Design of integrated-electrode tool for electrorheological finishing of optical glasses

Abstract

Electrorheological (ER) finishing utilizes the flow of electrically stiffened abrasive fluid through a preset converging gap formed by the work-piece surface and a moving tool. An ER finishing tool characterized by cathode integrated with anode together is proposed, whose electric field distribution is finite-element-analyzed (FEA) and is useful to finish both conductive work-piece and non-conductive ones. Experiments were performed to finish a K9 glass by this tool. After 30 minutes polishing, the surface roughness was reduced from 8.46 to 2.53 nm Ra which is better than previously reported 2.9 nm. The result verified the validity of the integrated-electrodes tool for non-conductive optical glasses.

Keywords

electrorheological (ER) finishing / roughness / material removal

References

[1] Golini D. Magnetorheological finishing automates precision optics fabrication. Laser Focus World, 1998, 34(9):187-190

[2] Golini D. Precision optics manufacturing using magnetorheological finishing (MRF). SPIE, 1999, 3739: 78-85

[3] Cheng H B, Feng J Z, Wang Y W, Lei S T. Magnetic bingham fluid-assisted deterministic polishing for super-smooth surfaces. Biomedical and Life Sciences, 2005, 50(2): 172-178

[4] Kordonski W I, Jacobs S D. Magnetorheological finishing. International Journal of Modern Physics, 1996, 10(23-24): 2837-2848

[5] Cheng H B, Yam Y, Wang Y T. Experimentation on MR fluid using a 2-axis wheel tool. Journal of Materials Processing Technology, 2009, 209(12-13): 5254-5261

[6] Miao C L, Shafrir S N, Lambropoulos J C, Mici J, Jacobs S D. Shear stress in magnetorheological finishing for glasses. Applied Optics, 2009, 48(13): 2585-2594

[7] Suzuki K, Ide A, Uematsu T, Kurobe T, Yasunaga N. Electrophoresis-polishing whit a partial electrode tool. In: Advances in Abrasive Technology Proceedings of the International Symposium. 1997, 48-52

[8] Seoka J, Kim Y J, Jiang K I, Min B K, Lee S J. A study on the fabrication of curved surfaces using magnetorheological fluid finishing. International Journal of Machine Tools and Manufacture, 2007, 47(14): 2077-2090

[9] Kuriyagawa T, Saeki M, Syoji K. Electrorheological fluid-assisted ultra-precision polishing for small three-dimensional parts. Precision Engineering, 2002, 26(4): 370-380

[10] Kim W B, Min B K, Lee S J. Development of a padless ultraprecision polishing method using electrorheological fluid. Journal of Materials Processing Technology, 2004, 155-156: 1293-1299

[11] Kim W B, Lee S J,Kim Y J, Lee E S. The electromechanical principle of electrorheological fluid-assisted polishing. International Journal of Machine Tools and Manufacture, 2003, 43(1): 81-88

[12] Kaku T, Kuriyagawa T, Yoshihara N. Electrorheological fluid-assisted polishing of WC micro aspherical glass moulding dies. International Journal of Manufacturing Technology and Management. 2006, 9(1-2): 109-119

[13] Zhang L, Zhao Y W, He X S, Kuriyagawa T.An investigation of effective area in electrorheological fluid-assisted polishing of tungsten carbide. International Journal of Machine Tools and Manufacture, 2008, 48(3-4): 295-306

[14] Preston F W. The theory and design of plate glass polishing machines. Journal of the Society Glass Technology, 1927, 11: 214-256

[15] Li H, Cheng H B, Feng Y P, Tam H Y, Wen Y F. Investigation of the electrorheological fluid for optical finishing. Frontiers of Optoelectronics in China, 2011, 4(2): 213-216

Acknowledgements

This work was supported by the National Natural Science Foundation of China (Grant No. 61128012) and the Research Grants Council of the Hong Kong Special Administrative Region (No. 9041577).

RIGHTS & PERMISSIONS

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg