Pressure angle in parallel mechanisms: From planar to spatial

Abstract

This paper presents the evolution process of pressure angles from planar parallel mechanisms to spatial parallel mechanisms. Manipulability and condition number, which are frequently used in the optimum design of parallel mechanisms, are introduced from serial robots at first. Then, both theoretical analysis and practical experiences demonstrate that these concepts seem imperfect when they are used in parallel mechanisms. For this reason, this paper introduces the pressure angles in planar 4-bar mechanisms to spatial parallel mechanisms, which include redundant parallel mechanisms. Two kinds of pressure angles extracted from the determinant of direct and indirect Jacobian matrices are investigated. Moreover, two comprehensive and visible global performance indices are defined, showing the advantages in evaluating the workspace, singularity and motion/force transmission capabilities. With a 2-DOF planar and a 3-DOF spatial parallel mechanism as examples, the application of the performance indices is investigated and compared with the condition number at last. The proposed concept can be extended to other spatial parallel mechanisms.

Keywords

pressure angle / performance evaluation / global performance index / parallel mechanism

References

[1] Hall A S. Kinematics and Linkage Design[M], 1961, Englewood Cliffs, NJ, USA: Prentice-Hall.

[2] Zheng L, Angeles J. The properties of constant branch four-bar linkages and their applications[J]. ASME Journal of Mechanical Design, 1992, 114(4): 574-579.

[3] Balli S S, Chand S. Synthesis of a five-bar mechanism of variable topology type with transmission angle control[J]. ASME Journal of Mechanical Design, 2004, 126(1): 128-134.

[4] Bawab S, Kinzel G L, Waldron K J. Rectified synthesis of six-bar mechanisms with well-defined transmission angles for four-position motion generation[J]. ASME Journal of Mechanical Design, 1996, 118(3): 377-383.

[5] Philipp R E, Freudenstein F. Synthesis of two-degree-offreedom linkages —A feasibility study of numerical methods of synthesis of bivariate function generators[J]. Journal of Mechanisms, 1966, 1(1): 9-21.

[6] Chiang C H. Design of spherical and planar crank-rockers and double-rockers as function generators—I[J]. Mechanism and Machine Theory, 1986, 21(4): 287-296.

[7] Sutherland G, Roth B. A transmission index for spatial mechanism[J]. ASME Journal of Engineering for Industry, 1973, 95(2): 589-597.

[8] Kim J, Park F C, Ryu S J, et al. Design and analysis of a redundantly actuated parallel mechanism for rapid machining[J]. IEEE Transactions on Robotics and Automation, 2001, 17(4): 423-434.

[9] Huang T, Li Z, Li M, et al. Conceptual design and dimensional synthesis of a novel 2-DOF translational parallel robot for pick-and-place operations[J]. ASME Journal of Mechanical Design, 2004, 126(3): 449-455.

[10] Liu X, Wang J, Oh K, et al. A new approach to the design of a DELTA robot with a desired workspace[J]. Journal of Intelligent and Robotic Systems, 2004, 39(2): 209-225.

[11] Zhao Q, Wang P, Mei Jiangping. Controller parameter tuning of Delta robot based on servo identification[J]. Chinese Journal of Mechanical Engineering, 2015, 28(2): 267-275.

[12] Miller K. Maximization of workspace volume of 3-DOF spatial parallel manipulator[J]. ASME Journal of Mechanical Design, 2002, 124(2): 347-350.

[13] Gosselin C, Angeles J. Singularity analysis of closed-loop kinematic chains[J]. IEEE Transactions on Robotics and Automation, 1990, 6(3): 281-290.

[14] Stoughton R S, Arai T. A modified stewart platform manipulator with improved dexterity[J]. IEEE Transactions on Robotics and Automation, 1993, 9(2): 166-173.

[15] Yoon W K, Suehiro T, Tsumaki Y, et al. Stiffness analysis and design of a compact modified Delta parallel mechanism[J]. Robotica, 2004, 22(4): 463-475.

[16] Masuda T, Fujiwara M, Kato N, et al. Mechanism configuration evaluation of a linear-actuated parallel mechanism using manipulability[C]. IEEE International Conference on Robotics and Automation, 2002.

[17] Gosselin C, Angeles J. A global performance index for the kinematic optimization of robotic manipulators[J]. ASME Journal of Mechanical Design, 1991, 113(3): 220-226.

[18] Huang T, Li M, Li Z, et al. Optimal kinematic design of 2-DOF parallel manipulators with wellshaped workspace bounded by a specified conditioning index[J]. IEEE Transactions on Robotics and Automation, 2004, 20(3): 538-543.

[19] Miller K. Optimal design and modeling of spatial parallel manipulators[J]. International Journal of Robotics Research, 2004, 23(2): 127-140.

[20] Choi H B, Konno A, Uchiyama M. Design, implementation, and performance evaluation of a 4-DOF parallel robot[J]. Robotica, 2010, 28(1): 107-118.

[21] Merlet J P. Jacobian, manipulability, condition number, and accuracy of parallel robots[J]. ASME Journal of Mechanical Design, 2005, 128(1): 199-206.

[22] Merlet J P. Redundant parallel manipulators[J]. Laboratory Robotics and Automation, 1996, 8(1): 17-24.

[23] Zhang L, Mei J, Zhao X, et al. Dimensional synthesis of the Delta robot using transmission angle constraints[J]. Robotica, 2011, 30(3): 343-349.