[3] Krane J Climate change and fossil fuel: an examination of risks for the energy industry and producer states. MRS Energy Sustain, 2017, 4(2): 1-12.

[4] Unruh D, Pabst K, Schaub G Fischer−Tropsch synfuels from biomass: maximizing carbon efficiency and hydrocarbon yield. Energy Fuels, 2010, 24(4): 2634-2641.

[5] Kim S, Kwon EE, Kim YT, et al. Recent advances in hydrodeoxygenation of biomass-derived oxygenates over heterogeneous catalysts. Green Chem, 2019, 21: 3715-3743.

[6] Lin Z, Chen R, Qu Z, et al. Hydrodeoxygenation of biomass-derived oxygenates over metal carbides: from model surfaces to powder catalysts. Green Chem, 2018, 20: 2679-2696.

[7] Lin Q, Li YH, Tang ZR, et al. Valorization of biomass-derived platform molecules via photoredox sustainable catalysis. Trans Tianjin Univ, 2020, 26(5): 325-340.

[8] Werpy T, Petersen G (2004) Top value added chemicals from biomass: volume I—results of screening for potential candidates from sugars and synthesis gas. National Renewable Energy Lab., Golden, CO (US)

[9] Nishimura S, Takagaki A, Ebitani K (2013) Characterization, synthesis and catalysis of hydrotalcite-related materials for highly efficient materials transformations. Green Chem 15(8):2026

[10] Jabłońska M, Palkovits R Nitrogen oxide removal over hydrotalcite-derived mixed metal oxides. Catal Sci Technol, 2016, 6(1): 49-72.

[11] Gutmann N, Müller B Insertion of the dinuclear dihydroxo-bridged Cr(III) aquo complex into the layered double hydroxides of hydrotalcite-type. J Solid State Chem, 1996, 122(1): 214-220.

[12] Lopez T, Bosch P, Ramos E, et al. Synthesis and characterization of sol–gel hydrotalcites. Struct Text Langmuir, 1996, 12(1): 189-192.

[13] Kooli F, Rives V, Ulibarri MA (1995) Preparation and study of decavanadate-pillared hydrotalcite-like anionic clays containing transition metal cations in the layers. 1. samples containing nickel-aluminum prepared by anionic exchange and reconstruction. Inorg Chem 34(21):5114–5121

[14] Feng JT, He YF, Liu YN, et al. Supported catalysts based on layered double hydroxides for catalytic oxidation and hydrogenation: general functionality and promising application prospects. Chem Soc Rev, 2015, 44(15): 5291-5319.

[15] Li YX, Li JX, Yang X, et al. Preparation of CeO₂-modified Mg(Al)O-supported Pt-Cu alloy catalysts derived from hydrotalcite-like precursors and their catalytic behavior for direct dehydrogenation of propane. Trans Tianjin Univ, 2019, 25(2): 169-184.

[16] Baskaran T, Christopher J, Sakthivel A Progress on layered hydrotalcite (HT) materials as potential support and catalytic materials. RSC Adv, 2015, 5(120): 98853-98875.

[17] Hernández WY, Lauwaert J, van der Voort P, et al. Recent advances on the utilization of layered double hydroxides (LDHs) and related heterogeneous catalysts in a lignocellulosic-feedstock biorefinery scheme. Green Chem, 2017, 19(22): 5269-5302.

[18] Mika LT, Cséfalvay E, Németh Á Catalytic conversion of carbohydrates to initial platform chemicals: chemistry and sustainability. Chem Rev, 2018, 118(2): 505-613.

[19] Parihar A, Bhattacharya S Cellulose fast pyrolysis for platform chemicals: assessment of potential targets and suitable reactor technology. Biofuels, Bioprod Bioref, 2020, 14(2): 446-468.

[20] Cai CM, Zhang TY, Kumar R, et al. Integrated furfural production as a renewable fuel and chemical platform from lignocellulosic biomass. J Chem Technol Biotechnol, 2014, 89(1): 2-10.

[21] Tan HW, Abdul Aziz AR, Aroua MK Glycerol production and its applications as a raw material: a review. Renew Sustain Energy Rev, 2013, 27: 118-127.

[22] Machado G, Leon S, Santos F, et al. Literature review on furfural production from lignocellulosic biomass. Nat Resour, 2016, 7(3): 115-129.

[23] Bozell JJ, Petersen GR Technology development for the production of biobased products from biorefinery carbohydrates—the US Department of Energy's “Top 10” revisited. Green Chem, 2010, 12(4): 539.

[24] Lange JP, van der Heide E, van Buijtenen J, et al. Furfural: a promising platform for lignocellulosic biofuels. Chemsuschem, 2012, 5(1): 150-166.

[25] Liu HH, Xu WJ, Liu XH, et al. Aldol condensation of furfural and acetone on layered double hydroxides. Kinet Catal, 2010, 51(1): 75-80.

[26] Ordóñez S, Díaz E, León M, et al. Hydrotalcite-derived mixed oxides as catalysts for different C-C bond formation reactions from bioorganic materials. Catal Today, 2011, 167(1): 71-76.

[27] Tišler Z, Vondrová P, Hrachovcová K, et al. Aldol condensation of cyclohexanone and furfural in fixed-bed reactor. Catalysts, 2019, 9(12): 1068.

[28] Tong XL, Liu ZH, Hu JL, et al. Au-catalyzed oxidative condensation of renewable furfural and ethanol to produce furan-2-acrolein in the presence of molecular oxygen. Appl Catal A Gen, 2016, 510: 196-203.

[29] Mizugaki T, Yamakawa T, Nagatsu Y, et al. Direct transformation of furfural to 1, 2-pentanediol using a hydrotalcite-supported platinum nanoparticle catalyst. ACS Sustain Chem Eng, 2014, 2(10): 2243-2247.

[30] Zhou MH, Zeng Z, Zhu HY, et al. Aqueous-phase catalytic hydrogenation of furfural to cyclopentanol over Cu-Mg-Al hydrotalcites derived catalysts: model reaction for upgrading of bio-oil. J Energy Chem, 2014, 23(1): 91-96.

[31] Wang Y, Zhou MH, Wang TZ, et al. Conversion of furfural to cyclopentanol on Cu/Zn/Al catalysts derived from hydrotalcite-like materials. Catal Lett, 2015, 145(8): 1557-1565.

[32] Manikandan M, Venugopal AK, Prabu K, et al. Role of surface synergistic effect on the performance of Ni-based hydrotalcite catalyst for highly efficient hydrogenation of furfural. J Mol Catal A: Chem, 2016, 417: 153-162.

[33] Zhang J, Chen JZ Selective transfer hydrogenation of biomass-based furfural and 5-hydroxymethylfurfural over hydrotalcite-derived copper catalysts using methanol as a hydrogen donor. ACS Sustain Chem Eng, 2017, 5(7): 5982-5993.

[34] Oleg L, David K, Romana V, et al. Using Mg–Al mixed oxide and reconstructed hydrotalcite as basic catalysts for aldol condensation of furfural and cyclohexanone. Chem Catal Chem, 2018, 10(6): 1464-1475.

[35] Axelsson L, Franzén M, Ostwald M, et al. Jatropha cultivation in southern India: assessing farmers' experiences. Biofuels Bioprod Bioref, 2012, 6(3): 246-256.

[36] Menegazzo F, Ghedini E, Signoretto M 5-hydroxymethylfurfural (HMF) production from real biomasses. Molecules, 2018, 23(9): 2201.

[37] Körner P, Jung D, Kruse A The effect of different Brønsted acids on the hydrothermal conversion of fructose to HMF. Green Chem, 2018, 20(10): 2231-2241.

[38] Sthlberg T, Rodriguez-Rodriguez S, Fristrup P, et al. Metal-free dehydration of glucose to 5-(hydroxymethyl)furfural in ionic liquids with boric acid as a promoter. Chem Eur J, 2011, 17(5): 1456-1464.

[39] Labauze H, Camy S, Floquet P, et al. Kinetic study of 5-hydroxymethylfurfural synthesis from fructose in high pressure CO₂–water two-phase system. Ind Eng Chem Res, 2019, 58(1): 92-100.

[40] Cuervo OHP, Romanelli GP, Cubillos JA, et al. Selective catalytic dehydration of xylose to furfural and fructose and glucose to 5-hydroximethylfurfural (HMF) using preyssler heteropolyacid. ChemistrySelect, 2020, 5(14): 4186-4193.

[41] van Putten RJ, van der Waal JC, de Jong E, et al. Hydroxymethylfurfural, a versatile platform chemical made from renewable resources. Chem Rev, 2013, 113(3): 1499-1597.

[42] Nakagawa Y, Yabushita M, Tomishige K Reductive conversion of biomass-derived furancarboxylic acids with retention of carboxylic acid moiety. Trans Tianjin Univ, 2021, 27(3): 165-179.

[43] Hou QD, Qi XH, Zhen MN, et al. Biorefinery roadmap based on catalytic production and upgrading 5-hydroxymethylfurfural. Green Chem, 2021, 23(1): 119-231.

[44] Sousa AF, Vilela C, Fonseca AC, et al. Biobased polyesters and other polymers from 2, 5-furandicarboxylic acid: a tribute to furan excellency. Polym Chem, 2015, 6(33): 5961-5983.

[45] Gorbanev YY, Kegnæs S, Riisager A Selective aerobic oxidation of 5-hydroxymethylfurfural in water over solid ruthenium hydroxide catalysts with magnesium-based supports. Catal Lett, 2011, 141(12): 1752-1760.

[46] Gorbanev YY, Kegnæs S, Riisager A Effect of support in heterogeneous ruthenium catalysts used for the selective aerobic oxidation of HMF in water. Top Catal, 2011, 54(16–18): 1318-1324.

[47] Xie JH, Nie JF, Liu HC Aqueous-phase selective aerobic oxidation of 5-hydroxymethylfurfural on Ru/C in the presence of base. Chin J Catal, 2014, 35(6): 937-944.

[48] Gupta NK, Nishimura S, Takagaki A, et al. Hydrotalcite-supported gold-nanoparticle-catalyzed highly efficient base-free aqueous oxidation of 5-hydroxymethylfurfural into 2, 5-furandicarboxylic acid under atmospheric oxygen pressure. Green Chem, 2011, 13(4): 824.

[49] Sun WX, Gao TQ, Zhu GH, et al. Influence of support properties and particle size on the gold-catalyzed base-free aerobic oxidation of 5-hydroxymethylfurfural. ChemistrySelect, 2020, 5(4): 1416-1423.

[50] Gao TQ, Gao T, Fang WH, et al. Base-free aerobic oxidation of 5-hydroxymethylfurfural to 2, 5-furandicarboxylic acid in water by hydrotalcite-activated carbon composite supported gold catalyst. Mol Catal, 2017, 439: 171-179.

[51] Choudhary H, Ebitani K Hydrotalcite-supported PdPt-catalyzed aerobic oxidation of 5-hydroxymethylfurfural to 2, 5-furandicarboxylic acid in water. Chem Lett, 2016, 45(6): 613-615.

[52] Xia HA, An JH, Hong M, et al. Aerobic oxidation of 5-hydroxymethylfurfural to 2, 5-difurancarboxylic acid over Pd-Au nanoparticles supported on Mg–Al hydrotalcite. Catal Today, 2019, 319: 113-120.

[53] Wang HY, Zhu CH, Li D, et al. Recent advances in catalytic conversion of biomass to 5-hydroxymethylfurfural and 2, 5-dimethylfuran. Renew Sustain Energy Rev, 2019, 103: 227-247.

[54] Hansen TS, Barta K, Anastas PT, et al. One-pot reduction of 5-hydroxymethylfurfural via hydrogen transfer from supercritical methanol. Green Chem, 2012, 14(9): 2457.

[55] Kumalaputri AJ, Bottari G, Erne PM, et al. Tunable and selective conversion of 5-HMF to 2, 5-furandimethanol and 2, 5-dimethylfuran over copper-doped porous metal oxides. Chemsuschem, 2014, 7(8): 2266-2275.

[56] Kong X, Zheng RX, Zhu YF, et al. Rational design of Ni-based catalysts derived from hydrotalcite for selective hydrogenation of 5-hydroxymethylfurfural. Green Chem, 2015, 17(4): 2504-2514.

[57] Kong X, Zhu YF, Zheng HY, et al. Inclusion of Zn into metallic Ni enables selective and effective synthesis of 2, 5-dimethylfuran from bioderived 5-hydroxymethylfurfural. ACS Sustainable Chem Eng, 2017, 5(12): 11280-11289.

[58] Jiang ZW, Hu D, Zhao ZY, et al. Mini-review on the synthesis of furfural and levulinic acid from lignocellulosic biomass. Processes, 2021, 9(7): 1234.

[59] Kohli K, Prajapati R, Sharma B Bio-based chemicals from renewable biomass for integrated biorefineries. Energies, 2019, 12(2): 233.

[60] Sheldon RA Green and sustainable manufacture of chemicals from biomass: state of the art. Green Chem, 2014, 16(3): 950-963.

[61] Yan K, Liao JY, Wu X, et al. A noble-metal free Cu-catalyst derived from hydrotalcite for highly efficient hydrogenation of biomass-derived furfural and levulinic acid. RSC Adv, 2013, 3(12): 3853.

[62] Horváth IT, Mehdi H, Fábos V, et al. Γ-Valerolactone—a sustainable liquid for energy and carbon-based chemicals. Green Chem, 2008, 10(2): 238-242.

[63] Bond JQ, Alonso DM, Wang D et al (2012) Integrated catalytic conversion of g-valerolactone to liquid alkenes for transportation fuels 1110:1110–1115

[64] Termvidchakorn C, Faungnawakij K, Kuboon S, et al. A novel catalyst of Ni hybridized with single-walled carbon nanohorns for converting methyl levulinate to γ-valerolactone. Appl Surf Sci, 2019, 474: 161-168.

[65] Omoruyi U, Page S, Hallett J, et al. Homogeneous catalyzed reactions of levulinic acid: to γ-valerolactone and beyond. Chemsuschem, 2016, 9(16): 2037-2047.

[66] Fábos V, Mika LT, Horváth IT Selective conversion of levulinic and formic acids to γ-valerolactone with the shvo catalyst. Organometallics, 2014, 33(1): 181-187.

[67] Zhang J, Chen JZ, Guo YY, et al. Effective upgrade of levulinic acid into γ-valerolactone over an inexpensive and magnetic catalyst derived from hydrotalcite precursor. ACS Sustain Chem Eng, 2015, 3(8): 1708-1714.

[68] Zhang RH, Ma YB, You F, et al. Exploring to direct the reaction pathway for hydrogenation of levulinic acid into γ-valerolactone for future clean-energy vehicles over a magnetic Cu-Ni catalyst. Int J Hydrog Energy, 2017, 42(40): 25185-25194.

[69] Gupta SSR, Kantam ML Selective hydrogenation of levulinic acid into γ-valerolactone over Cu/Ni hydrotalcite-derived catalyst. Catal Today, 2018, 309: 189-194.

[70] Gundeboina R, Velisoju VK, Gutta N, et al. Influence of surface Lewis acid sites for the selective hydrogenation of levulinic acid to γ-valerolactone over Ni-Cu-Al mixed oxide catalyst. React Kinetics Mech Catal, 2019, 127(2): 601-616.

[71] Long XD, Sun P, Li ZL, et al. Magnetic Co/Al₂O₃ catalyst derived from hydrotalcite for hydrogenation of levulinic acid to γ-valerolactone. Chin J Catal, 2015, 36(9): 1512-1518.

[72] Gundeboina R, Gadasandula S, Velisoju VK, et al. Ni-Al-Ti hydrotalcite based catalyst for the selective hydrogenation of biomass-derived levulinic acid to γ-valerolactone. ChemistrySelect, 2019, 4(1): 202-210.

[73] Swarna Jaya V, Sudhakar M, Naveen Kumar S, et al. Selective hydrogenation of levulinic acid to γ-valerolactone over a Ru/Mg–LaO catalyst. RSC Adv, 2015, 5(12): 9044-9049.

[74] Varkolu M, Velpula V, Burri DR, et al. Gas phase hydrogenation of levulinic acid to γ-valerolactone over supported Ni catalysts with formic acid as hydrogen source. New J Chem, 2016, 40(4): 3261-3267.

[75] Hussain S, Velisoju VK, Rajan NP, et al. Synthesis of γ-valerolactone from levulinic acid and formic acid over Mg–Al hydrotalcite like compound. ChemistrySelect, 2018, 3(22): 6186-6194.

[76] Tanwongwan W, Eiad-Ua A, Kraithong W, et al. Simultaneous activation of copper mixed metal oxide catalysts in alcohols for gamma-valerolactone production from methyl levulinate. Appl Catal A: Gen, 2019, 579: 91-98.

[77] Crnomarkovic M, Panchaksharam Y, Spekreijse J et al (2018) Road to bio business cases: case studies on potentially attractive opportunities for bio-based chemicals in Europe Consortium 73–81

[78] Ramesh S, Devred F, van den Biggelaar L, et al. Hydrotalcites promoted by NaAlO₂ as strongly basic catalysts with record activity in glycerol carbonate synthesis. ChemCatChem, 2018, 10(6): 1398-1405.

[79] Zhou CHC, Beltramini JN, Fan YX, et al. Chemoselective catalytic conversion of glycerol as a biorenewable source to valuable commodity chemicals. Chem Soc Rev, 2008, 37(3): 527-549.

[80] Christoph R, Schmidt B, Steinberner U et al (2006) Glycerol. Ullmann’s Encycl Ind Chem 754–756

[81] Ochoa-Gómez JR, Gómez-Jiménez-aberasturi O, Ramírez-López C, et al. A brief review on industrial alternatives for the manufacturing of glycerol carbonate, a green chemical. Org Process Res Dev, 2012, 16(3): 389-399.

[82] Takagaki A, Iwatani K, Nishimura S, et al. Synthesis of glycerol carbonate from glycerol and dialkyl carbonates using hydrotalcite as a reusable heterogeneous base catalyst. Green Chem, 2010, 12(4): 578.

[83] Zheng LP, Xia SX, Hou ZT, et al. Transesterification of glycerol with dimethyl carbonate over Mg-Al hydrotalcites. Chin J Catal, 2014, 35(3): 310-318.

[84] Marimuthu M, Marimuthu P, S K AK, et al. Tuning the basicity of Cu-based mixed oxide catalysts towards the efficient conversion of glycerol to glycerol carbonate. Mol Catal, 2018, 460: 53-62.

[85] Bai RX, Wang Y, Wang S, et al. Synthesis of glycerol carbonate from glycerol and dimethyl carbonate catalyzed by NaOH/γ-Al₂O₃. Fuel Process Technol, 2013, 106: 209-214.

[86] Tsuji A, Rao KT, Nishimura S, et al. Selective oxidation of glycerol by using a hydrotalcite-supported platinum catalyst under atmospheric oxygen pressure in water. Chemsuschem, 2011, 4(4): 542-548.

[87] Zhang JB, Li XL, Xu M, et al. Glycerol aerobic oxidation to glyceric acid over Pt/hydrotalcite catalysts at room temperature. Sci Bull, 2019, 64(23): 1764-1772.

[88] Xu CL, Du YQ, Li C, et al. Insight into effect of acid/base nature of supports on selectivity of glycerol oxidation over supported Au–Pt bimetallic catalysts. Appl Catal B Environ, 2015, 164: 334-343.

[89] Liu MY, Yan WJ, Wu JW, et al. Electronically coupled PtCo/MgAl hydrotalcite catalysts display tunable selectivity toward glyceric acid and lactic acid for glycerol conversion. Catal Lett, 2020, 150(9): 2590-2598.

[90] Ramesh S, Venkatesha NJ Template free synthesis of Ni-perovskite: an efficient catalyst for hydrogen production by steam reforming of bioglycerol. ACS Sustain Chem Eng, 2017, 5(2): 1339-1346.

[91] Boga DA, Oord R, Beale AM, et al. Highly selective bimetallic Pt–Cu/Mg(Al)O catalysts for the aqueous-phase reforming of glycerol. ChemCatChem, 2013, 5(2): 529-537.

[92] Pendem C, Sarkar B, Siddiqui N, et al. K-promoted Pt-hydrotalcite catalyst for production of H₂ by aqueous phase reforming of glycerol. ACS Sustain Chem Eng, 2018, 6(2): 2122-2131.

[93] Wen GD, Xu YP, Ma HJ, et al. Production of hydrogen by aqueous-phase reforming of glycerol. Int J Hydrog Energy, 2008, 33(22): 6657-6666.

[94] Dang CX, Wu SJ, Cao YH, et al. Co-production of high quality hydrogen and synthesis gas via sorption-enhanced steam reforming of glycerol coupled with methane reforming of carbonates. Chem Eng J, 2019, 360: 47-53.

[95] Yin YR, Tang T, Xu CL Au/CuMgAl-hydrotalcite catalysts promoted by Cu⁺ and basic sites for selective oxidation of glycerol to dihydroxyacetone. Gold Bull, 2017, 50(4): 319-326.

[96] Lari GM, Pastore G, Mondelli C, et al. Towards sustainable manufacture of epichlorohydrin from glycerol using hydrotalcite-derived basic oxides. Green Chem, 2018, 20(1): 148-159.

[97] Carvalho DC, Pinheiro LG, Campos A, et al. Characterization and catalytic performances of copper and cobalt-exchanged hydroxyapatite in glycerol conversion for 1-hydroxyacetone production. Appl Catal A Gen, 2014, 471: 39-49.

[98] Mazarío J, Concepción P, Ventura M, Domine ME Continuous catalytic process for the selective dehydration of glycerol over Cu-based mixed oxide. J Catal, 2020, 385: 160-175.

[99] Fulajtárova K, Soták T, Hronec M, et al. Aqueous phase hydrogenation of furfural to furfuryl alcohol over Pd-Cu catalysts. Appl Catal A Gen, 2015, 502: 78-85.

[100] Studt F, Abild-Pedersen F, Bligaard T, et al. Identification of non-precious metal alloy catalysts for selective hydrogenation of acetylene. Science, 2008, 320(5881): 1320-1322.