Influential factors of bucket foundation for offshore wind turbine

Hongyan Ding , Yonggang Liu , Puyang Zhang , Kangping Xiong

Transactions of Tianjin University ›› 2015, Vol. 21 ›› Issue (3) : 264 -268.

PDF
Transactions of Tianjin University ›› 2015, Vol. 21 ›› Issue (3) : 264 -268. DOI: 10.1007/s12209-015-2499-4
Article

Influential factors of bucket foundation for offshore wind turbine

Author information +
History +
PDF

Abstract

In this paper, the influential design factors of wide-shallow composite bucket foundation for 3 MW offshore wind turbine are systematically studied by numerical simulation. The results show that the bucket diameter is larger than 27 m in general, and the range of 7–12 m is appropriate for cylinder height. In particular, the bucket foundation with diameter of 30 m and cylinder height of 10 m is suitable for most soils. Under ultimate loads, the bucket diameter and elasticity modulus of soil have major effects on the deformability of bucket foundation, while the influence of friction coefficient between the bucket and soil is relatively slight.

Keywords

offshore wind turbine / bucket foundation / tilt angle / soil parameter / influential factor

Cite this article

Download citation ▾
Hongyan Ding, Yonggang Liu, Puyang Zhang, Kangping Xiong. Influential factors of bucket foundation for offshore wind turbine. Transactions of Tianjin University, 2015, 21(3): 264-268 DOI:10.1007/s12209-015-2499-4

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Byrne B W, Houlsby G T. Foundation for offshore wind turbines[J]. Philosophical Transactions of the Royal Society of London, 2003, 361(1813): 2909-2930.

[2]

Ding H, Yu R, Zhang P, et al. Optimal design for prestress of large-scale bucket foundation for off-shore wind turbine[J]. Journal of Tianjin University, 2012, 45(6): 473-480.

[3]

Lian J, Ding H, Zhang P, et al. Design of large-scale prestressing bucket foundation for offshore wind turbines[J]. Transactions of Tianjin University, 2012, 18(2): 79-84.

[4]

China Renewable Energy Engineering Institute. FD 003-2007 Design Regulations on Subgrade and Foundation for Wind Turbine Generator System[S]. 2007, Beijing, China: China Water & Power Press.

[5]

Song Xiaoping. Foundation Load of XEMC Windpower XE93-2000 Model Wind Turbine[R], 2010, Hunan, China: XEMC WINDPOWER CO. LTD.

[6]

Jiang Mingyuan. Foundation Load Calculation of GOLDWIND 121/3000 Direct-Drive Wind Turbine[R], 2014, Xinjiang, China: Xinjiang Goldwind Sci & Tech Co. Ltd.

[7]

Liu K, Zhao C, Wang J, et al. Cyclic accumulative deformation of bucket foundation on soft clay strata[J]. Rock and Soil Mechanics, 2009, 30(7): 2037-2042.

[8]

Ding H, Li Z, Lian J, et al. Soil reinforcement experiment inside large-scale bucket foundation in muddy soil[J]. Transactions of Tianjin University, 2012, 18(3): 169-172.

[9]

Simulia. ABAQUS Analysis User’s Manual[M], 2007, USA: Dassault Systèmes.

[10]

Du J, Ding H, Liu J, et al. Research on boundary selection of soil of bucket foundation with finite element analysis[J]. Ocean Technology, 2005, 24(2): 109-113.

[11]

Zhang P, Ding H, Le C, et al. Towing characteristics of large-scale composite bucket foundation for offshore wind turbines[J]. Journal of Southeast University (English Edition), 2013, 29(3): 300-304.

[12]

Zhang P, Ding H, Le C, et al. Motion analysis on integrated transportation technique for offshore wind turbines[J]. Journal of Renewable and Sustainable Energy, 2013, 5(5): 053117

AI Summary AI Mindmap
PDF

112

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/