Loading system for full-scale heavy-duty support node test with multi-directional loading requirements

Abstract

This paper presents the design, analysis and experimental study of a loading system for heavy-duty nodes test based on a large-scale multi-directional in-plane loading device, which has been used in a full-scale heavy-duty support node test. Test loads of the support reached 6 567 kN with multi-directional loading requirements, which outrange the capacity of the available loading devices. Through the reinforcement of a large-scale multi-directional in-plane loading device, the innovative design of a self-balanced load transferring device, and other arrangement considerations of the loading system, the test was implemented and the loading capacity of the ring was considerably enlarged. Due to the heavy loading requirements, some checking computations of the ring and the load transferring device outranged the limit of the Chinese national code “Code for Design of Steel Structures (GB 50017—2003)”, thus elastic-plastic finite element (FE) analysis was carried out on the two devices, and also the real-time monitoring on the whole loading systems during experiments to ensure test safety. FE analysis and test results show that the loading system worked elastically during experiments.

Keywords

loading system / self-balanced design / multi-directional loading / heavy-duty node

References

[1] Zhai Hong. Experimental Research on Hysteretic Property of Large Diameter Space KK Type Tubular Joints[D]. 2003, Shanghai, China: College of Civil Engineering, Tongji University.

[2] Niu Dongsheng. PTA pile transfer function analyzer[J]. Building Technique Development, 1993, 20(2): 33-35.

[3] Zhang J., Zhang W., Zhang Yaochun. Study and execution of the multi-functional experimental facility[J]. Industrial Construction, 2004, 34(3): 40-43.

[4] Liu X., Lin Yan. The engineering application and research of cast steel joints[J]. Progress in Steel Building Structures, 2004, 6(1): 12-19.

[5] de Oliveira J A C, Willibald S, Packer J et al. Cast steel nodes in tubular construction: Canadian experience[C]. In: Proc 11th Int Symp and IIW Int Conf on Tubular Structures. Quebec City, Quebec, Canada, 2006. 523–529.

[6] Schober Hans. Steel castings in architecture and engineering[C]. In: NASCC Proceedings. Baltimore, MD, USA, 2003. 1–23.

[7] Wei X., Li J., Qiang Shizhong. Full-scale experiment on spherical cast-steel joint of long span reticulated shells [J]. Journal of Southwest Jiaotong University, 2004, 39(4): 428-432.

[8] Li J., Wei X., Li X., et al. Experiment of complex loading on the cast steel joint of large steel-reticulated shell structure[J]. China Civil Engineering Journal, 2005, 38(6): 8-14.

[9] Zhao C., Ma H., Zhao Huilin. Experimental research of cast-steel joints at bottom of bifurcated columns [J]. Building Science, 2007, 23(11): 35-38.

[10] CECS 235 Technical Specification for Application of Connections of Structural Steel Casting[S]. 2008, Beijing, China: China Planning Press.

[11] Zhang S., Gong C., Wang Y., et al. Performance analysis of heavy duty cast steel supports for structures with a large span steel roof [J]. Journal of Harbin Engineering University, 2010, 31(5): 589-595.

[12] GB/T 1591—94 High Strength Low Alloy Structural Steel [S]. 1994(in Chinese).

[13] GB 50017—2003 Code for Design of Steel Structures[S]. China Planning Press, Beijing, China, 2003(in Chinese).

[14] Moaveni S. Finite Element Analysis: Theory and Application with ANSYS [M]. 1999, NJ, USA: Prentice Hall.

[15] Stolarski Tadeusz, Nakasone Y, Yoshimoto S. Engineering Analysis with ANSYS Software[M]. Butterworth Heinemann, 2006.