Identification of faults through wavelet transform vis-à-vis fast Fourier transform of noisy vibration signals emanated from defective rolling element bearings

Abstract

Fault diagnosis of rolling element bearings requires efficient signal processing techniques. For this purpose, the performances of envelope detection with fast Fourier transform (FFT) and continuous wavelet transform (CWT) of vibration signals produced from a bearing with defects on inner race and rolling element, have been examined at low signal to noise ratio. Both simulated and experimental signals from identical bearings have been considered for the purpose of analysis. The bearings have been modeled as spring-mass-dashpot systems and the simulated signals have been obtained considering transfer functions for the bearing systems subjected to impulsive loads due to the defects. Frequency B spline wavelets have been applied for CWT and a discussion on wavelet selection has been presented for better effectiveness. Results show that use of CWT with the proposed wavelets overcomes the short coming of FFT while processing a noisy vibration signals for defect detection of bearings.

Graphical abstract

Keywords

Fault detection / spline wavelet / continuous wavelet transform / fast Fourier transform

References

[1] Tan A C C, Katie L M, Timms D L. A practical approach to learning vibration conditioning monitoring. World Transactions on Engineering and Technology Education, 2003, 2(2): 217−220

[2] Volker E, Matin H R. Application of kurtosis to damage mapping. Proceedings of the International Modal Analysis Conference, 1986, 629−633

[3] Randall R B. Frequency Analysis. 3rd ed. Bruel and Kjaer, 1987

[4] Ho D, Randall R B. Optimisation of bearing diagnostic techniques using simulated and actual bearing fault signals. Mechanical Systems and Signal Processing, 2000, 14(5): 763−788

[5] Tse P W, Peng Y H, Yam R. Wavelet analysis and envelope detection for rolling element bearing fault diagnosis − their effectiveness and flexibility. Journal of Vibration and Acoustics, 2001, 123(3): 303−310

[6] Patil M S, Mathew J, Kumar P K R. Bearing signature analysis as a medium for fault detection: a review. Journal of Tribology, 2008, 130(1): 014001 (7 pages)

[7] McFadden P D, Smith J D. Model for the vibration produced by a single point defect in a rolling element bearing. Journal of Sound and Vibration, 1984, 96(1): 69−82

[8] Randall R B, Antoni J. Rolling element bearing diagnostic − A tutorial. Mechanical Systems and Signal Processing, 2011, 25(2): 485−520

[9] Orhan S, Aktürk N, Çelik V. Vibration monitoring for defect diagnosis of rolling element bearings as a predictive maintenance tool: comprehensive case studies. NDT & E International, 2006, 39(4): 293−298

[10] Ocak H, Loparo K A. HMM-based fault detection and diagnosis scheme for rolling element bearing. Journal of Vibration and Acoustics, 2005, 127(4): 299−306

[11] Tse P W, Yang W, Tam H Y. Machine fault diagnosis through an effective exact wavelet analysis. Journal of Sound and Vibration, 2004, 277(4−5): 1005−1024

[12] Lin J, Zuo M J, Fyfe K R. Mechanical fault detection based on the wavelet denoising technique. Journal of Vibration and Acoustics, 2004, 126(1): 9−16

[13] Misiti M, Misiti Y, Oppenhein G, Poggi J. Wavelets and Their Application. ISTE London, 2007

[14] Chen X, Gao Z. Data processing based on wavelet analysis in structure health monitoring system. Journal of Computers, 2011, 6(12): 2686−2691

[15] Sun Q, Tang Y. Singularity analysis using continuous wavelet transform for bearing fault diagnosis. Mechanical Systems and Signal Processing, 2002, 16(6): 1025−1041

[16] Sassi S, Badri B, Thomas M A. Numerical model to predict damaged bearing vibrations. Journal of Vibration and Control, 2007, 13(11): 1603−1628

[17] Choudhury A, Tandon N. Vibration response of rolling element bearings in a rotor bearing system to a local defect under radial load. Journal of Tribology, 2006, 128(2): 252−261

[18] Nikolaou N G, Antoniadis I A. Demodulation of vibration signals generated by defects in rolling element bearing using complex shifted morlet wavelets. Mechanical Systems and Signal Processing, 2002, 16(4): 677−694

[19] Adams M L. Rotating Machinery Vibration: from Analysis to Trouble Shooting. CRC Press, 2000

[20] Hamrock B J. Fundamentals of Fluid Film Lubrication. Singapore: McGraw-Hill, 1994

[21] White Rose research online.

[22] Burgess P F J. Antifriction bearing fault detection using envelope detection. IPENZ Annual Conference, 1986

[23] Chaturved G K, Thomas D W. Adaptive noise cancellation and condition monitoring. Journal of Sound and Vibration, 1981, 76(3): 391−405

[24] Antoni J, Randall R B. Unsupervised noise cancellation for vibration signals, Part I evaluation of adaptive algorithms. Mechanical Systems and Signal Processing, 2004, 18(1): 89−101

[25] Case Western Reserve University Bearing Data Centre Website.(accessed on 2013-October-9th)

RIGHTS & PERMISSIONS

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg