Compensation of dead-time effect of speed sensorless vector control system

Abstract

The key of speed sensorless vector control system lies in the accurate orientation of magnetic field. In some field-oriented algorithms, the integrator of observers and the dead-time effect bring in system errors during the estimation of field position. In this paper, a saturated feedback integrator is used, and the dead-time effect is compensated by current positive feedback. Experiments were carried out on the hardware platform of MCK2407, with chip TMS320LF2407 from TI Company. The results show that the proposed method is simple and effective, and the accuracy of field position is improved.

Keywords

induction motor / speed sensorless / vector control / DSP / compensation / dead-time / field orientation

References

[1] Chen B., Xie Hongming. The control strategies of AC drives[J]. Transactions of China Electrotechnical Society, 2000, 15(5): 11-15.

[2] Kazuhiro O., Teruo H., Greg A., et al. Experimental verification for stability improvement of sensorless vector control system of induction motor using real-time tuning of observer gain[J]. Electrical Engineering in Japan, 2009, 166(1): 67-81.

[3] Xue X., Li G., Xia C., et al. Research on the method of dead-time decoupling control for PWM inverters[J]. Power Electronics, 1998, 32(2): 21-24.

[4] Liu Jianmin, Kai Pingan. A new control method with applications for dead time systems[C]. In: Proceedings of 2010 Chinese Control and Decision Conference. Xuzhou, China, 2010. 1097–1101.

[5] Hwang S. H., Kim J. M. Dead time compensation method for voltage-fed PWM inverter[J]. IEEE Transactions on Energy Conversion, 2010, 25(1): 1-10.

[6] Raute R., Caruana C., Staines C. S., et al. Analysis and compensation of inverter nonlinearity effect on a sensorless PMSM drive at very low and zero speed operation[J]. IEEE Transactions on Industrial Electronics, 2010, 57(12): 4065-4074.

[7] Murai Y., Watanabe T., Iwasaki H. Waveform distortion and correction circuit for PWM inverters with switching lagtimes[J]. IEEE Transactions on Industry Applications, 1987, 23(5): 881-886.

[8] Liu Xu, Ruan Yi, Zhang Chaoyi et al. On speed sensorless vector control system for induction motor based on estimating speed by torque current differential[C]. In: Proceedings of the 27th Chinese Control Conference. Kunming, China, 2008. 169-173.

[9] Yan Qing, Wan Shuyun, Zhang Xiaoguang et al. The principle and implementation of the compensation for dead time effect in inverter system[J]. Electric Drive, 1996 (6): 7–9.

[10] Jabbar M. A., Khambadkone A. M., Zhang Yanfeng. Space-vector modulation in a two-phase induction motor drive for constant-power operation[J]. IEEE Transactions on Industrial Electronics, 2004, 51(5): 1081-1088.

[11] Joachim H. Sensorless speed and position control of induction motor drives[C]. In: 27th Annual Conference of the IEEE Industrial Electronics Society. Denver, USA, 2003. 1547–1562.

[12] Jin Hui, Zhao Yueling, Wang Dazhi. Simulation study of AC motor speed sensorless vector control system based on SVPWM[C]. In: 2009 9th International Conference on Hybrid Intelligent Systems. Shenyang, China, 2009. 524–528.

[13] Mongkol, Konghirun. Fast-transient Current Control Strategy and Other Issues for Vector Controlled AC Drives[D]. The Ohio State University, 2003.

[14] Wang W., Li Y., Wang G., et al. Speed sensorless vector control system of induction motor based on PI adaptive mechanism[J]. Transactions of China Electrotechnical Society, 2002, 17(1): 1-6.

[15] Zou J., Xu Z., Sun Kai. N. ovel sensorless vector control system of induction machine based on flux observer in field weakening[J]. Transactions of Tianjin University, 2006, 12(1): 1-5.