Study on HCl removal for medical waste pyrolysis and combustion using a TG-FTIR analyzer

Abstract

Under both pyrolysis and combustion condition, HCl removal efficiency for medical waste with Ca-based additives was semi-quantitatively studied by means of TG-FTIR. Additionally, the difference of HCl removal efficiency for PVC and medical waste was compared. Experimental results showed that: 1) Thermal degradation of medical waste mainly took place in two steps under both pyrolysis and combustion condition; 2) HCl emitted at both two steps and HCl concentration increased with the increased of Cl ratio in the medical waste; 3) for the same additive, HCl concentration decreased with the increased of additives amount, that is to say, HCl removal efficiency of medical waste increased as the increased of Ca/Cl molar ratio. Fourth, when Ca(OH)₂ was used as additive, HCl removal efficiency for medical waste combustion was a little higher than that for medical waste pyrolysis, but either CaCO₃ or CaO was used as additive, it was just opposite, more specifically, when CaCO₃ was used as additive with Ca/Cl=1.3, HCl removal efficiency was 5.49% under pyrolysis condition, but that was only 4.24% under combustion condition. Fifth, under the same Ca/Cl molar ratio, HCl removal efficiency for PVC was higher than that for medical waste under both pyrolysis and combustion condition, more specifically, when Ca(OH)₂ was used as additive with Ca/Cl=1, HCl removal efficiency was 64.51% for PVC, but that was only 27.66% for medical waste pyrolysis with 4% Cl under pyrolysis condition.

Keywords

pollution / medical waste / pyrolysis / combustion / TG-FTIR / HCl removal

References

[1] Lee C C, Huffman G L. Medical waste management/incineration. Journal of Hazardous Materials, 1996, 48(1–3): 1–30

[2] Ruoyan G, Lingzhong X, Huijuan L, Chengchao Z, Jiangjiang H, Yoshihisa S, Wei T, Chushi K. Investigation of health care waste management in Binzhou District, China. Waste Management, 2010, 30(2): 246–250

[3] Zhang Y, Xiao G, Wang G X, Zhou T, Jiang D W. Medical waste management in China: a case study of Nanjing. Waste Management, 2009, 29(4): 1376–1382

[4] Duan H B, Huang Q F, Wang Q, Zhou B Y, Li J H. Hazardous waste generation and management in China: a review. Journal of Hazardous Materials, 2008, 158(2–3): 221–227

[5] Alvim-Ferraz M C, Afonso S A. Incineration of healthcare wastes: management of atmospheric emissions through waste segregation. Waste Management, 2005, 25(6): 638–648

[6] Jang Y C, Lee C, Yoon O S, Kim H. Medical waste management in Korea. Journal of Environmental Management, 2006, 80(2): 107–115

[7] Kulkarni P S, Crespo J G, Afonso C A. Dioxins sources and current remediation technologies—a review. Environment International, 2008, 34(1): 139–153

[8] Xie R, Li W J, Li J, Wu B L, Yi J Q. Emissions investigation for a novel medical waste incinerator. Journal of Hazardous Materials, 2009, 166(1): 365–371

[9] Wang F K S, Chiang K Y, Lin S M, Tsai C C, Sun C J. Effects of chlorides on emission of hydrogen chloride formation in waste incineration. Chemosphere, 1999, 38(7): 1571–1582

[10] Wey M Y, Fang T J. The effect of organic and inorganic chlorides on the formation of HCl with various hydrogen containing sources in a fluidized bed incinerator. Environment International, 1995, 21(4): 423–431

[11] Hunsinger H, Jay K, Vehlow J. Formation and destruction of PCDD/F inside a grate furnace. Chemosphere, 2002, 46(9–10): 1263–1272

[12] Wang L C, Lee W J, Lee W S, Changchien G, Tsai P. Effect of chlorine content in feeding wastes of incineration on the emission of polychlorinated dibenzo-p-dioxins/dibenzofurans. Science of the Total Environment, 2003, 302(1–3): 185–198

[13] Wey M Y, Liu K Y, Yu W J, Lin C L, Chang F Y. Influences of chlorine content on emission of HCl and organic compounds in waste incineration using fluidized beds. Waste Management, 2008, 28(2): 406–415.

[14] Chiang K Y, Jih J C, Lin K L. The effects of calcium hydroxide on hydrogen chloride emission characteristics during a simulated densified refuse-derived fuel combustion process. Journal of Hazardous Materials, 2008, 157(1): 170–178

[15] Wang W Y, Ye Z C, Bjerle I. The kinetics of the reaction of hydrogen chloride with fresh and spent Ca-based desulfurization sorbents. Fuel, 1996, 75(2): 207–212

[16] Masuda Y, Uda T, Terakado O, Hirasawa M. Pyrolysis study of poly(vinyl chloride)-metal oxide mixtures: Quantitative product analysis and the chlorine fixing ability of metal oxides. Journal of Analytical and Applied Pyrolysis, 2006, 77(2): 159–168

[17] Kameda T, Uchiyama N, Park K S, Grause G, Yoshioka T. Removal of hydrogen chloride from gaseous streams using magnesium-aluminum oxide. Chemosphere, 2008, 73(5): 844–847

[18] Chyang C S, Han Y L, Wu L W, Wan H P, Lee H T, Chang Y H. An investigation on pollutant emissions from co-firing of RDF and coal. Waste Management, 2010, 30(7): 1334–1340

[19] Duo W, Kirkby N F, Seville J P K, Kiel J H A, Bos A, Den Uil H. Kinetics of HCl reactions with calcicum and sodium sorbents for IGCC fuel gas cleaning. Chemical Engineering Science, 1996, 51(11): 2541–2546

[20] Jatuphorn W, Adisak J, Vissanu M. Effect of metal compounds and experimental conditions on distribution of products from PVC pyrolysis. Journal of Polymers and the Environment, 2003, 11(1): 1–6

[21] Chibante V G, Fonseca A M, Salcedo R R. Modeling dry-scrubbing of gaseous HCl with hydrated lime in cyclones with and without recirculation. Journal of Hazardous Materials, 2010, 178(1–3): 469–482

[22] Shemwell B, Levendis Y A, Simons G A. Laboratory study on the high-temperature capture of HCl gas by dry-injection of calcium-based sorbents. Chemosphere, 2001, 42(5–7): 785–796

[23] Li S Y, Bie R S, Wang H. Experimental study on the emission and removal of HCl from incineration of chlorinated waste water in fluidized bed. Proceedings of the CSEE, 2006, 26(1): 40–44 (in Chinese)

[24] Kaminsky W, Kim J S. Pyrolysis of mixed plastics into aromatics. Journal of Analytical and Applied Pyrolysis, 1999, 51(1–2): 127–134

[25] Duo W, Sevill J P K, Kirkby N F, Clift R. Formation of product layers in solid-gas reactions for removal of acid gases. Chemical Engineering Science, 1994, 49(24): 4429–4442

[26] Bale C W, Chartrand P, Degterov S A, Eriksson G, Hack K, Ben Mahfoud R, Melançon J, Pelton A D, Petersen S. Factsage thermochemical software and databases. Calphad, 2002, 26(2): 189–228

[27] Shen X J. Studies on pyrolysis and incineration of medical waste in rotary kiln. Dissertation for the Doctoral Degree. Hangzhou: Zhejiang University, 2005: 20–25 (in Chinese)

[28] Zhu H M, Jiang X G, Yan J H, Chi Y, Cen K F. TG-FTIR analysis of PVC thermal degradation and HCl removal. Journal of Analytical and Applied Pyrolysis, 2008, 82(1): 1–9

RIGHTS & PERMISSIONS

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg