Combined cycle fatigue testing with ultrasonic frequency component of S350 steel welded joint

Yang Liu; Dongpo Wang; Caiyan Deng; Liangchen Wu; Danqing Yin; Baoming Gong

doi:10.1007/s12209-014-2199-5

Transactions of Tianjin University ›› 2014, Vol. 20 ›› Issue (6) : 435 -438. DOI: 10.1007/s12209-014-2199-5

Article

Combined cycle fatigue testing with ultrasonic frequency component of S350 steel welded joint

Yang Liu ¹^,²
, Dongpo Wang ¹^,²
, Caiyan Deng ¹^,²
, Liangchen Wu ¹^,²
, Danqing Yin ³
, Baoming Gong ¹^,²^,^f

Author information +

History +

PDF

Abstract

A combined cycle fatigue (CCF) testing system with ultrasonic frequency component was developed to evaluate the CCF properties of S350 steel welded joints in this study. The fatigue testing results indicated that the S-N curves of CCF did not have fatigue limit, which agreed with those of pure high frequency fatigue of welded joints. The S-N curves showed that the CCF strength of welded joints dropped greatly with the increasing interaction between high and low frequency fatigue loading. An approximation design method of CCF was presented using amplitude envelope as the stress range.

Keywords

fatigue / welded joint / combined cycle fatigue / ultrasonic frequency

Cite this article

Download citation ▾

Yang Liu, Dongpo Wang, Caiyan Deng, Liangchen Wu, Danqing Yin, Baoming Gong. Combined cycle fatigue testing with ultrasonic frequency component of S350 steel welded joint. Transactions of Tianjin University, 2014, 20(6): 435-438 DOI:10.1007/s12209-014-2199-5

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Hobbacher A. Recommendations on Fatigue Design of Welded Joints and Components XIII-1539-96/XV-845-96[S]. 2002

[2]	Mazur Z, Hernández-Rossette A, Porcayo-Calderón J. Fatigue investigation of the 69 MW gas turbine of a combined cycle unit[C]. ASME Turbo Expo 2010: Power for Land, Sea and Air. Glasgow, UK, 2010 481-489.

[3]	Roder O, Peters J O, Thompson A W, et al. Influence of simulated foreign object damage on the high-cycle fatigue properties of Ti-6Al-4V for gas turbine blades[C]. The 4th National Turbine Engine High Cycle Fatigue Conference. Monterey, USA, 1999

[4]	Cowles B A. High cycle fatigue in aircraft gas turbines: An industry perspective[J]. International Journal of Fracture, 1996, 20(1): 82-83.

[5]	Hawkyard M, Powell B E, Hussey I, et al. Fatigue crack growth under the conjoint action of major and minor stress cycles[J]. Fatigue and Fracture of Engineering Materials and Structures, 1996, 19(2–3): 217-227.

[6]	Namjoshi S A, Mall S. Fretting behavior of Ti-6Al-4V under combined high cycle and low cycle fatigue loading [J]. International Journal of Fatigue, 2001, 23(Suppl1): S455-S461.

[7]	Dungey C, Bowen P. The effect of combined cycle fatigue upon the fatigue performance of Ti-6Al-4V fan blade material [J]. Journal of Materials Processing Technology, 2004, 153–154(1–3): 374-379.

[8]	Byrne J, Hall R F, Ding J, et al. Fatigue crack growth from foreign object damage under combined low and high cycle loading (Part I): Experimental studies [J]. International Journal of Fatigue, 2007, 29(7): 1339-1349.

[9]	Mendia L, Estensoro F J, Mary C, et al. Effect of combined cycle fatigue on Ti6242 fatigue strength[C]. The 11th International Conference on the Mechanical Behavior of Materials (ICM11). Como, Italy, 2011 1809-1814.

[10]	Schweizer C, Seifert T, Nieweg B, et al. Mechanisms and modeling of fatigue crack growth under combined low and high cycle fatigue loading[J]. International Journal of Fatigue, 2011, 33(2): 194-202.

[11]	Zhao X, Wang D, Deng C, et al. The fatigue behaviors of butt welds ground flush in the superlong life regime[J]. International Journal of Fatigue, 2012, 36(1): 1-8.