ERRATUM

Effect of prism material on design of surface plasmon resonance sensor by admittance loci method

  • Kaushik BRAHMACHARI ,
  • Mina RAY
Expand
  • Department of Applied Optics and Photonics, University of Calcutta, Kolkata 700 009, India

Received date: 01 Jan 2013

Accepted date: 01 Jan 2013

Published date: 05 Sep 2013

Copyright

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg

Cite this article

Kaushik BRAHMACHARI , Mina RAY . Effect of prism material on design of surface plasmon resonance sensor by admittance loci method[J]. Frontiers of Optoelectronics, 2013 , 6(3) : 353 -353 . DOI: 10.1007/s12200-013-0323-0

Front. Optoelectron. (2013) 6(2): 185-193
The authors would like to make the following adjustments to their article.
Tab.1 Table 4 Values of SPR angle, angular shift and sensitivity for three glass materials for different samples
sample refractive indexglass prisms
BK7SF5SF11
SPR angle /(°)angular shift
/(°)
*sensitivity
/((° )∙RIU-1)
SPR angle
/(°)
angular shift/(°)*sensitivity
/((° )∙RIU-1)
SPR angle
/(°)
angular shift/(°)*sensitivity
/((° )∙RIU-1)
1.3373.680190.475161.09094.480455.3075.0195
1.3475.41.72220.264462.010.9297.925056.040.7476.8487
1.3577.253.57270.222262.961.87101.758556.781.4878.8106
1.3679.435.75383.081963.942.85106.059557.572.2780.9216
1.3781.958.27-64.973.88110.931458.373.0783.2014
1.3884.6811-66.014.92116.512359.193.8985.6734

Notes: Gold film thickness is 50 nm for all samples used here

*sensitivity is calculated using Eq. (12)

Fig.1 Fig.5(e) sensitivity vs. sample refractive index plot for three prism materials

Full size|PPT slide

Options
Outlines

/