Research on the dynamic mechanical characteristics and turning tool life under the conditions of excessively heavy-duty turning

Abstract

The dynamic mechanical characteristics of excessively heavy-duty cutting were analyzed based on the cutting experiments with 2.25Cr-1Mo-0.25V steel used in hydrogenated cylindrical shells. By investigating the influence of dynamic mechanical characteristics on the tools’ failure in limited heavy-duty cutting processes, the model of dynamic shearing force in the cutting area was established. However, the experimental results showed that the dynamic shear flow stress in the cutting area greatly influenced the tools’ fatigue. The heavy-duty cutting tool was damaged in the form of a shearing fracture. Through a comprehensive analysis of the theory, the critical condition of the tools’ fracture under extreme loading was established.

Keywords

extreme loading cutting / shear flow stress / dynamic cutting force / fatigue fracture

References

[1] Yang S, Tang H L. Machine Dynamics. Beijing: China Machine Press, 1985, 25–27 (in Chinese)

[2] Liu P D. New Developments in Mechanics of Cutting. Dalian: Dalian University of Technology Press, 1991, 14–15 (in Chinese)

[3] Kececioglu D. Shear-strain rate in metal cutting and its effects on shear-flow stress. ASME (B), 1985, 80: 158–165

[4] Stevenson M G, Oxley P L B. An experimental investigation of the influence of strain-rate and temperature on the flow tress properties of a low carbon steel from hot machining tests. Institution of Mechanical Engineers, 1973, 187: 263–272

[5] Sha A X, Li X W, Wang Q R. The influence the heat distortion temperature has on both the microstructure and mechanical property of TC18 titanium alloy. Chinese Journal of Nonferrous Metals, 2008, 15(8): 1167–1168 (in Chinese)

[6] He G H, Liu X L, Yan F G, Zhai Y S, Zhao Z Y. Research on the fracture and breakage of heavy-duty turning tool for rough machining hydrogenated cylindrical shell. Solid State Phenomena, 2011, 175: 305–310

[7] He G H, Liu X L, Yan F G, Hai Y S Z, Li M. Research on the application and design of special tools of the hydrogenated cylindrical shell. Advanced Materials Research, 2011, 188: 450–453

[8] Wang M J. Research on the orthogonal cutting process of metal dynamic mechanical property and thermoplastic shear instability. Dissertation for the Doctoral Degree. Dalian: Dalian University of Technology, 1988, 20–21 (in Chinese)

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg