Design-oriented thermodynamic analysis of novel heat-integrated C5 isomeride distillation scheme on pilot scale

Abstract

A novel heat-integrated distillation scheme on pilot scale for producing C5 foaming agent, a mixture of isopentane and pentane in a certain proportion, was proposed with the aid of process simulation. Compared with the conventional distillation scheme, C5 foaming agent was directly separated at the top of the original isopentane or pentane column in the novel scheme, instead of first refining the two isomerides to high purities and then mixing them into final products. This improvement reduced the difficulty of the separation and avoided meaningless exergy loss caused by re-mixing, which finally contributed to an energy-efficient design by a big margin. Moreover, the column grand composite curves(CGCCs)were used to modify all distillation columns, indicating that there is potential to improve the energy efficiency further. Therefore, double-effect, or heat-integrated distillation was also adopted. Energy and exergy analyses were then conducted to evaluate the effectiveness of the proposed scheme for the purpose of energy saving. The simulation results of the conventional distillation scheme were in agreement with its on-site counterpart. Analyses showed that the novel heat-integrated scheme reduced hot utility by 27.12%,, cold utility by 24.49%,, and total exergy loss by 23.95%,.

Keywords

C5 foaming agent / process simulation / energy saving / column grand composite curve(CGCC) / exergy analysis

References

[1] Ma Fei, Zhang Jing, Wang Yulin et al. Energy-Saving Process with Pressure Thermally Coupled Distillation Technology for Producing High Purity Pentane: CN, 201010253366.1[P]. 2011-01-05(in Chinese).

[2] Sun Jinsheng, Gao Hong, Wang Yanhong et al. A Method System of Double-Effect Distillation for Separating Pentane Isomers: CN, 200910069668.0[P]. 2009-12-06(in Chinese).

[3] Li Chong, Wang Fang, Miao Xiangyang et al. An Energy-Saving Process for Producing High Purity Pentane and Foaming Agent: CN, 200610014353.2[P]. 2007-02-28(in Chinese).

[4] Bakhtiari B, Fradette L, Legros R, et al. Retrofit of absorption heat pumps into manufacturing processes: Implementation guidelines[J]. Can J Chem Eng, 2010, 88(5): 839-848.

[5] Nakaiwa M, Huang K, Endo A, et al. Internally heat integrated distillation columns: A review[J]. Chem Eng Res Des, 2003, 81(1): 162-177.

[6] Kim Y H. Internally heat-integrated distillation system for quaternary separation[J]. Chem Eng Res Des, 2001, 89(12): 2495-2500.

[7] Usman M A, Ajayi T O, Famoriyo K I. Comparison of vapor recompression and thermal coupling for energy reduction in binary distillation[J]. Journal of Emerging Trends in Engineering and Applied Sciences, 2012, 3(1): 188-194.

[8] Ajayi T O, Usman M A, Adeleye O O. Available options for the knockdown of energy consumption in distillation columns [J]. Journal of the Nigerian Society of Chemical Engineers, 1999, 18(1): 1-12.

[9] Engelien H K, Skogestad S. Multi-effect distillation applied to an industrial case study[J]. Chem Eng Process, 2005, 44(8): 819-826.

[10] Dias M O S, Modesto M, Ensinas A V, et al. Improving bioethanol production from sugarcane: Evaluation of distillation, thermal integration and cogeneration systems[J]. Energy, 2011, 36(6): 3691-3703.

[11] Bessa L C B A, Batista F R M, Meirelles A J A. Doubleeffect integration of multicomponent alcoholic distillation columns[J]. Energy, 2012, 45(1): 603-612.

[12] Kotas T J. The Exergy Method of Thermal Plant Analysis[M], 1985, London, UK: Paragon Publishing.