Numerical and experimental study on nugget formation process in resistance spot welding of aluminum alloy

Abstract

The weld nugget formation in the resistance spot welding (RSW) of aluminum alloy was investigated in the present study. The nugget formation process was directly observed by using a digital high-speed camera. Numerical simulation was also employed to investigate the nugget formation process. The results showed that for the RSW of two aluminum alloy sheets, a nugget was first formed in the workpiece/workpiece (W/W) interface and grew along the radial direction and axial direction of the sheets, and then it became a large elliptical nugget. For the RSW of three aluminum alloy sheets, two small nuggets were firstly formed in two W/W interfaces and grew along the axial direction and radial direction; finally they fused into one nugget. Besides, there existed a critical welding time, after which the nugget size remained nearly unchanged. This indicates that a long welding time is unnecessary for the RSW of aluminum alloy. In addition, the calculated nugget radius was compared with the experimental results, which showed that the simulation results agreed well with the experimental results.

Keywords

resistance spot welding / aluminum alloy / nugget formation / high-speed photography / numerical simulation

References

[1] Gould J E. Examination of nugget development during spot welding using both experimental and analytical techniques[J]. Welding Journal, 1987, 66(1): 1s-10s.

[2] Eisazadeh H, Hamedi M, Halvaee A. New parametric study of nugget size in resistance spot welding process using finite element method[J]. Materials and Design, 2010, 31(1): 149-157.

[3] Li Y B, Lin Z Q, Shen Q. Numerical analysis of transport phenomena in resistance spot welding process[J]. ASME Journal of Manufacturing Science and Engineering, 2011, 133: 031019

[4] Moshayedi H, Sattari-Far Iradj. Numerical and experimental study of nugget size growth in resistance spot welding of austenitic stainless steels[J]. Journal of Materials Processing Technology, 2012, 212(2): 347-354.

[5] De A. Finite element modeling of resistance spot welding of aluminum with spherical tip electrodes[J]. Science and Technology of Welding and Joining, 2002, 7(2): 119-124.

[6] Hamedi M, Pashazadeh H. Numerical study of nugget formation in resistance spot welding[J]. International Journal of Mechanics, 2008, 2(1): 11-15.

[7] Khan J A, Xu L, Chao Y J. Prediction of nugget development during resistance spot welding using coupled thermal-electrical-mechanical model[J]. Science and Technology of Welding and Joining, 1999, 4(4): 201-207.

[8] Upthegrove W R, Key J F. A high speed photographic analysis of spot welding galvanized steel[J]. Welding Journal, 1972, 51(5): 233s-244s.

[9] Kim E W, Eagar T W. Measurement of transient temperature response during resistance spot welding[J]. Welding Journal, 1989, 68(8): 303s-312s.

[10] Cho Y, Rhee S. Experimental study of nugget formation in resistance spot welding[J]. Welding Journal, 2003, 82(8): 195s-201s.