Design of offshore wind power foundation with multi-bucket

Abstract

Three- and four-bucket offshore wind power foundations with a new form of force-transferring structure are proposed in this paper, and the integrated finite element model of foundation-soil-transition structure is established by using ABAQUS. The carrying capacity of the proposed foundations is studied under vertical load, horizontal load and bending moment. It can be seen that the vertical bearing capacity of multi-bucket foundation can be roughly estimated by the vertical bearing capacity of single-bucket; the horizontal bearing capacity of the three-bucket foundation scheme is controlled by displacement, while that of the four-bucket foundation scheme is controlled by the internal forces of soils. Moreover, the carrying capacity is provided by the overall structure formed by multi-bucket before soil failure. Compared with the conventional single-bucket foundation, there are mainly tension and pressure that are applied to the multi-bucket foundation, so that the carrying capacity of the foundation can be fully utilized. The probability of soil failure can be well reduced with the proposed multi-bucket foundation, and the stress transmission of force-transferring structure is more consistent through steel beams with variable cross-section.

Keywords

offshore wind power / multi-bucket foundation / rotation point / force-transferring structure

References

[1] Huang W, Liu J, Zhao Zhanhua. The state of the art of study on offshore wind turbine structures and its development[J]. The Ocean Engineering, 2009, 27(2): 130-134.

[2] Luan M, Sun X, Tang X, et al. Lateral bearing capacity of multi-bucket foundation in soft ground[J]. China Ocean Engineering, 2010, 24(2): 333-342.

[3] Luan M, Fan Q, Yang Qing. Numerical analysis of ultimate pull-out resistance of suction caissons in inhomogeneous soft foundation[J]. Chinese Journal of Geotechnical Engineering, 2007, 29(7): 1054-1059.

[4] Fan Q, Luan Maotian. Failure envelopes of bucket foundation for offshore wind turbines in V-H-T loading space[J]. China Civil Engineering Journal, 2010, 43(4): 113-118.

[5] Wu K, Luan M, Fan Q, et al. Failure envelopes of bucket foundation subjected to combined loads[J]. Chinese Journal of Geotechnical Engineering, 2008, 30(4): 574-580.

[6] Ding H, Yu R, Zhang P, et al. Optimal design for prestress of large-scale bucket foundation for offshore wind turbine[J]. Journal of Tianjin University, 2012, 45(6): 473-480.

[7] Ding H, Zhu Q, Zhang Puyang. Dynamic simulation on collision between ship and offshore wind turbine[J]. Transactions of Tianjin University, 2014, 20(1): 1-6.

[8] Le C, Ding H, Zhang Puyang. Air-floating towing behaviors of multi-bucket foundation platform[J]. China Ocean Engineering, 2013, 27(5): 645-658.

[9] Zhang P, Ding H, Li Fang. Study on soil liquefaction of bucket foundation of offshore wind turbine[J]. Acta Energiae Solaris Sinica, 2013, 34(9): 1587-1593.

[10] Ding H, Li Z, Lian J, et al. Soil reinforcement experiment inside large-scale bucket foundation in muddy soil[J]. Transactions of Tianjin University, 2012, 18(3): 168-172.

[11] Kim S-R, Le Hung C, Oh Myounghak. Group effect on bearing capacities of tripod bucket foundations in undrained clay[J]. Ocean Engineering, 2014, 79: 1-9.

[12] Le Chi H, Sung R Kim. Evaluation of vertical and horizontal bearing capacities of bucket foundations in clay[J]. Ocean Engineering, 2012, 52: 75-82.

[13] China Renewable Energy Engineering Institute. FD 003–2007 Design Regulations on Subgrade and Foundation for Wind Turbine Generator System[S]. 2007, Beijing, China: China Water & Power Press.

[14] Britta B, Christophe G, Mark J C, et al. Numerical modelling of a hybrid skirted foundation under combined loading[J]. Computers and Geotechnics, 2012, 45: 127-139.

[15] Barari A, Ibsen L B. Undrained response of bucket foundations to moment loading[J]. Applied Ocean Research, 2012, 36: 12-21.

[16] Lian J, Sun L, Zhang J, et al. Bearing capacity and technical advantages of composite bucket foundation of offshore wind turbines[J]. Transactions of Tianjin University, 2011, 17(2): 132-137.