Test on evaluation method for biodegradability of lubricants

Abstract

Using carbon tetrachloride (CCl₄) as extraction agent, the activated sludge from Tianjin Jizhuangzi Sewage Treatment Plant as inoculum, the test study on biodegradability of lubricants was carried out. The test flasks containing the mineral medium, the test oil and the inoculum were placed in incubation together with flasks containing poisoned blanks for periods of 0 and 21 days, respectively. Flasks containing the reference materials in place of the test oil were run in parallel. At the end of the incubation period, the contents of the flasks were subjected to sonic vibration, and were acidified and extracted by using CCl₄. The extracts were then analysed by infra-red (IR) spectrometer to measure the maximum absorption of the C-H stretch of CH₂-CH₃ band at wavelength of 2 930 cm⁻¹. The absorption values were used to calculate the residual oil contents of the poisoned and test flasks. Consequently the biodegradability of the test oil was calculated. The test results indicate that the differences in the biodegradability of test materials in different tests are within 5.5%, and consistent with the data described in Coordinating European Council (CEC) L-33-A-93. The biodegradability of lubricants can be evaluated by this method effectively.

Keywords

biodegradability / lubricant / evaluating test / CEC L-33-A-93

References

[1] Battersby N. S., Morgan P.. A note on the use of the CEC L-33-A-93 test to predict the potential biodegradation of mineral oil based lubricants in soil[J]. Chemosphere, 1997, 35(8): 1773-1779.

[2] Lee S.-h., Lee S., Kim D.-y., et al. Degradation characteristics of waste lubricants under different nutrient conditions[J]. Journal of Hazardous Materials, 2007, 143(1/2): 65-72.

[3] Battersby N. S., Pack S. E., Watkinson R. J.. A correlation of the biodegradability of oil products in the CEC-L-33-T-82 and modified Sturm-tests[J]. Chemosphere, 1992, 24(12): 1989-2000.

[4] Novick N. J., Mehta P. G., McGoldrick P. B.. Assessment of the biodegradability of mineral oils and synthetic ester base stocks, using CO₂ ultimate biodegradability tests and CEC-L-33-T-82[C] Proceedings of CEC Fourth International Symposium on the Performance Evaluation of Automotive Fuels and Lubricants, 1993, Birmingham, UK: Coordinating European Council 5-7.

[5] Coordinating European Council for the Development of Performance Tests for Transportation Fuels. CEC L-33-A-93 Lubricants and Other Fluids. Biodegradability of Two-Stroke Cycle Outboard Engine Oils in Water[S]. 1995, Brussels, Belgium: Coordinating European Council.

[6] Organisation of Economic CooperationDevelopment. OECD Guideline for Testing of Chemicals: Ready Biodegradability[M]. 1992, Paris: Organisation of Economic Cooperation and Development.

[7] Yang Lihe, Xie Shiwen. Ecological assessment of green lubricating oils[J]. Lubrication Engineering, 2006 (11): 190–193(in Chinese).

[8] Andreas W.. Lubricants based on renewable resources: An environmentally compatible alternative to mineral oil products[J]. Chemosphere, 2001, 43(1): 89-98.

[9] Battersby N. S.. The biodegradability and microbial toxicity testing of lubricants: Some recommendations[J]. Chemosphere, 2000, 41(7): 1011-1027.

[10] Wilfried J. B.. Lubricants and the environment[J]. Tribology International, 1998, 31(1–3): 35-47.

[11] Peter R., Udo P., Uwe S.. A critical comparison of respirometric biodegradation tests based on OECD 301 and related test methods[J]. Water Research, 2003, 37(7): 1571-1582.