A new polystyrene-latex-based and EPS-containing synthetic sludge

Abstract

Since the living microorganisms in activated sludge continuously change, it is difficult to conduct controlled experiments and achieve reproducible results for evaluating sludge characteristics. Synthetic sludge, as a chemical surrogate to activated sludge, could be used to investigate the sludge physicochemical properties, and it is desirable to prepare synthetic sludge with similar structure and properties to real activated sludge to explore the flocculation and settlement processes in activated sludge systems. In this work, a high-strength synthetic sludge was prepared with functional polystyrene latex particles as the framework and extracellular polymeric substances (EPS) to modify its surface. The flocculation and settling characteristics of the microspheres and the prepared synthetic sludge were tested. Compared with other three functional polystyrene latex microspheres, the synthetic sludge prepared with EPS-modified polystyrene latex microspheres showed good settling characteristics and a significantly higher strength. They could be used for studying the physicochemical properties of activated sludge.

Keywords

activated sludge / extracellular polymeric substances (EPS) / flocculation / polystyrene latex particles / synthetic sludge

References

[1] Casellas M, Dagot C, Pons M N, Guibaud G, Tixier N, Baudu M. Characterisation of the structural state of flocculent microorganisms in relation to the purificatory performances of sequencing batch reactors. Biochemical Engineering Journal, 2004, 21(2): 171–181

[2] Vogelaar J C T, de Keizer A, Spijker S, Lettinga G. Bioflocculation of mesophilic and thermophilic activated sludge. Water Research, 2005, 39(1): 37–46

[3] Sponza D T. Investigation of extracellular polymer substances (EPS) and physicochemical properties of different activated sludge flocs under steady-state conditions. Enzyme and Microbial Technology, 2003, 32(3-4): 375–385

[4] Jorand F, Guicherd P, Urbain V, Manem J, Block J C. Hydrophobicity of activated-sludge flocs and laboratory-grown bacteria. Water Science and Technology, 1994, 30(11): 211–218

[5] Choi Y G, Kim S H, Kim H J, Kim G D, Chung T H. Improvement of activated sludge dewaterability by humus soil induced bioflocculation. Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering, 2004, 39(7): 1717–1728

[6] Sears K, Alleman J E, Barnard J L, Oleszkiewicz J A. Density and activity characterization of activated sludge flocs. Journal of Environmental Engineering, 2006, 132(10): 1235–1242

[7] Hilligardt D, Hoffmann E. Particle size analysis and sedimentation properties of activated sludge flocs. Water Science and Technology, 1997, 36(4): 167–175

[8] Snidaro D, Zartarian F, Jorand F, Bottero J Y, Block J C, Manem J. Characterization of activated sludge flocs structure. Water Science and Technology, 1997, 36(4): 313–320

[9] Klausen M M, Thomsen T R, Nielsen J L, Mikkelsen L H, Nielsen P H. Variations in microcolony strength of probe-defined bacteria in activated sludge flocs. FEMS Microbiology Ecology, 2004, 50(2): 123–132

[10] Schmid M, Thill A, Purkhold U, Walcher M, Bottero J Y, Ginestet P, Nielsen P H, Wuertz S, Wagner M. Characterization of activated sludge flocs by confocal laser scanning microscopy and image analysis. Water Research, 2003, 37(9): 2043–2052

[11] Wilén B M, Keiding K, Nielsen P H. Flocculation of activated sludge flocs by stimulation of the aerobic biological activity. Water Research, 2004, 38(18): 3909–3919

[12] Örmeci B, Vesilind P A. Development of an improved synthetic sludge: a possible surrogate for studying activated sludge dewatering characteristics. Water Research, 2000, 34(4): 1069–1078

[13] Sanin F D, Vesilind P A. Synthetic sludge: a physical/chemical model in understanding bioflocculation. Water Environment Research, 1996, 68(5): 927–933

[14] Abu-Orf M M, Dentel S K. Rheology as tool for polymer dose assessment and control. Journal of Environmental Engineering, 1999, 125(12): 1133–1141

[15] Baudez J C, Ginisty P, Peuchot C, Spinosa L. The preparation of synthetic sludge for lab testing. Water Science and Technology, 2007, 56(9): 67–74

[16] Higgins M J, Novak J T. Characterization of exocellular protein and its role in bioflocculation. Journal of Environmental Engineering, 1997, 123(5): 479–485

[17] Nguyen T P, Hankins N P, Hilal N. Effect of chemical composition on the flocculation dynamics of latex-based synthetic activated sludge. Journal of Hazardous Materials, 2007a, 139(2): 265–274

[18] Nguyen T P, Hankins N P, Hilal N. A comparative study of the flocculation behaviour and final properties of synthetic and activated sludge in wastewater treatment. Desalination, 2007, 204(1-3): 277–295

[19] Zheng H, Hua D, Bai R, Hu K, An L, Pan C. Controlled/living free-radical copolymerization of 4-(azidocarbonyl) phenyl methacrylate with methyl acrylate under ⁶⁰Coγ-ray irradiation. Journal of Polymer Science. Part A, 2007, 45(13): 2609–2616

[20] Ye Q, Zhang Z C, Jia H T, He W D, Ge X W. Formation of monodisperse polyacrylamide particles by radiation-induced dispersion polymerization: particle size and size distribution. Journal of Colloid and Interface Science, 2002, 253(2): 279–284

[21] Brown M J, Lester J N. Comparison of bacterial extracellular polymer extraction methods. Applied and Environmental Microbiology, 1980, 40(2): 179–185

[22] Sheng G P, Yu H Q, Yu Z. Extraction of extracellular polymeric substances from the photosynthetic bacterium Rhodopseudomonas acidophila. Applied Microbiology and Biotechnology, 2005, 67(1): 125–130

[23] Hussain S A, Demirci S, Özbayoğlu G. Zeta potential measurements on three clays from Turkey and effects of clays on coal flotation. Journal of Colloid and Interface Science, 1996, 184(2): 535–541

[24] Chu C P, Lee D J. Comparison of dewaterability and floc structure of synthetic sludge with activated sludge. Environmental Technology, 2005, 26(1): 1–10

[25] Eboigbodin K E, Biggs C A. Characterization of the extracellular polymeric substances produced by Escherichia coli using infrared spectroscopic, proteomic, and aggregation studies. Biomacromolecules, 2008, 9(2): 686–695

[26] Ivnitsky H, Katz I, Minz D, Shimoni E, Chen Y, Tarchitzky J, Semiat R, Dosoretz C G. Characterization of membrane biofouling in nanofiltration processes of wastewater treatment. Desalination, 2005, 185(1-3): 255–268

[27] Kazy S K, Sar P, Singh S P, Sen A K, D'Souza S F. Extracellular polysaccharides of a copper-sensitive and a copper-resistant Pseudomonas aeruginosa strain: synthesis, chemical nature and copper binding. World Journal of Microbiology & Biotechnology, 2002, 18(6): 583–588

[28] Engebretson R B, von Wandruszka R. Kinetic aspects of cation enhanced aggregation in aqueous humic acids. Environmental Science & Technology, 1998, 32(4): 488–493

Acknowledgements

Authors wish to thank the National Natural Science Foundation of China (Grant No. 50978243) for the partial support of this study.

RIGHTS & PERMISSIONS

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg