Dynamic simulation on collision between ship and offshore wind turbine

Abstract

By using ABAQUS/Explicit, the dynamic process of an offshore wind turbine(OWT) stricken by a ship of 5000DWT in the front direction is simulated. The OWT is located on a large-scale prestressing bucket foundation constructed by an integrated installation technique. According to the simulation results, under the ship collision, a certain range of plastic zone appears within a local area of arc transition structure of the bucket foundation, and the concrete plastic zone is seriously damaged. As the stress level of OWT tower is relatively low, the OWT tower is less affected. A great inertial force is generated at the top of the OWT tower as the mass of nacelle and blades is up to 400 t. The displacement of the tower is in the opposite direction of the ship collision at the end of 1 s under the action of inertial force. There is only a minor damage in the ship bow. Most of the kinetic energy is transformed into the plastic dissipation and absorbed by the arc transition structure of bucket foundation.

Keywords

offshore wind turbine / large-scale prestressing bucket foundation / ship collision / ABAQUS/Explicit / concrete damaged plasticity

References

[1] Henderson A R, Morgan C, Smith B, et al. Offshore wind energy in Europe—A review of the state-of-the-art [J]. Wind Energy, 2003, 6(1): 35-52..

[2] Dvorak M J, Archer C L, Jacobson M Z. California offshore wind energy potential [J]. Renewable Energy, 2010, 35(6): 1244-1254..

[3] Biehl F, Lehmann E. Collision of ships and offshore wind turbine: Calculations and risk evaluation [C]. 25th International Conference on Offshore Mechanics and Arctic Engineering, 2006, Germany: Hamburg.

[4] Li Y, Hu Z, Zou Zaojian. Structural dynamic response analysis of an offshore wind turbine stricken by a ship in lateral direction [J]. Journal of Vibration and Shock, 2010, 29(10): 122-126.

[5] Ren N, Ou Jinping. A crashworthy device against ship-OWT collision and its protection effects on the tower of offshore wind farm [J]. China Ocean Engineering, 2009, 23(4): 593-602..

[6] Ren N, Ou Jinping. Dynamic numerical simulation for ship-OWT collision [C]. th International Conference on Reliability, Maintainability and Safety, 2009, China: Chengdu.

[7] Lian J, Ding H, Zhang P, et al. Design of large-scale prestressing bucket foundation for offshore wind turbines [J]. Transactions of Tianjin University, 2012, 18(2): 79-84..

[8] Ding H, Li Z, Lian J, et al. Soil reinforcement experiment inside large-scale bucket foundation in muddy soil [J]. Transactions of Tianjin University, 2012, 18(3): 168-172..

[9] DNV-OS-J101. Design of Offshore Wind Turbine Structures [S]. 2010.

[10] DNV-RP-C204. Design Against Accidental Loads [S]. 2010.

[11] Dassault Systemes. ABAQUS User’s Manuals [M]. Version 6. 10. Providence, USA, 2010.

[12] Graczykowski C, Heinonen J. Feasibility study of adaptive inflatable structures for protecting wind turbines [J]. Journal of Structural Mechanics, 2007, 40(2): 7-23..

[13] Zhu B, Chen Y, Leung A Y T. Analysis of collision protection for ocean and offshore structures [J]. China Ocean Engineering, 2006, 20(3): 361-372..

[14] Li Y, Hu Z, Zou Zaojian. Influence of initial speed on the anti-collision characteristic of offshore wind turbines [J]. Journal of Jiangsu University of Science and Technology (Natural Science Edition), 2010, 24(3): 213-216.

[15] GB 50010.2010. Code for Design of Concrete Structures [S]. 2010(in Chinese).

[16] Li Yanzhen. Numerical Simulation Study of Offshore Wind Turbine Stricken by Ship [D]. 2010, Shanghai, China: Shanghai Jiaotong University.