Balance mechanism design of single cylinder engine based on continuous mass distribution of connecting rod

Chen Yang; Zhiyong Hao; Guangtai Zheng

doi:10.1007/s12209-009-0045-y

Transactions of Tianjin University ›› 2009, Vol. 15 ›› Issue (4) : 255 -259. DOI: 10.1007/s12209-009-0045-y

Article

Balance mechanism design of single cylinder engine based on continuous mass distribution of connecting rod

Author information +

History +

PDF

Abstract

For a single cylinder engine, the total unbalanced inertial forces occur in the engine block, which results in engine’s vibration and deteriorated noise. In order to eliminate the unbalanced forces, counterweight and primary balance shaft should be attached to the cylinder block so that engine durability and ride comfortability may be further improved. Traditionally one third of connecting rod assembly’s mass is treated as reciprocating mass, and two thirds as rotating mass when designing balance mechanism. In this paper, a new method based on the multibody dynamics simulation is introduced to separate the reciprocating mass and rotating mass of connecting rod assembly. The model consists of crankshaft, connecting rod, piston and the simulation is performed subsequently. According to the simulation results of the main bearing loads, the reciprocating mass and rotating mass are separated. Finally a new balance mechanism is designed and simulation results show that it completely balances inertial forces to improve the engine’s noise vibration and harshness performance.

Keywords

multibody dynamics / reciprocating inertial force / rotating inertial force / primary balance shaft

Cite this article

Download citation ▾

Chen Yang, Zhiyong Hao, Guangtai Zheng. Balance mechanism design of single cylinder engine based on continuous mass distribution of connecting rod. Transactions of Tianjin University, 2009, 15(4): 255-259 DOI:10.1007/s12209-009-0045-y

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Zissimos P Mourelatos. A crankshaft system model for structural dynamic analysis of internal combustion engines[J]. Computers and Structures, 2001(21): 2009–2027.

[2]	Nayak Nagaraj, Reddy P V, Aghav Yogesh et al. Study of engine vibration due to piston slap on single-cylinder high-powered engine[C]. SAE Paper, 2005-26-046.

[3]	Shu Gequn, Liang Xingyu, Wang Yangjun. Investigation on coupled torsional-bending vibration of crankshaft based on continuous distributed model[C]. SAE Paper, 2006-01-0880.

[4]	Carlson David, Czaplicki Michael, Riley Jon. Light-weight localized structural reinforcements for structural and NVH applications[C]. SAE Paper, 2003-01-1573.

[5]	Suh In-Soo. Combustion on radiation noise and mount vibration from a V8 gasoline engine[C]. SAE Paper, 2003-01-1730.

[6]	Kim Taeik, Jung Insoo, Han Douck et al. NVH optimization of the new 2. 5LHSDI diesel engine with common rail[C]. SAE Paper, 2003-01-0056.

[7]	Saunders Jonathan, Walker Patrick. Design and development of a novel balancing system for single and in-line twin cylinder engines[C]. SAE Paper, 2003-32-0026.

[8]	Ishihara S. Reduction of powerplant vibration level in the acceleration noise region based on analysis of crankshaft system behavior[C]. SAE Paper, 1992-2087.

[9]	Luo F., Wang Q. Reduction vibration and noise of high speed reciprocated engine with balance shafts[J]. Chinese Internal Combustion Engine Engineering, 2002, 23(1): 72 74

[10]	Suh Kwon-Hee. A study on the balancing of the three-cylinder engine with balance shaft[C]. SAE Paper, 2000-0601.

[11]	Stanley Richard. A characteristic parameter to estimate the optimum counterweight mass of a 4-cyliner in-line engine [C]. SAE Paper, 2002-0486.

[12]	Liu C Q, Orzechowski Jeff. Theoretical and practical aspects of balancing a V-8 engine crankshaft[C]. SAE Paper, 2005-01-2454.

[13]	Wang Q., Xu Z. Experimental study on testing calibration theory of inertial force for single cylinder engine[J]. Transactions of CSICE, 2005, 23(3): 283-287.