Identification and assessment of environmental burdens of Chinese copper production from a life cycle perspective

Abstract

The environmental burdens of Chinese copper production have been identified and quantified in the context of typical technologies, materials supplies and environmental emissions by a life cycle approach. Primary and secondary copper production using copper ores and scraps, respectively, were analyzed in detail. The flash and bath smelting approaches and the recycling of copper scraps were selected as representative copper production processes. A quantitative analysis was also conducted to assess the influence of material transport distance in copper production. Life cycle assessment (LCA) results showed that resources depletion and human health contribute significantly to environmental burdens in Chinese copper production. In addition, the secondary copper production has dramatically lower environmental burdens than the primary production. There is no obvious distinction in overall environmental burdens in primary copper production by flash or bath smelting approach. However, resources depletion is lower and the damage to human health is higher for flash smelting approach. Ecosystem quality damage is slight for both approaches. Environmental burdens from the mining stage contribute most in all life cycle stages in primary copper production. In secondary copper production, the electrolytic refining stage dominates. Based on the life cycle assessment results, some suggestions for improving environmental performance were proposed to meet the sustainable development of Chinese copper industry.

Keywords

copper production / environmental burden / life cycle assessment / refined copper

References

[1] China Nonferrous Metals Industry Association. The Yearbook of Nonferrous Metals Industry of China 2010. Beijing: China Nonferrous Metals Industry Association, 2011 (in Chinese)

[2] KuckshinrichsW, ZappP, PoganietzW. CO₂ emissions of global metal-industries: the case of copper. Applied Energy, 2007, 84(7-8): 842-852

[3] AlvaradoS, MaldonadoP, BarriosA, JaquesI. Long term energy-related environmental issues of copper production. Energy, 2002, 27(2): 183-196

[4] NorgateT, HaqueN. Energy and greenhouse gas impacts of mining and mineral processing operations. Journal of Cleaner Production, 2010, 18(3): 266-274

[5] WangY J, ChandlerW. The Chinese nonferrous metals industry- energy use and CO₂ emissions. Energy Policy, 2009, 38(11): 6475-6484

[6] MoH, WenZ G, ChenJ N. China’s recyclable resources recycling system and policy: a case study in Suzhou. Resources, Conservation and Recycling, 2009, 53(7): 409-419

[7] RuhrbergM. Assessing the recycling efficiency of copper from end-of-life products in Western Europe. Resources, Conservation and Recycling, 2006, 48(2): 141-165

[8] GraedelT E, van BeersD, BertramM, FuseK, GordonR B, GritsininA, KapurA, KleeR J, LifsetR J, MemonL, RechbergerH, SpatariS, VexlerD. Multilevel cycle of anthropogenic copper. Environmental Science & Technology, 2004, 38(4): 1242-1252

[9] GuoX Y, SongY. Substance flow analysis of copper in China. Resources, Conservation and Recycling, 2008, 52(6): 874-882

[10] TanimotoA H, DuranyX G, VillalbaG, PiresA C. Material flow accounting of the copper cycle in Brazil. Resources, Conservation and Recycling, 2010, 55(1): 20-28

[11] YueQ, LuZ W, ZhiS K. Copper cycle in China and its entropy analysis. Resources, Conservation and Recycling, 2009, 53(12): 680-687

[12] NorgateT, JahanshahiS. Low grade ores-Smelt, leach or concentrate? Minerals Engineering, 2010, 23(2): 65-73

[13] NorgateT E. A Comparative Life Cycle Assessment of Copper Production Processes. Clayton South: CSIRO Minerals, 2001

[14] NorgateT E, JahanshahiS, RankinW J. Assessing the environmental impact of metal production processes. Journal of Cleaner Production, 2007, 15(8-9): 838-848

[15] RuanR M, ZhongS P, WangD Z. Life cycle assessment of two copper metallurgical processes: bio-heapleach and flotation-flash smelter. China Nonferrous Metallurgy, 2010, (4): 30-33(in Chinese)

[16] FthenakisV, WangW M, KimH C. Life cycle inventory analysis of the production of metals used in photovoltaics. Renewable & Sustainable Energy Reviews, 2009, 13(3): 493-517

[17] GraedelT E, AllenbyB R. Indusrial Ecology. New Jersey: Prentice Hall, 2003

[18] AzapagicA, CliftR. The application of life cycle assessment to process optimisation. Computers & Chemical Engineering, 1999, 23(10): 1509-1526

[19] CliftR, DoigA, FinnvedenG. The application of life cycle assessment to integrated solid waste management: Part 1-Methodology. Process Safety and Environmental Protection, 2000, 78(4): 279-287

[20] HunkelerD, RebitzerG. The future of life cycle assessment. The International Journal of Life Cycle Assessment, 2005, 10(5): 305-308

[21] FinnvedenG, HauschildM Z, EkvallT, GuinéeJ, HeijungsR, HellwegS, KoehlerA, PenningtonD, SuhS. Recent developments in life cycle assessment. Journal of Environmental Management, 2009, 91(1): 1-21

[22] XieM H, LiL, QiaoQ, SunQ H, SunT C. A comparative study on milk packaging using life cycle assessment: From PA-PE-Al laminate and polyethylene in China. Journal of Cleaner Production, 2011, 19(17-18): 2100-2106

[23] ZhaoG Q, HeJ Q, WangB W, ZhangX Z. Copper Recovery, Recycling and Manufacturing Technologies. Beijing: Chemical Industry Press, 2007 (in Chinese)

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg