The energy from a source was rearranged through reflection or refraction by a freeform optical element in order to get the desired uniform illumination. The numerical results of first-order partial differential equation sets had been investigated to obtain the freeform optical element, and the equations could be used to get the characteristics of the light source and the desired illumination. For example, a light emitting diode (LED) with a Lambertian light emitting surface of 1 mm × 1 mm was applied as the light source. Two kinds of freeform reflectors and one freeform lens were designed for different illuminations, and the simulated uniformity was near to 90%. Considering the size of these freeform optical elements, the illumination system can be very compact and efficient if the freeform optical element is applied in the illumination system of projectors with LED as source.
DING Yi, GU Peifu
. Freeform optical element for uniform illumination[J]. Frontiers of Optoelectronics, 2008
, 1(1-2)
: 173
-177
.
DOI: 10.1007/s12200-008-0013-5
1. Jacobson B A, Gengelbach R D . Lens for uniform LED illumination:an example of automated optimization using Monte Carlo ray-tracingof an LED source. Proceedings of SPIE, 2002, 4446: 121–128. doi:10.1117/12.448810
2. Doyle S, Corcoran D, Connell J . Automated mirror design for an extended light source. Proceedings of SPIE, 1999, 3781: 94–102. doi:10.1117/12.368240
3. Winston R, Ries H . Nonimaging reflectors asfunctionals of the desired irradiance. Proceedings of SPIE, 1993, 2016: 2–11. doi:10.1117/12.161934
4. Ries H, Winston R . Tailored edge-ray reflectorsfor illumination. Journal of the Optical Society of America A, 1994, 11(4): 1260–1264
5. Ries H, Rabl A . Edge-ray principle of nonimagingoptics. Journal of the Optical Societyof America A, 1994, 11(10): 2627–2632
6. Jenkins D, Winston R . Tailored reflectors for illumination. Applied Optics, 1996, 35(10): 1669–1672
7. Ries H, Muschaweck J . Tailored freeform opticalsurfaces. Journal of the Optical Societyof America A, 2002, 19(3): 590–595. doi:10.1364/JOSAA.19.000590
8. Zhao F . Practicalreflector design and calculation for general illumination. Proceedings of SPIE, 2005, 5942: 59420J.1–59420J.9
9. Kuang L J, Zhai J H, Ruan Y, et al.. Characteristics of fly eye lens in uniform illuminationsystem. Optics & Optoelectronic Technology, 2005, 3(6): 29–31 (in Chinese)
10. Chen W H . Introduction of Differential Geometry. Beijing: Peking University Press, 1990, 101 (in Chinese)
11. Su Y C, Wu Q G . Numerical Solutions of PartialDifferential Equations. Beijing: China Meteorological Press, 1989, 2–16 (in Chinese)
12. Lee W Y, Lee Y C, Sokolov K, et al.. LED projection displays. Proceedings of SPIE, 2004, 5529: 1–7. doi:10.1117/12.559231
