Numerical Study on Heat Transfer and Flow Characteristics for Laminar Flow in a Circular Tube with Swirl Generators

Abstract

This study investigated the heat transfer and flow characteristics of one kind of swirl generator in a circular heat exchanger tube through a numerical simulation. The swirl flow induced by this type of swirl generator can obtain a high heat transfer rate with minimal pressure drop penalty. The simulations were carried out to understand the physical behavior of this kind of mesoscale heat enhancement component. By visualizing the heat transfer and flow characteristics, it is found that the swirl flow is induced by swirl generator in the circular tube couples with the impinging jet effect. After passing through the swirl generator, the local friction factor of liquid can quickly return to lower level more quickly, while the local Nusselt number maintains higher values for a distance; thus, the evaluation criterion of local performance is improved. Single-factor optimization is used for three geometric parameters, i.e., the angle of swirl generator (25º, 45º, and 60º), the length of swirl generator (0.005, 0.01, and 0.02 m), and the center rod radius (1, 2, and 3 mm). The optimum parameters of the swirl generator for laminar flow of air in a circular tube are obtained, which should be 60º, 0.005 m, and 3 mm, respectively.

Keywords

Swirl generator / Local spatial–temporal characteristic / Swirling flow / Impinging jet effect

References

[1] Li JH. Approaching virtual process engineering with exploring mesoscience. Chem Eng J, 2015, 278: 541-555.

[2] Chen Q, Liang XG, Guo ZY. Entransy theory for the optimization of heat transfer—a review and update. Int J Heat Mass Tranf, 2013, 63: 65-81.

[3] Zhang XY, Liu ZC, Liu W. Numerical studies on heat transfer and flow characteristics for laminar flow in a tube with multiple regularly spaced twisted tapes. Int J Therm Sci, 2012, 58: 157-167.

[4] Jedsadaratanachai W, Jayranaiwachira N, Promvonge P. 3D numerical study on flow structure and heat transfer in a circular tube with V-baffles. Chin J Chem Eng, 2015, 23(2): 342-349.

[5] Saha SK, Dutta A, Dhal SK. Friction and heat transfer characteristics of laminar swirl flow through a circular tube fitted with regularly spaced twisted-tape elements. Int J Heat Mass Tranf, 2001, 44(22): 4211-4223.

[6] Arzutuğ ME, Yapıcı S. Electrochemical mass transfer in impinging swirl jets. Ind Eng Chem Res, 2009, 48(3): 1593-1602.

[7] Wannassi M, Monnoyer F. Numerical simulation of the flow through the blades of a swirl generator. Appl Math Model, 2016, 40(2): 1247-1259.

[8] Jia H, Liu ZC, Liu W, et al. Convective heat transfer optimization based on minimum entransy dissipation in the circular tube. Int J Heat Mass Tranf, 2014, 73: 124-129.

[9] Vashisth S, Kumar V, Nigam KDP. A review on the potential applications of curved geometries in process industry. Ind Eng Chem Res, 2008, 47(10): 3291-3337.

[10] Meng J, Liang X, Chen Z, et al. Experimental study on convective heat transfer in alternating elliptical axis tubes. Exp Therm Fluid Sci, 2005, 29(4): 457-465.

[11] Xu WG, Wang SY, Zhang QH, et al. Experimental and numerical studies of heat transfer and friction factor of therminol liquid phase heat transfer fluid in a ribbed tube. Appl Therm Eng, 2016, 95: 165-177.

[12] Liu W, Yang K, Liu ZC, et al. Mechanism of heat transfer enhancement in the core flow of a tube and its numerical simulation. Open Trans Phe J, 2010, 2: 9-15.

[13] Zheng N, Liu P, Shan F, et al. Numerical studies on thermo-hydraulic characteristics of laminar flow in a heat exchanger tube fitted with vortex rods. Int J Therm Sci, 2016, 100: 448-456.

[14] Fan AW, Deng JJ, Guo J, et al. A numerical study on thermo-hydraulic characteristics of turbulent flow in a circular tube fitted with conical strip inserts. Appl Therm Eng, 2011, 31(14–15): 2819-2828.

[15] Fan AW, Deng JJ, Nakayama A, et al. Parametric study on turbulent heat transfer and flow characteristics in a circular tube fitted with louvered strip inserts. Int J Heat Mass Tranf, 2012, 55(19–20): 5205-5213.

[16] You YH, Fan AW, Liu W, et al. Thermo-hydraulic characteristics of laminar flow in an enhanced tube with conical strip inserts. Int J Therm Sci, 2012, 61: 28-37.

[17] Guo J, Yan YX, Liu W, et al. Enhancement of laminar convective heat transfer relying on excitation of transverse secondary swirl flow. Int J Therm Sci, 2015, 87: 199-206.

[18] Piriyarungrod N, Eiamsa-ard S, Thianpong C, et al. Heat transfer enhancement by tapered twisted tape inserts. Chem Eng Process, 2015, 96: 62-71.

[19] Zhang Z, Yang WM, Guan CF, et al. Numerical study on thermo-hydraulic characteristics of turbulent flow in a circular tube fitted with helical blade rotors. Int J Heat Mass Tranf, 2013, 60: 603-611.

[20] Zheng N, Liu P, Shan F, et al. Effects of rib arrangements on the flow pattern and heat transfer in an internally ribbed heat exchanger tube. Int J Therm Sci, 2016, 101: 93-105.

[21] Guo ZY, Tao WQ, Shah RK. The field synergy (coordination) principle and its applications in enhancing single phase convective heat transfer. Int J Heat Mass Tranf, 2005, 48(9): 1797-1807.

[22] Tao WQ, He YL, Wang QW, et al. A unified analysis on enhancing single phase convective heat transfer with field synergy principle. Int J Heat Mass Tranf, 2002, 45(24): 4871-4879.

[23] Li Z, Guo Z. Advances in Transport Phenomena, 2011, Berlin: Springer.

[24] Fettaka S, Thibault J, Gupta Y. Design of shell-and-tube heat exchangers using multiobjective optimization. Int J Heat Mass Tranf, 2013, 60: 343-354.

[25] Sajadi AR, Sorkhabi SYD, Ashtiani D, et al. Experimental and numerical study on heat transfer and flow resistance of oil flow in alternating elliptical axis tubes. Int J Heat Mass Tranf, 2014, 77: 124-130.

[26] Liu W, Liu ZC, Ma L. Application of a multi-field synergy principle in the performance evaluation of convective heat transfer enhancement in a tube. Chin Sci Bull, 2012, 57(13): 1600-1607.

[27] Ma L, Yang J, Liu W, et al. Physical quantity synergy analysis and efficiency evaluation criterion of heat transfer enhancement. Int J Therm Sci, 2014, 80: 23-32.

[28] Fan JF, Ding WK, Zhang JL, et al. A performance evaluation plot of enhanced heat transfer techniques oriented for energy-saving. Int J Heat Mass Tranf, 2009, 52(1–2): 33-44.

[29] Xiao XM, Zhang LH, Li XG, et al. Numerical investigation of helical baffles heat exchanger with different Prandtl number fluids. Int J Heat Mass Tranf, 2013, 63: 434-444.

[30] Webb RL. Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design. Int J Heat Mass Tranf, 1981, 24(4): 715-726.

[31] Liu W, Liu ZC, Huang SY. Physical quantity synergy in the field of turbulent heat transfer and its analysis for heat transfer enhancement. Chin Sci Bull, 2010, 55(23): 2589-2597.

[32] Liu W, Liu ZC, Guo ZY. Physical quantity synergy in laminar flow field of convective heat transfer and analysis of heat transfer enhancement. Chin Sci Bull, 2009, 54(19): 3579-3586.