Technological parameters for preparation and granulation of ammonium ion-exchange material
Qiongqiong Liu , Xin Tan , Luhua You , Shejiang Liu , Lin Zhao
Transactions of Tianjin University ›› 2011, Vol. 17 ›› Issue (2) : 118 -124.
Technological parameters for preparation and granulation of ammonium ion-exchange material
As a raw material, kaolin was modified to prepare a high-performance ammonium ion-exchange material. According to cation-exchange capacity (CEC) measurement, the prepared ammonium ion-exchange material has an ammonium ion-exchange capacity greater than 75 mg /g and can be used to remove ammonia nitrogen in water treatment. A pharmaceutical extruder-rounder was used to study the effects of granulation process. Polyethylene glycol-6000 (PEG-6000) was used as the pore-forming agent and calcining temperature of 650 °C was used as the optimal condition. NMR data indicate that 27Al is mainly converted from hexa-coordinated Al to tetra-coordinated Al during the modification. Compared with 29Si in the original kaolin, 29Si in the modified kaolin does not have an obvious change. A comparison of the data with Langmuir and Freundlich isotherm models shows a good correlation. The Freundlich model describes the process more accurately, and the adsorption process of ammonia nitrogen in water with the ammonium ion-exchange material closely matches the pseudo-second-order reaction.
kaolin / ammonia / modification / granulation / surface area
| [1] |
|
| [2] |
|
| [3] |
|
| [4] |
|
| [5] |
|
| [6] |
|
| [7] |
|
| [8] |
|
| [9] |
|
| [10] |
|
| [11] |
|
| [12] |
|
| [13] |
|
| [14] |
|
| [15] |
|
| [16] |
|
/
| 〈 |
|
〉 |