3D finite element simulation of tunnel boring machine construction processes in deep water conveyance tunnel

Abstract

Applying stiffness migration method, a 3D finite element mechanical model is established to simulate the excavation and advance processes. By using 3D nonlinear finite element method, the tunnel boring machine (TBM) excavation process is dynamically simulated to analyze the stress and strain field status of surrounding rock and segment. The maximum tensile stress of segment ring caused by tunnel construction mainly lies in arch bottom and presents zonal distribution. The stress increases slightly and limitedly in the course of excavation. The maximum and minimum displacements of segment, manifesting as zonal distribution, distribute in arch bottom and vault respectively. The displacements slightly increase with the advance of TBM and gradually tend to stability.

Keywords

water conveyance tunnel / tunnel boring machine / construction / 3D finite element method / numerical analysis / simulation

References

[1] Mair R. J., Taylor R. N. Bored tunnelling in the urban environment[C] Proceedings of 14th International Conference on Soil Mechanics and Foundation Engineering (Vol. 4), 1997, Hamburg: Balkema 2353-2385.

[2] Komiya K., Soga K., Akagi H., et al. Finite element modelling of excavation and advancement process of a shield tunneling machine[J]. Soils and Foundations, 1999, 39(3): 37-52.

[3] Swoboda G., Abu-Krisha A. Three-dimensional numerical modelling for TBM tunnelling in consolidated clay[J]. Tunnelling and Underground Space Technology, 1999, 14(3): 327-333.

[4] Zhu H., Ding W., Li X. Construction simulation for the mechanical behavior of shield tunnel and its application[J]. China Civil Engineering Journal, 2000, 33(3): 98-103.

[5] Su H. Two-dimension nonlinear FEM analysis for shield tunneling[J]. Journal of Yangtze River Scientific Research Institute, 2000, 17(4): 22-26.

[6] Wang M., Chen S. 3-dimensional nonlinear finite element simulation of tunnel structure for moving-forward shield[J]. Chinese Journal of Rock Mechanics and Engineering, 2002, 21(2): 228-232.

[7] Lin D G, Tseng C T, Phienwej N et al. 3D deformation analysis of earth pressure balance shield tunnelling in Bangkok subsoil [J]. Journal of the Southeast Asian Geotechnical Society, 2002(1): 13–27.

[8] Kasper T., Meschke G. A 3D finite element simulation model for TBM tunnelling in soft ground[J]. International Journal for Numerical and Analytical Methods in Geomechanics, 2004, 28(14): 1441-1460.

[9] Zhang H., Yin Z., Zhu J. 3D finite element simulation on deformation of soil mass during shield tunneling[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(5): 755-760.

[10] Mancinelli Dotting L. Evaluation of superficial settle ments in low overburden tunnel TBM excavation: Numerical approaches[J]. Geotechnical and Geological Engineering, 2005, 23(3): 263-271.

[11] Zhang Z., He C., She C. Three-dimensional finite element modeling of excavation and advancement processes of shield tunnel construction in Nanjing metro[J]. Journal of the China Railway Society, 2005, 27(1): 84-89.

[12] Yao Y., Zeng D., Yan Q. Analysis on the influence of shield tunnel construction to the segment ring and ground movement[J]. Journal of Southwest University of Science and Technology, 2006, 21(6): 20-25.

[13] Jiang X., Zhao Z., Li Y. Dynamic simulation of the effects of shield tunneling in Tianjin subway project on neighboring job facilities[J]. Journal of Tianjin University, 2006, 39(2): 188-193.

[14] Ding J., Jin X., Guo Y., et al. The threedimensional dynamic simulation of shield tunneling based on parallel computing[J]. Journal of Shanghai Jiaotong University, 2007, 41(1): 131-135.

[15] Mroueh H., Shahrour I. A simplified 3D model for tunnel construction using tunnel boring machines[J]. Tunnelling and Underground Space Technology, 2008, 23(1): 38-45.

[16] Liu J., Hou X. Shield Method Tunnel[M]. 1991, Beijing: China Railway Publishing House.