Optimizing the Aspect Ratio of Cephalexin in Reactive Crystallization by Controlling Supersaturation and Seeding Policy

Abstract

Batch crystallization in acidic aqueous solution of cephalexin was conducted by reactive crystallization with or without seeding. Supersaturation was generated by mixing ammonia and acidic aqueous solution of cephalexin and controlled by solution feeding rate and seeding conditions. UV and Morphologi G3 were used to measure supersaturation and aspect ratio. Experimental results demonstrated that burst nucleation occurred and the products were needle-like at high supersaturation; meanwhile, the products were plate-like and had high aspect ratio at low supersaturation. Analysis of the measured supersaturation profiles and corresponding aspect ratio explained the mechanisms governing the aspect ratio. The optimized operating parameters were also proposed (seeding supersaturation is equal to 1.3, seed mass ratio 8% and feeding rate 368 μL/min).

Keywords

Reactive crystallization / Supersaturation control / Aspect ratio / Crystal habit

References

[1] Mullin JW. Crystallization, 1992, 3 Oxford: Butterworth-Heinemann.

[2] Tavare NS. Industrial crystallization, 1995, New York: Plenum Press

[3] Kubota N, Doki N, Yokota M, et al. Seeding policy in batch cooling crystallization. Powder Technol, 2001, 121(1): 31-38.

[4] Borchert C, Temmel E, Eisenschmidt H, et al. Image-based in situ identification of face specific crystal growth rates from crystal populations. Cryst Growth Des, 2014, 14(3): 952-971.

[5] Yang G, Kubota N, Sha Z, et al. Crystal shape control by manipulating supersaturation in batch cooling crystallization. Cryst Growth Des, 2006, 6(12): 2799-2803.

[6] Bordawekar S, Kuvadia Z, Dandekar P, et al. Interesting morphological behavior of organic salt choline fenofibrate: effect of supersaturation and polymeric impurity. Cryst Growth Des, 2014, 14(8): 3800-3812.

[7] Lewiner F, Fevotte G, Klein JP, et al. Improving batch cooling seeded crystallization of an organic weed-killer using on-line ATR FTIR measurement of supersaturation. J Cryst Growth, 2001, 226(2–3): 348-362.

[8] Barrett M, Hao H, Maher A, et al. In situ monitoring of supersaturation and polymorphic form of piracetam during batch cooling crystallization. Organ Process Res Dev, 2011, 15(3): 681-687.

[9] Tsuji A, Nakashima E, Hamano S, et al. Physicochemical properties of amphoteric β-lactam antibiotics I: stability, solubility, and dissolution behavior of amino penicillins as a function of pH. J Pharm Sci, 1978, 67(8): 1059-1066.

[10] Bohlin M, Rasmuson AC. Importance of macromixing in batch cooling crystallization. AIChE J, 1996, 42(3): 691-699.

[11] Garside J. Nucleation: biological mineralization and demineralization, 1982, Berlin: Springer 23-35.

[12] Donnet M, Bowen P, Jongen N, et al. Use of seeds to control precipitation of calcium carbonate and determination of seed nature. Langmuir, 2005, 21(1): 100-108.

[13] Chung SH, Ma DL, Braatz RD. Optimal seeding in batch crystallization. Can J Chem Eng, 1999, 77(3): 590-595.

[14] Bohlin M, Rasmuson AC. Application of controlled cooling and seeding in batch crystallization. Can J Chem Eng, 1992, 70(1): 120-126.