Reduction of vibration noise for amorphous metal alloy core distribution transformer

Abstract

To understand the vibration noise behaviors of amorphous metal alloy core distribution transformer (AMACDT), a 10 kVA prototype was tested under no-load and short-circuit conditions, respectively. The vibration characteristics were described when rated voltage was applied to the secondary side, and the primary side was connected with different load resistances. The largest amplitude positions on the upper bracket and tank surfaces were recorded by vibration sensors arranged on the surface. A data-acquisition platform was set up for signal measurement. The vibration amplitude related to frequency was discussed, and experimental results indicated that the position with the largest amplitude accrued in the middle of the upper bracket and tank surface, at phases a and c, respectively. The experimental results suggest that magnetostrictive and electrodynamic forces play a major role in exciting the vibration noise. At the same time, some rib-reinforcements were welded on the upper bracket and tank surfaces to lessen the vibration energy, which reduced the noise.

Keywords

distribution transformer / magnetostriction / electrodynamic force / amorphous metal core / vibration / noise transmission

References

[1] Hasegawa R, Azuma D. Impacts of amorphous metalbased transformers on energy efficiency and environment [J]. Journal of Magnetism and Magnetic Materials, 2008, 320(20): 2451-2456.

[2] Nathasingh D M, Liebermann H H. Transformer applications of amorphous alloys in power distribution systems [J]. IEEE Transactions on Power Delivery, 1987, 2(3): 843-850.

[3] Takahashi K, Azuma D, Hasegawa R. Acoustic and soft magnetic properties in amorphous alloy-based distribution transformer cores [J]. IEEE Transactions on Magnetics, 2013, 49(7): 4001-4004.

[4] Yang B J. Design of low noise transformer[J]. Transformer, 1990, 27(11): 10-11.

[5] Ghalamestani S G, Hilgert Tom G D, Vandevelde L, et al. Magnetostriction measurement by using dual heterodyne laser interferometers [J]. IEEE Transactions on Magnetics, 2010, 46(2): 505-508.

[6] Chang Y H, Hsu C H, Tseng C P. Magnetic properties improvement of amorphous cores using newly developed step-lap joints [J]. IEEE Transactions on Magnetics, 2010, 46(6): 1791-1794.

[7] García B, Burgos J C, Alonso Á M M. Transformer tank vibration modeling as a method of detecting winding deformations-Part I: Theoretical foundation[J]. IEEE Transactions on Power Delivery, 2006, 21(1): 157-163.

[8] Yao X G, Phway T, Moses A J, et al. Magneto-mechanical resonance in a model 3-phase 3-limb transformer core under sinusoidal and PWM voltage excitation [J]. IEEE Transactions on Magnetics, 2008, 44(11): 4111-4114.

[9] Somkun S, Moses A J, Anderson P I, et al. Magnetostriction anisotropy and rotational magnetostriction of a nonoriented electrical steel [J]. IEEE Transactions on Magnetics, 2010, 46(2): 302-305.

[10] Azuma D, Hasegawa R. Audible noise from amorphous metal and silicon steel-based transformer core [J]. IEEE Transactions on Magnetics, 2008, 44(11): 4104-4106.

[11] Bartoletti C, Desiderio M, Carlo D D, et al. Vibro-acoustic techniques to diagnose power transformers [J]. IEEE Transactions on Power Delivery, 2004, 19(1): 221-229.

[12] Mae A, Harada K, Ishihara Y, et al. A study of characteristic analysis of the three-phase transformer with step-lap wound-core [J]. IEEE Transactions on Magnetics, 2002, 38(2): 829-832.

[13] Weiser B, Pfützner H, Anger J. Relevance of magnetostriction and forces for the generation of audible noise of transformer cores [J]. IEEE Transactions on Magnetics, 2000, 36(5): 3759-3777.

[14] García B, Burgos J C, Alonso Á M M. Transformer tank vibration modeling as a method of detecting winding deformations-Part II: Experimental verification [J]. IEEE Transactions on Power Delivery, 2006, 21(1): 164-169.

[15] Fahy M, Tiernan S. Finite element analysis of ISO tank containers [J]. Journal of Materials Processing Technology, 2001, 119(12): 293-298.

[16] Snell D. Measurement of noise associated with model transformer cores [J]. Journal of Magnetism and Magnetic Materials, 2008, 320(20): 535-538.

[17] Ilo A. Behavior of transformer cores with multistep-lap joints[J]. IEEE Power Engineering Review, 2002, 22(3): 42-47.

[18] Zhu L H, Yan Q X, Yan R G, et al. Numerical computation for a new way to reduce vibration and noise due to magnetostriction and magnetic forces of transformer cores [J]. Journal of Applied Physics, 2013, 113(17): 17A333.

[19] Chang Y H, Hsu C H, Lin H W, et al. Reducing audible noise for distribution transformer with HB1 amorphous core [J]. Journal of Applied Physics, 2011, 109(7): 07A318.

[20] Chang Y H, Hsu C H, Chu H L, et al. Magnetomechanical vibrations of three-phase three-leg transformer with different amorphous-cored structures [J]. IEEE Transactions on Magnetics, 2011, 47(10): 2780-2783.

[21] Weiner M. Magnetostrictive offset and noise in flux gate magnetometers[J]. IEEE Transactions on Magnetics, 1969, 5(2): 98-105.

[22] Du B X, Liu D S. Dynamic behavior of magnetostrictioninduced vibration and noise of amorphous alloy cores [J]. IEEE Transactions on Magnetics, 2015, 51(4): 7208708

[23] Mouhamad M, Elleau C, Mazaleyrat F, et al. Short-circuit withstand tests of metglas 2605SA1-based amorphous distribution transformers[J]. IEEE Transactions on Magnetics, 2011, 47(10): 4489-4492.

[24] Garcia B, Burgos J C, Alonso A. Winding deformations detection in power transformers by tank vibrations monitoring [J]. Electric Power Systems Research, 2005, 74(1): 129-138.