Effects of Formulation Parameters and Process Variables on the Properties of Granules Obtained by Reactive Granulation

Abstract

In this work, granulation between dodecyl-benzenesulfonic acid and sodium carbonate was investigated in a laboratory-scale high shear mixer. The effects of formulation parameters and process variables, including primary carbonate size, binder content, impeller speed, and operating temperature, were correlated to the properties of the product granules. Design of experiment and analysis of variance were combined to analyze the experimental data, and results showed that larger granule sizes with fewer fine particles can be obtained by employing higher binder contents and larger sodium carbonate sizes. The shear force of the impeller can extensively break oversized granules. The binder content exerted a contrasting effect on the flowability of granules formed with two kinds of sodium carbonate, likely because of differences in the liquid saturation of the solids. The dissolution rate determined by in-line size analysis showed that high binder contents were beneficial to dissolution performance, and the relationships between Hunter color and tested parameters were evaluated. The results of this work can be used as a reliable guidance for process control and optimization in powder detergent manufacturing.

Keywords

Dry neutralization / Granulation / Size / Flowability / Dissolution rate / Color

References

[1] Adam I, Moretti G, Groot WH. The manufacture of modern detergent powders, 1995, Wassenaar: Herman De Groot Academic Publisher.

[2] Scheibel JJ. The evolution of anionic surfactant technology to meet the requirements of the laundry detergent industry. J Surf Deterg, 2004, 7(4): 319-328.

[3] Yu YX, Zhao J, Bayly AE. Development of surfactants and builders in detergent formulations. Chin J Chem Eng, 2008, 16(4): 517-527.

[4] Ramaraju SM, Carroll BJ, Chambers JG, et al. The liquid crystalline phases formed by linear-dodecylbenzene sulphonic acid during neutralisation with sodium carbonate. Coll Surf A, 2006, 288(1–3): 77-85.

[5] Schöngut M, Grof Z, Štěpánek F. Kinetics of dry neutralization of dodecyl-benzenesulfonic acid with respect to detergent granulation. Ind Eng Chem Res, 2011, 50(20): 11576-11584.

[6] Schöngut M, Smrčka D, Gregor T, et al. Investigation of rate-limiting steps during granulation with a chemically reactive binder. Powder Technol, 2015, 270: 510-519.

[7] Germanà S, Simons S, Bonsall J. Reactive binders in detergent granulation: understanding the relationship between binder phase changes and granule growth under different conditions of relative humidity. Ind Eng Chem Res, 2008, 47(17): 6450-6458.

[8] Germaná S, Simons S, Bonsall J, et al. LAS acid reactive binder: wettability and adhesion behaviour in detergent granulation. Powder Technol, 2009, 189(2): 385-393.

[9] Saw HY, Davies CE, Jones JR, et al. Cohesion of lactose powders at low consolidation stresses. Adv Powder Technol, 2013, 24(4): 796-800.

[10] Koynov S, Glasser B, Muzzio F. Comparison of three rotational shear cell testers: powder flowability and bulk density. Powder Technol, 2015, 283: 103-112.

[11] Jenike AW (1964) Storage and flow of solids, bulletin No. 123. Bulletin of the University of Utah

[12] Ameny MA, Wilson PW. Relationship between Hunter color values and β-Carotene contents in White-Fleshed African sweetpotatoes (Ipomoea batatas Lam). J Sci Food Agric, 1997, 73(3): 301-306.

[13] Lavelli V, Torresani MC. Modelling of lycopene-rich by-products of tomato processing. Food Chem, 2011, 125(2): 529-535.

[14] Balashanmugam M, Cheong YS, Alam Z, et al. Dispersion of a semi-solid BINDER in a moving powder bed during detergent agglomeration. Chem Eng Res Des, 2016, 110: 32-42.

[15] Iveson SM, Litster JD. Growth regime map for liquid-bound granules. AIChE J, 1998, 44(7): 1510-1518.

[16] Knight PC, Instone T, Pearson JMK, et al. An investigation into the kinetics of liquid distribution and growth in high shear mixer agglomeration. Powder Technol, 1998, 97(3): 246-257.

[17] Hoornaert F, Wauters PAL, Meesters GMH, et al. Agglomeration behaviour of powders in a Lödige mixer granulator. Powder Technol, 1998, 96(2): 116-128.

[18] Eliasen H, Kristensen HG, Schæfer T. Growth mechanisms in melt agglomeration with a low viscosity binder. Int J Pharm, 1999, 186(2): 149-159.

[19] Schæfer T. Growth mechanisms in melt agglomeration in high shear mixers. Powder Technol, 2001, 117(1): 68-82.

[20] Eliasen H, Schæfer T, Kristensen HG. Effects of binder rheology on melt agglomeration in a high shear mixer. Int J Pharm, 1998, 176(1): 73-83.

[21] Mills PJT, Seville JPK, Knight PC, et al. The effect of binder viscosity on particle agglomeration in a low shear mixer/agglomerator. Powder Technol, 2000, 113(1): 140-147.

[22] Keningley ST, Knight PC, Marson AD. An investigation into the effects of binder viscosity on agglomeration behaviour. Powder Technol, 1997, 91(2): 95-103.

[23] Chitu TM, Oulahna D, Hemati M. Wet granulation in laboratory scale high shear mixers: effect of binder properties. Powder Technol, 2011, 206(1): 25-33.

[24] Ennis BJ, Tardos G, Pfeffer R. A micro level based characterisation of granular phenomen. Powder Technol, 1991, 65(1–3): 257-272.

[25] Walker GM, Andrews G, Jones D. Effect of process parameters on the melt granulation of pharmaceutical powders. Powder Technol, 2006, 165(3): 161-166.

[26] Iveson SM, Litster JD. Fundamental studies of granule consolidation. Part 2: quantifying the effects of particle and binder properties. Powder Technol, 1998, 99(3): 243-250.