Characterization of chlorine and heavy metals for the potential recycling of bottom ash from municipal solid waste incinerators as cement additives

Abstract

Industrial waste mixed with MSW is the main source of heavy metal in bottom ash.

Chlorine content in bottom ash is controlled both by plastic and kitchen waste.

Insoluble chlorine in Chinese MSWI bottom ash exists primarily as AlOCl.

Bottom ash is an inevitable by-product from municipal solid waste (MSW) incineration plants. Recycling it as additives for cement production is a promising disposal method. However, the heavy metals and chlorine are the main limiting factors because of the potential environmental risks and corrosion of cement kilns. Therefore, investigating heavy metal and chlorine characteristics of bottom ash is the significant prerequisite of its reuse in cement industries. In this study, a correlative analysis was conducted to evaluate the effect of the MSW components and collection mode on the heavy metal and chlorine characteristics in bottom ash. The chemical speciation of insoluble chlorine was also investigated by synchrotron X-ray diffraction analysis. The results showed that industrial waste was the main source of heavy metals, especially Cr and Pb, in bottom ash. The higher contents of plastics and kitchen waste lead to the higher chlorine level (0.6 wt.%–0.7 wt.%) of the bottom ash. The insoluble chlorine in the MSW incineration bottom ash existed primarily as AlOCl, which was produced under the high temperature (1250℃) in incinerators.

Graphical abstract

Keywords

Bottom ash / Chlorine / Heavy metals / Waste inputs / Synchrotron X-ray diffraction / AlOCl

References

[1] Xi B D, Li X G, Gao J X, Zhao Y, Liu H, Xia X, Yang T, Zhang L, Jia X. Review of challenges and strategies for balanced urban–rural environmental protection in China. Frontiers of Environmental Science & Engineering, 2015, 9(3): 371–384

[2] Bertolini L, Carsana M, Cassago D, Curzio A Q, Collepardi M. MSWI ashes as mineral additions in concrete. Cement and Concrete Research, 2004, 34(10): 1899–1906

[3] Chen H X, Ma X, Dai H J. Reuse of water purification sludge as raw material in cement production. Cement and Concrete Composites, 2010, 32(6): 436–439

[4] Wen Z, Chen M, Meng F. Evaluation of energy saving potential in China’s cement industry using the Asian-Pacific Integrated Model and the technology promotion policy analysis. Energy Policy, 2015, 77(1): 227–237

[5] Pan J R, Huang C, Kuo J J, Lin S H. Recycling MSWI bottom and fly ash as raw materials for Portland cement. Waste Management (New York, N.Y.), 2008, 28(7): 1113–1118

[6] Lam C H K, Ip A W M, Barford J P, Mckay G. Use of incineration MSW ash: a review. Sustainability, 2010, 2(11): 1943–1968

[7] Ferraris M, Salvo M, Ventrella A, Buzzi L, Veglia M. Use of vitrified MSWI bottom ashes for concrete production. Waste Management (New York, N.Y.), 2009, 29(3): 1041–1047

[8] Ginés O, Chimenos J M, Vizcarro A, Formosa J, Rosell J R. Combined use of MSWI bottom ash and fly ash as aggregate in concrete formulation: environmental and mechanical considerations. Journal of Hazardous Materials, 2009, 169(1–3): 643–650

[9] Cioffi R, Colangelo F, Montagnaro F, Santoro L. Manufacture of artificial aggregate using MSWI bottom ash. Waste Management (New York, N.Y.), 2011, 31(2): 281–288

[10] Ito R, Dodbiba G, Fujita T, Ahn J W. Removal of insoluble chloride from bottom ash for recycling. Waste Management (New York, N.Y.), 2008, 28(8): 1317–1323

[11] Jakob A, Stucki S, Struis R P W J. Complete heavy metal removal from fly ash by heat treatment: influence of chlorides on evaporation rates. Journal of Environmental Science & Technology, 1996, 30(30): 3275–3283

[12] Jung C H, Osako M. Thermodynamic behavior of rare metals in the melting process of municipal solid waste (MSW) incineration residues. Chemosphere, 2007, 69(2): 279–288

[13] Astrup T, Riber C, Pedersen A J. Incinerator performance: effects of changes in waste input and furnace operation on air emissions and residues. Waste Management & Research, 2011, 29(10 Suppl): 57–68

[14] Shimaoka T, Komiya T, Takahashi F, Nakayama H, Edil T, Dean S W. Dechlorination of municipal solid waste incineration residues for beneficial reuse as a resource for cement. Journal of ASTM International, 2011, 8(10): 103671

[15] Chai X, Wang D, Takahashi F, Shimaoka T. Physicochemical characterisitcs of typical fly ashes of solid waste incineration plants in China. Journal of Tongji University (Natural Science), 2012, 40(12): 1857–1862 (in Chinese)

[16] Zhang H Q, Wu W W, Wang X F. Influencing factors of the development of China’s catering industry. In: Proceedings of International Conference on Management Science and Engineering 2014, Singapore. Lancaster: DEStech Publications Inc, 2014, 767–773

[17] Funari V, Braga R, Bokhari S N H, Dinelli E, Meisel T. Solid residues from Italian municipal solid waste incinerators: a source for “critical” raw materials. Waste Management (New York, N.Y.), 2015, 45(1): 206–216

[18] Yeung Z L L, Kwok R C W, Yu K N. Determination of multi-element profiles of street dust using energy dispersive X-ray fluorescence (EDXRF). Applied Radiation and Isotopes, 2003, 58(3): 339–346

[19] Dahl O, Watkins G, Nurmesniemi H, Pöykiö R. Comparison of the characteristics of bottom ash and fly ash from a medium-size (32MW) municipal district heating plant incinerating forest residues and peat in a fluidized-bed boiler. Fuel Processing Technology, 2009, 90(8): 871–878

[20] Jacobs L, Buczynska A, Walgraeve C, Delcloo A, Potgieter-Vermaak S, Van Grieken R, Demeestere K, Dewulf J, Van Langenhove H, De Backer H, Nemery B, Nawrot T S. Acute changes in pulse pressure in relation to constituents of particulate air pollution in elderly persons. Environmental Research, 2012, 117(2): 60–67

[21] Jung C H, Matsuto T, Tanaka N, Okada T. Metal distribution in incineration residues of municipal solid waste (MSW) in Japan. Waste Management (New York, N.Y.), 2004, 24(4): 381–391

[22] Zeng X, Li J. Spent rechargeable lithium batteries in e-waste: composition and its implications. Frontiers of Environmental Science & Engineering, 2014, 8(5): 792–796

[23] Chao Z, Niu D, Zhao Y. A comprehensive overview of rural solid waste management in China. Frontiers of Environmental Science & Engineering, 2015, 9(6): 1–13

[24] Ma W, Hoffmann G, Schirmer M, Chen G, Rotter V S. Chlorine characterization and thermal behavior in MSW and RDF. Journal of Hazardous Materials, 2010, 178(1–3): 489–498

[25] Rendek E, Ducom G, Germain P. Influence of waste input and combustion technology on MSWI bottom ash quality. Waste Management (New York, N.Y.), 2007, 27(10): 1403–1407

[26] Ming Y W, Jiann H H, Chen J C. The behavior of heavy metal Cr, Pb and Cd during waste incineration in fluidized bed under various chlorine additives. Journal of Chemical Engineering of Japan, 1996, 29(3): 494–500

[27] Belevi H, Moench H. Factors determining the element behavior in municipal solid waste incinerators. 1. Field studies. Environmental Science & Technology, 2000, 34(12): 2501–2506

[28] Zhu F, Takaoka M, Shiota K, Oshita K, Kitajima Y. Chloride chemical form in various types of fly ash. Environmental Science & Technology, 2008, 42(11): 3932–3937

[29] Greenbaum M A, Blauer J A, Arshadi M R, Farber M. Heat of formation of AlOCl(g). Transactions of the Faraday Society, 1964, 60(2): 1592–1597

Acknowledgements

This work was financially supported by the international cooperation project of Chinese Ministry of Science and Technology (No. 2013DFG92600).

Funding

RIGHTS & PERMISSIONS

2016 Higher Education Press and Springer-Verlag Berlin Heidelberg